In Vivo Biological Behavior of Polymer Scaffolds of Natural Origin in the Bone Repair Process

Autologous bone grafts, used mainly in extensive bone loss, are considered the gold standard treatment in regenerative medicine, but still have limitations mainly in relation to the amount of bone available, donor area, morbidity and creation of additional surgical area. This fact encourages tissue engineering in relation to the need to develop new biomaterials, from sources other than the individual himself. Therefore, the present study aimed to investigate the effects of an elastin and collagen matrix on the bone repair process in critical size defects in rat calvaria. The animals (Wistar rats, n = 30) were submitted to a surgical procedure to create the bone defect and were divided into three groups: Control Group (CG, n = 10), defects filled with blood clot; E24/37 Group (E24/37, n = 10), defects filled with bovine elastin matrix hydrolyzed for 24 h at 37 °C and C24/25 Group (C24/25, n = 10), defects filled with porcine collagen matrix hydrolyzed for 24 h at 25 °C. Macroscopic and radiographic analyses demonstrated the absence of inflammatory signs and infection. Microtomographical 2D and 3D images showed centripetal bone growth and restricted margins of the bone defect. Histologically, the images confirmed the pattern of bone deposition at the margins of the remaining bone and without complete closure by bone tissue. In the morphometric analysis, the groups E24/37 and C24/25 (13.68 ± 1.44; 53.20 ± 4.47, respectively) showed statistically significant differences in relation to the CG (5.86 ± 2.87). It was concluded that the matrices used as scaffolds are biocompatible and increase the formation of new bone in a critical size defect, with greater formation in the polymer derived from the intestinal serous layer of porcine origin (C24/25).     

Un principe d'invariance relatif à un processus généralisant le mouvement brownien N-dimensionnel

We prove that the generalized random walks associated to a root system R in $\text{R}{}^{\mathrm{N}}$ and a nonnegative multiplicity function k defined on R, converge in distribution (if suitably normalized) to a Markov process with càdlàg trajectories and infinitesimal generator a differential-difference operator on $\text{R}{}^{\mathrm{N}}$ which generalizes the usual Laplacian. To cite this article: L. Gallardo, L. Godefroy, C. R. Acad. Sci. Paris, Ser. I 338 (2004).     

The 3-D FEL pulse propagation equation: An analytical treatment in the low-gain and small-signal regime

Summary In this paper we show that the transverse mode evolution of a FEL operating with short pulses can be treated, in the small-signal and low-gain regime, using a relatively simple mathematical technique leading to a potentially fast numerical algorithm. We also point out that analytical solutions can be obtained for the cases where the slippage length is small compared to the longitudinal bunch length.     

Synthesis and Inclusion Properties of the Host Compound 1,3-Dihydro-1,1,3,3-tetraphenylisobenzofuran. X-Ray Crystal Structures of the Free Host and of an Inclusion Compound with 1,4-Dioxane

A novel host molecule, 1, suitable for crystalline lattice-type inclusion, has been synthesized, and its cocrystal formation ability has been investigated. Host 1 proved to be of potential use for organic solvent separation and retrieval, and a promising auxiliary for solidification of certain odorous substances. The crystal structures of the solvent-free host 1, and its complex with 1,4-dioxane (1 : 1), have been determined by single crystal X-ray diffraction. The structure of 1 (guest-free) is triclinic, P , with a = 9.452(2), b = 10.359(3), c = 13.116(3) Å, = 101.80(2), = 106.53(1) and = 104.32(1)°. The spacious, propeller-like molecules are held together by weak van der Waals' forces. The dioxane inclusion compound is monoclinic, P21/a, with a = 15.050(1), b = 8.641(1) and c = 20.658(1) Å, and = 94.56(1)°, and contains two crystallographically independent guest molecules, both located around symmetry centres. The molecular packing seems to be governed by C—H···O type bonds (C···O = 3.31 and 3.48 Å) from the host to the dioxane oxygens.     

Development and application of an integrated system for monitoring ethanol content of fuels

An automated flow injection analysis (FIA) system for quantifying ethanol was developed using alcohol oxidase, horseradish peroxidase, 4-aminophenazone, and phenol. A colorimetric detection method was developed using two different methods of analysis, with free and immobilized enzymes. The system with free enzymes permitted analysis of standard ethanol solution in a range of 0.05–1.0 g of ethanol/L without external dilution, a sampling frequency of 15 analyses/h, and relative SD of 3.5%. A new system was designed consisting of a microreactor with a 0.91-mL internal volume filled with alcohol oxidase immobilized on glass beads and an addition of free peroxidase, adapted in an FIA line, for continued reuse. This integrated biosensor-FIA system is being used for quality control of biofuels, gasohol, and hydrated ethanol. The FIA system integrated with the microreactor showed a calibration curve in the range of 0.05–1.5 g of ethanol/L, and good results were obtained compared with the ethanol content measured by high-performance liquid chromatography and gas chromatography standard methods.     

