Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N₂ adsorption/desorption (BET), temperature-programmed reduction and desorption (H₂-TPR and O₂-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH₄ oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl₂O₄ catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl₂O₄ has acceptable stability during 600 min time of reaction.

Graphical abstract

     

Modified lattice Boltzmann solution for non-isothermal rarefied gas flow through microchannel utilizing BSR and second-order implicit schemes

Journal of Thermal Analysis and Calorimetry - Thermal microscale gas flow was simulated into a coplanar microchannel was simulated at a broad range of Knudsen numbers. Attempts were made to improve...     

Excitation of plant growth in dormant temperature by steady magnetic field

Experimental results of applying a steady magnetic field (20 and 30 mT) on agricultural plants reveal that their growth is more than that of control plants. Considering that these plants have ferritin cells, and each ferritin cell has 4500 Fe atoms, it is obvious that they have an outstanding role in the plants’ growth. As the last spin magnetic moment (SMM) of the Fe atom posed to an external magnetic field (EMF), the composition of SMM and EMF create an oscillator in the system. Then we have a moment of force on ferritin cells. This oscillator exerts its energy, then damps and finally locates in the field direction. The relaxed energy increased the internal temperature (i.e., the effective temperature of the magnetic spin system of plant) so that it is situated in a proper temperature for growing. This phenomenon (temperature increasing) occurs in the initial minutes of applying the magnetic field. So it depends on the number of times of locating the plant in magnetic field in a day (n). If this number (n) passes the critical value, the plant reaches a burning temperature and growth is perturbed. In this paper, the plant growth rate and critical temperature in a steady magnetic field were investigated and formulated theoretically. An innovative result in this research is as follows: if a plant's environment was in the dormant temperature, we could increase the internal temperature of the plant by applying a magnetic field n times in a day (for growth).     

Effect of electric field strength and exposure time on epoxy and high density polyethylene measured by positron annihilation lifetime

Using the positron annihilation lifetime technique, the annihilation parameters have been measured for epoxy and high density polyethylene (HDPE) as a function of AC electric field strength and the exposure time. The lifetime spectra have been resolved into three components, the longest component (I₃₃) is attributed to the pick-off annihilation of o-Ps in the amorphous regions. The intermediate one (I₂₂) is due to the annihilation of free positrons, while the shorter component (I₁₁) stems from self annihilation of p-Ps. In HDPE, the o-Ps parameters ₃ andI ₃ are measured as a function of electric field strengths in the range from 10 to 100 kV/cm exposed for 24 hours. A decrease inI ₃ of 8% is observed from zero to 50 kV/cm followed by an increase of the same order from 50 to 100 kV/cm. By investigating the effect of the exposure time from 2 to 24 hours at 16 and 50 kV/cm, the effect is confirmed and is attributed to the inhibition of o-Ps formation at lower field strength. In epoxy, the effect or exposure time onI ₃ at 166 and 133 kV/cm shows a similar behavior as in HDPE. At 133 kV/cmI ₃ decreases by only 2.5%. On the other hand, the changes in ₃ occur at short exposure times. Again at large times the saturation is obtained. These effects are attributed to the expansion of free volume (increase of ₃) competing at longer exposure times with other phenomena, such as liberation of free radicals, which reduce the o-Ps intensityI ₃ through the conversion to p-Ps. The reactions between o-Ps and free radicals might also lead to free positrons, which could explain the increase ofI ₂ and the decrease of ₃ at longer exposure times.     

An injectable chitosan-based hydrogel reinforced by oxidized nanocrystalline cellulose and mineral trioxide aggregate designed for tooth engineering applications

The complex anatomy of teeth limits the accessibility and efficacy of regenerative treatments. Therefore, the application of well-known inducers as injectable hydrogels for the regeneration of the dentin-pulp complex is considered a promising approach. In this regard, this study aimed to develop an injectable hydrogel containing mineral trioxide aggregate (MTA). The injectable chitosan/oxidized-nanocrystalline cellulose/MTA (CS/OCNC/MTA) hydrogels were prepared, and the physicochemical properties of these hydrogels were evaluated by TGA, FTIR, Rheological analysis, and SEM. Moreover, the effect of MTA on the swelling and degradability of scaffolds was assessed. The proliferative effects of synthesized hydrogels were also determined on human dental pulp stem cells (hDPSCs) by MTT assay. For induction of differentiation and biomineralization in these cells, the alkaline phosphatase activity and Alizarin Red S staining tests were performed in the presence of fabricated scaffolds. The proliferation of hDPSCs was significantly increased in the presence of these hydrogels. Moreover, the addition of MTA to hydrogel structure dramatically improved the differentiation of hDPSCs. These results suggested that this novel injectable hydrogel provides appropriate physiochemical properties and can be considered a promising scaffold for regenerative endodontic procedures.

Graphical abstract

     

Poly(N‐Bromobenzene‐1,3‐Disulfonylamide), N,N,N′,N′‐Tetrabromobenzene‐1,3‐Disulfonylamide and DABCO‐Bromine Complex: As Novel Reagents for the Oxidative Coupling of Thiols to Disulfides

An efficient method for the oxidative coupling of thiols to their corresponding disulfides by new reagents poly(N‐bromobenzene‐1,3‐disulfonylamide) PBBS , N,N,N′,N′‐tetrabromobenzene‐1,3‐disulfonylamide TBBDA and DABCO‐bromine complex is described. The reaction was applicable to a variety of thiols with high chemoselectivity.     

Tribromoisocyanuric Acid (TBCA) and Oxone®‐MX Systems as Oxidizing Agents: Oxidative Coupling of Thiols to Their Corresponding Disulfides under Mild and Heterogeneous Conditions

Tribromoisocyanuric acid (TBCA) and Oxone^®‐MX systems were used as effective oxidizing agents for the oxidation of thiols to their corresponding disulfides under mild conditions at room temperature with good to excellent yields.     

4,4-Acetalidine-bis-(3-methyl isoxazolone-5) as a new colorimetric reagent for the determination of palladium and uranium

Summary Palladium and uranium react with 4,4-acetalidine-bis-(3-methyl isoxazolone-5) in acid medium to give yellow color having a visual limit of identification at 2 and 15g per ml. This color reaction provides the basis of a new method for colorimetric determination of palladium and uranium. Copper also gives yellow color but it cannot be determined with this color reaction because the color intensity is not stable. The maximum tolerable limit of various ions is reported.

---

Zusammenfassung Pd und U reagieren in saurem Milieu mit 4,4-Acetalidin-bis-(3-methyl-isoxazolon-5) unter Gelbfärbung mit einer Erfassungsgrenze von 2 bzw. 15g/ml. Diese Farbreaktion dient als Grundlage für eine neue kolorimetrische Methode für Pd und U. Cu gibt zwar auch eine Gelbfärbung, kann aber damit nicht bestimmt werden, da die Farbintensität nicht beständig ist. Die maximal tolerierbare Menge der Fremdionen wird angegeben.

     

Domino "[3+3]-cyclization-homo-Michael" reactions of 1,3-bissilyl enol ethers with 1,1-diacylcyclopropanes

The Lewis acid mediated domino "[3+3]-cyclization-homo-Michael" reaction of 1,3-bissilyl enol ethers with 1,1-diacylcyclopropanes allows an efficient one-pot synthesis of functionalized salicylates containing a halogenated side chain. A great variety of substitution patterns could be realized by variation of the starting materials and of the Lewis acid. The mechanism of the domino process was studied.