Radiation synthesis of n-vinyl 2-pyrrolidone/acrylonitrile interpenetrating polymer networks and their use in uranium recovery from aqueous systems

Interpenetrating Polymer Networks (IPNs) based on Poly n-vinyl 2-pyrrolidone (PVP) and Acrylonitrile (AN) were prepared by irradiating PVP solutions prepared in AN. PVP/AN mixtures were irradiated by ⁶⁰Co-γ rays at room temperature at a dose rate of 0.5 kGy/hour. IPNs were characterized by using FT-IR and Thermal Analysis techniques. The chelating adsorbents containing amidoxime groups were prepared by the reaction of these IPNs with hydroxylamine in aqueous NaOH solution at 50°C. These amidoxime containing adsorbents were used in adsorption studies for the recovery of uranium from aqueous systems. The adsorption capacity of an IPN with equivolume fraction of PVP and amidoximated PAN was found to be 750mg UO₂²⁺/g dry amidoximated IPN.     

Determination of the complex formation constants for some water-soluble polymers with trivalent metal ions by differential pulse polarography

The formation of metal complexes between water-soluble polymers, poly(vinyl alcohol) [PVA], poly(N-vinylpyrrolidone) [PVP], poly(acrylamide) [PAAm] and poly(ethylene oxide) [PEO] with trivalent metal ions, Fe³⁺, Cr³⁺, and V³⁺ were studied by using differential pulse polarography (DPP). The general experimental observation is the shift of totally reversible reduction peaks (M³⁺+Hg+e^–M²⁺+Hg) towards more negative potentials when the complexing water-soluble polymers are added to the solution of trivalent metal ions. The negative shift in potential permitted the determination of complex formation constants (K_f) between trivalent metal ions and water soluble polymers. The complex formation constants for Fe³⁺, Cr³⁺, and V³⁺ ions with these polymers increased in the order of V³⁺>Cr³⁺>Fe³⁺.     

On the embedding of some linear spaces in finite projective planes

The problem of embedding of linear spaces in finite projective planes has been examined by several authors ([1], [2], [3], [4], [5], [6]). In particular, it has been proved in [1] that a linear space which is the complement of a projective or affine subplane of order m is embeddable in a unique way in a projective plane of order n. In this article, we give a generalization of this result by embedding linear spaces in a finite projective plane of order n, which are complements of certain regularA-affine linear spaces with respect to a finite projective plane.     

Novel metal complexes containing 6-methylpyridine-2-carboxylic acid as potent α-glucosidase inhibitor: synthesis,crystal structures,DFT calculations,and molecular docking

Molecular Diversity - The World Health Organization (WHO) report shows that diabetes mellitus (DM) will be one of the ten deadly diseases in the near future. The best way to prevent DM is to...     

Preparation of quaternized dimethylaminoethylmethacrylate grafted nonwoven fabric for the removal of phosphate

Dimethylaminoethylmethacrylate (DMAEMA) grafted polyethylene/polypropylene (PE/PP) nonwoven fabric was prepared by radiation-induced graft polymerization. Grafting conditions were optimized and about 150% DMAEMA grafted samples were used for further experiments. DMAEMA graft chains were later quaternized with dimethyl sulphate for the removal of phosphate ions. Adsorption experiments were conducted with quaternized DMAEMA grafted fabric for phosphate removal at low (0.5–25 ppm) and high phosphate concentrations (50–1000 ppm). Adsorbed phosphate amounts at pH 7 were found to be 63 mg phosphate/g polymer and 512 mg phosphate/g polymer for low (25 ppm) and high phosphate concentrations (1000 ppm) respectively showing the efficiency of the adsorbent material in removing phosphate. The pH effect on phosphate adsorption showed that the quaternized DMAEMA grafted nonwoven fabric can adsorb phosphate over a wide pH range (5.00–9.00) indicating that adsorbent material can effectively remove different forms of phosphate ions, namely H₂PO₄^?, HPO₄^2? and PO₄^3? in aqueous solution at this pH range where the species exist. Competitive adsorption experiments were also carried out with two concentration levels at pH 7 to investigate the effect of competing ions. Phosphate adsorption on quaternized DMAEMA grafted nonwoven fabric was found to be higher than the other competing ions at two concentration levels. At high concentration level, the adsorption order was phosphate>nitrite>bromide>sulphate>nitrate whereas at low concentration level, the order was phosphate?sulphate>bromide>nitrite>nitrate.     

Comparison of pre-irradiation and mutual grafting of 2-chloroacrylonitrile on cellulose by gamma-irradiation

Radiation-induced graft polymerization is one of the best methods for obtaining materials with new properties. In this work, radiation grafting of 2-chloroacrylonitrile to cellulose by mutual and pre-irradiation grafting methods was investigated. The grafting yield was enhanced by applying the emulsion grafting method. The grafting yield determined in the above systems was observed as 27% at highest and 6% at lowest. The effects of concentration of monomer, reaction time and reaction temperature on grafting yield were studied. Evidence of grafting has been based on the comparative studies of cellulose and grafted cellulose by infrared spectroscopy, thermal analysis and contact angle measurement. Grafting enhances thermal stability of cellulose backbone.     

Preservation of beech and spruce wood by allyl alcohol-based copolymers

Allyl alcohol (AA), acrylonitrile (AN), methyl methacrylate (MMA), monomers and monomer mixtures AA+AN, AA+MMA were used to conserve and consolidate Beech and Spruce. After impregnation, copolymerisation and polymerisation were accomplished by gamma irradiation. The fine structure of wood+polymer(copolymer) composites was investigated by Scanning Electron Microscopy (SEM). It was observed that copolymer obtained from AA+MMA monomer mixture showed the optimum compatibility. The compressional strength and Brinell Hardness Numbers determined for untreated and treated wood samples indicated that the mechanical strength of wood+copolymer composites was increased. It was found that the mechanical strength of the wood samples containing the AA+MMA copolymer was higher than the others. In the presence of P(AA/MMA), at highest conversion, the compressive strength perpendicular to the fibres in Beech and Spruce increased approximately 100 times. The water uptake capacity of wood+copolymer composites was observed to decrease by more than 50% relative to the original samples, and biodegradation did not take place.