Electrochemical oxidation of aliphatic amines and their attachment to carbon and metal surfaces

The electrochemical oxidation of aliphatic amines (primary, secondary, and tertiary) has been investigated by cyclic voltammetry and preparative electrolysis. The oxidation mechanisms have been established, and the lifetimes of the radical cations have been measured for secondary and tertiary amines. These results have been put in parallel with the attachment of amines to glassy carbon, Au, and Pt electrodes by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and infrared reflection-absorption spectroscopy (IRRAS). It is then possible to show that it is not the radical cation but the radical obtained after the deprotonation which reacts with the electrode surface. XPS results also point to the existence of a covalent bond between Au or Pt and the organic moiety.     

Supramolecular adducts between macrocyclic Gd(iii) complexes and polyaromatic systems: a route to enhance the relaxivity through the formation of hydrophobic interactions

The set-up of reversible binding interactions between the hydrophobic region of macrocyclic GBCAs (Gadolinium Based Contrast Agents) and SO₃⁻/OH containing pyrene derivatives provides new insights for pursuing relaxivity enhancements of this class of MRI contrast agents. The strong binding affinity allows attaining relaxation enhancements up to 50% at pyrene/GBCA ratios of 3 : 1. High resolution NMR spectra of the Yb-HPDO3A/pyrene system fully support the formation of a supramolecular adduct based on the set-up of hydrophobic interactions. The relaxation enhancement may be accounted for in terms of the increase of the molecular reorientation time (τ_R) and the number of second sphere water molecules. This effect is maintained in blood serum and in vivo, as shown by the enhancement of contrast in T_1w-MR images obtained by simultaneous injection of GBCA and pyrene derivatives in mice.

The set-up of reversible binding interactions between the hydrophobic region of macrocyclic gadolinium based contrast agents and SO₃⁻/OH containing pyrene derivatives provides new insights for pursuing relaxivity enhancement of MRI contrast agents.     

Spectroscopic and photochemical properties of the lichen compound lobaric acid

Lichens synthesize and accumulate photoprotective compounds against possible damage induced by UV radiation in the photobiont. A biological model has been recently formulated that allows the use of lichens to evaluate changes at different UV radiation levels. The thermodynamics, photophysical and photochemical properties of lobaric acid were studied in acetonitrile, ethanol and Brij 35(3%) micelles at different pH values. Also the sun protector factor (SPF) was determined by in vitro methods. Lobaric acid was extracted from Stereoculon alpinum Laur. and characterized by means of standard procedures. Solutions were irradiated in oxygen and under nitrogen conditions with a UV medium pressure lamp. Lobaric acid absorbs at 287, 303 nm, and no fluorescence emission was observed. The maximum value of the molar extinction coefficient (5479.6 M(-1) cm(-1)) was obtained in Brij 35 at pH 12. Solubility is pH dependant and is highest in Brij 35 at pH 12 (4.45 x 10(-4) M). Photoconsumption quantum yields ranged between 10(-4) and 10(-5) in aerobic and anaerobic experimental conditions. Lobaric acid SPF was very low (0.5) compared with homosalate (4.0), (reference solar filter). Two pKa values, 5.05 (carboxylic acid group deprotonation) and 9.75 (phenolic OH deprotonation), were determined.     

Copper bronze catalyzed Heck reaction in ionic liquids

Heck reaction of aryl iodides and activated aryl bromides catalyzed by copper bronze in tetrabutylammonium bromide as solvent and tetrabutylammonium acetate as base was developed. The effective catalysts are Cu nanoparticles deriving from the reaction of iodobenzene with copper bronze. These nanoparticles are very stable in tetraalkylammonium salts, are easily recycled, and can be stored for months without a loss of catalytic efficiency. [reaction: see text]     

Alkylation of nitroaromatics with tetraalkylborate ion via electrochemical oxidation

Aromatic nucleophilic substitution reaction (S(N)Ar) is one of the most thoroughly studied reactions. Alkylation of nitroaromatics with Grignard reagents via chemical oxidation of the sigma(H)-complexes is the most general method to introduce an alkyl group into a nitroaromatic compound. This approach has considerable drawbacks, especially when more than one nitro group are present in the aromatic ring. In this article, we present an electrochemical approach, which offers a new very selective methodology for obtaining alkyl polynitroaromatic compounds. Different strategies based on the use of tetralkylborate anion as nucleophiles are used so as to increase efficiency and to reduce the drawbacks associated with this reaction. A wide list of dinitro- and trinitro-aromatic compounds are studied, the range of yields obtained being from fair (40%) to excellent (85%). The key to improvement in the process is the use of electrochemical techniques for the oxidation of the mixture sigma(H)-complexes/tetrabutylborate ion. The electroactive character of the nucleophile, which can be oxidized to an alkyl radical, means that the S(N)Ar of the hydrogen polar mechanism is not the only mechanism operating during the electroxidation process, since the hydrogen radical S(N)Ar mechanism is running at the same time. Electrochemical mechanistic studies allow the participation of each mechanism in the global product yield obtained to be quantified.