Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N₂ adsorption/desorption (BET), temperature-programmed reduction and desorption (H₂-TPR and O₂-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH₄ oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl₂O₄ catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl₂O₄ has acceptable stability during 600 min time of reaction.

Graphical abstract

     

Modified lattice Boltzmann solution for non-isothermal rarefied gas flow through microchannel utilizing BSR and second-order implicit schemes

Journal of Thermal Analysis and Calorimetry - Thermal microscale gas flow was simulated into a coplanar microchannel was simulated at a broad range of Knudsen numbers. Attempts were made to improve...     

Pentadiagonal Oscillatory Matrices with Two Spectrum in Common

We denote the spectrum of an square matrix A by σ(A), and that of the matrix obtained by deleting the first i rows and columns of A by σ_i(A). It is known that a symmetric pentadiagonal oscillatory (SPO) matrix may be constructed from σ, σ₁ and σ₂. The pairs σ, σ₁ and σ₁, σ₂ must interlace; the construction is not unique; and the conditions on the data which ensure that A is oscillatory are extremely complicated. Given one SPO matrix A, the paper shows that operations may be applied to A to construct a family of such matrices with σ and σ₁ in common. Moreover, given one totally positive (TP) matrix A, we construct a family of TP matrices with σ, σ₁ and σ₂ in common.     

Spectrophotometric and AAS determination of trace amounts of cobalt after preconcentration by using alpha-benzilmonoxime-microcrystalline naphthalene.

The formed cobalt-a-benzilmonoxime complex was adsorbed onto microcrystalline naphthalene. Then it was determined by zero and first derivative spectrophotometry and by atomic absorption spectrophotometry (AAS) after dissolving into chloroform and methylisobutylketone (MIBK), respectively. Under optimum conditions, cobalt in the range of 1.0 - 20.0, 0.4 - 30.0 and 2.5 - 50.0 microg could be determined by spectrophotometry, first derivative spectrophotometry and AAS method, respectively. By the method, a preconcentration factor equal to approximately 30 for cobalt was obtained. The effect of diverse ions on the determination of 5.0 microg cobalt was also studied. The method was successfully applied to some pharmaceuticals and synthetic alloy samples.     

A Symmetric-Impulse Approximation Applied to the Faddeev Theory on the Charge Transfer Amplitude

Off-the-shell anomalous factors of the two-body Coulomb transition matrices appear in the integral form of the Faddeev second-order nuclear-electronic amplitude, for proton-hydrogen charge transfer scattering in a typical nlm → n′l′m′ transition. A symmetric-impulse approximation (SIA) is applied to eliminate these factors and an induction method is proposed to analytically calculate the remaining integrals. The nuclear-electronic amplitude is derived for the general case, and for totally symmetric collisions, in terms of generalized hypergeometric functions of two variables, F ₄, and of one variable, ₃ F ₂, respectively. The angular distribution of the second-order nuclear-electronic charge transfer amplitude shows the Thomas mechanism as a peak or a hump for symmetric and asymmetric collisions. There also exists a peak in the forward angular distribution of the second-order nuclear-electronic amplitude, which partly cancels the kinematic peak in the angular distribution of the charge transfer differential cross sections.     

Excitation of plant growth in dormant temperature by steady magnetic field

Experimental results of applying a steady magnetic field (20 and 30 mT) on agricultural plants reveal that their growth is more than that of control plants. Considering that these plants have ferritin cells, and each ferritin cell has 4500 Fe atoms, it is obvious that they have an outstanding role in the plants’ growth. As the last spin magnetic moment (SMM) of the Fe atom posed to an external magnetic field (EMF), the composition of SMM and EMF create an oscillator in the system. Then we have a moment of force on ferritin cells. This oscillator exerts its energy, then damps and finally locates in the field direction. The relaxed energy increased the internal temperature (i.e., the effective temperature of the magnetic spin system of plant) so that it is situated in a proper temperature for growing. This phenomenon (temperature increasing) occurs in the initial minutes of applying the magnetic field. So it depends on the number of times of locating the plant in magnetic field in a day (n). If this number (n) passes the critical value, the plant reaches a burning temperature and growth is perturbed. In this paper, the plant growth rate and critical temperature in a steady magnetic field were investigated and formulated theoretically. An innovative result in this research is as follows: if a plant's environment was in the dormant temperature, we could increase the internal temperature of the plant by applying a magnetic field n times in a day (for growth).     

Effect of electric field strength and exposure time on epoxy and high density polyethylene measured by positron annihilation lifetime

Using the positron annihilation lifetime technique, the annihilation parameters have been measured for epoxy and high density polyethylene (HDPE) as a function of AC electric field strength and the exposure time. The lifetime spectra have been resolved into three components, the longest component (I₃₃) is attributed to the pick-off annihilation of o-Ps in the amorphous regions. The intermediate one (I₂₂) is due to the annihilation of free positrons, while the shorter component (I₁₁) stems from self annihilation of p-Ps. In HDPE, the o-Ps parameters ₃ andI ₃ are measured as a function of electric field strengths in the range from 10 to 100 kV/cm exposed for 24 hours. A decrease inI ₃ of 8% is observed from zero to 50 kV/cm followed by an increase of the same order from 50 to 100 kV/cm. By investigating the effect of the exposure time from 2 to 24 hours at 16 and 50 kV/cm, the effect is confirmed and is attributed to the inhibition of o-Ps formation at lower field strength. In epoxy, the effect or exposure time onI ₃ at 166 and 133 kV/cm shows a similar behavior as in HDPE. At 133 kV/cmI ₃ decreases by only 2.5%. On the other hand, the changes in ₃ occur at short exposure times. Again at large times the saturation is obtained. These effects are attributed to the expansion of free volume (increase of ₃) competing at longer exposure times with other phenomena, such as liberation of free radicals, which reduce the o-Ps intensityI ₃ through the conversion to p-Ps. The reactions between o-Ps and free radicals might also lead to free positrons, which could explain the increase ofI ₂ and the decrease of ₃ at longer exposure times.     

4,4-Acetalidine-bis-(3-methyl isoxazolone-5) as a new colorimetric reagent for the determination of palladium and uranium

Summary Palladium and uranium react with 4,4-acetalidine-bis-(3-methyl isoxazolone-5) in acid medium to give yellow color having a visual limit of identification at 2 and 15g per ml. This color reaction provides the basis of a new method for colorimetric determination of palladium and uranium. Copper also gives yellow color but it cannot be determined with this color reaction because the color intensity is not stable. The maximum tolerable limit of various ions is reported.

---

Zusammenfassung Pd und U reagieren in saurem Milieu mit 4,4-Acetalidin-bis-(3-methyl-isoxazolon-5) unter Gelbfärbung mit einer Erfassungsgrenze von 2 bzw. 15g/ml. Diese Farbreaktion dient als Grundlage für eine neue kolorimetrische Methode für Pd und U. Cu gibt zwar auch eine Gelbfärbung, kann aber damit nicht bestimmt werden, da die Farbintensität nicht beständig ist. Die maximal tolerierbare Menge der Fremdionen wird angegeben.

     

Domino "[3+3]-cyclization-homo-Michael" reactions of 1,3-bissilyl enol ethers with 1,1-diacylcyclopropanes

The Lewis acid mediated domino "[3+3]-cyclization-homo-Michael" reaction of 1,3-bissilyl enol ethers with 1,1-diacylcyclopropanes allows an efficient one-pot synthesis of functionalized salicylates containing a halogenated side chain. A great variety of substitution patterns could be realized by variation of the starting materials and of the Lewis acid. The mechanism of the domino process was studied.