Dielectric relaxation analysis of starch oligomers and polymers with respect to their chain length

Starch belongs to the polyglucan group. This type of polysaccharide shows a broad β-relaxation process in dielectric spectra at low temperatures, which has its molecular origin in orientational motions of sugar rings via glucosidic linkages. This chain dynamic was investigated for α(1,4)-linked starch oligomers with well-defined chain lengths of 2, 3, 4, 6, and 7 anhydroglucose units (AGUs) and for α(1,4)-polyglucans with average degrees of polymerization of 5, 10, 56, 70, and so forth (up to 3000; calculated from the mean molecular weight). The activation energy (E_a) of the segmental chain motion was lowest for dimeric maltose (E_a = 49.4 ± 1.3 kJ/mol), and this was followed by passage through a maximum at a degree of polymerization of 6 (E_a = 60.8 ± 1.8 kJ/mol). Subsequently, E_a leveled off at a value of about 52 ± 1.5 kJ/mol for chains containing more than 100 repeating units. The results were compared with the values of cellulose-like oligomers and polymers bearing a β(1,4)-linkage. Interestingly, the shape of the E_a dependency on the chain length of the molecules was qualitatively the same for both systems, whereas quantitatively the starch-like substances generally showed higher E_a values. Additionally, and for comparison, three cyclodextrins were measured by dielectric relaxation spectroscopy. The ringlike molecules, with 6, 7, and 8 α(1,4)-linked AGUs, showed moderately different types of dielectric spectra. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 188–197, 2004     

On the computation of scaling coefficients of Daubechies' wavelets

In the present paper, Daubechies' wavelets and the computation of their scaling coefficients are briefly reviewed. Then a new method of computation is proposed. This method is based on the work [7] concerning a new orthonormality condition and relations among scaling moments, respectively. For filter lengths up to 16, the arising system can be explicitly solved with algebraic methods like Gröbner bases. Its simple structure allows one to find quickly all possible solutions.     

Organotin and tin(IV) derivatives of dimethyldithioarsinic acid

Organotin derivatives of dimethyldithioarsinic (dithocacodylic) acid have been obtained from the appropriate organotin chloride and the sodium salt of the latter. Tin(IV) chloride and NaS₂AsMe₂ · 2 H₂O yielded only two products, namely Cl₂Sn(S₂AsMe₂)₂ and Sn (S₂AsMe₂)₄, regardless of the reagent ratio. Spectroscopic characterization of the compounds (infrared and¹H NMR) provides structural information suggesting that the dimethyldithioarsinato group behaves as monodentate (or anisobidentate) ligand in Me₂Sn(S₂AsMe₂)₂, Bu₂Sn-(S₂AsMe₂)₂ and Cy₃Sn(S₂AsMe₂), as bidentate in Ph₂Sn(S₂AsMe₂)₂, Ph₃Sn(S₂AsMe₂) and Cl₂As(S₂AsMe₂)₂, whereas Sn(S₂AsMe₂)₄ contains both mono- and bidentate ligands, presumably in a six-coordinate structure.     

Synthese de composes dihydro-2,3 furanniques par hydroboration d'alcools β-acetyleniques

Hydroboration of β-acetylenic alcohols followed by NaOH/H₂O₂ oxidation leads to hemiacetals of γ-aldols which are easily dehydrated to 2,3-dihydrofuran compounds. The reaction gives good yields with hindered alcohols and its stereochemistry may be controlled during the organometallic synthesis of the starting alcohol.     

Resolution enhancement in multidimensional solid-state NMR spectroscopy of proteins using spin-state selection

We show that the resolution of homonuclear multidimensional solid-state NMR correlation experiments can be significantly improved using transition selection and spin-state-selective polarization transfer techniques. The selection and transfer of single states allow the removal of the J-coupling contribution from the line width in both the direct and indirect spectral dimensions. This is demonstrated with a new spin-state-selective CO-Calpha correlation experiment, applied to a microcrystalline 85-residue protein. With this new sequence, all four components of the CO-Calpha cross-peaks are separated into different spectra, obtained by linear combination of four recorded data sets. Line narrowing of up to 44% was obtained on the protein sample for the spin-state-selective CO-Calpha spectrum compared to a standard spin-diffusion experiment. The new technique also allows an easy distinction between "direct" and "relayed" transfer cross-peaks.     

A liquid chromatography/electrospray ionization-tandem mass spectrometry method for quantification of specific organophosphorus pesticide biomarkers in human urine

Organophosphorus pesticides are commonly used in both agricultural and residential settings. The widespread use of these chemicals makes it almost impossible for humans to avoid exposure. In order to determine background human exposure, there is a need for fast, reliable, and sensitive analytical methods. We have developed a sensitive method to quantify specific biomarkers of the organophosphorus pesticides acephate, azinphos, chlorpyrifos, coumaphos, diazinon, isazofos, malathion, methamidophos, parathion and pirimiphos or their O,O-dimethyl analogues in human urine, as their selective metabolites or as the intact pesticide. Isotopically labeled internal standards were used for eight of the analytes. The use of labeled internal standards in combination with high-performance liquid chromatography electrospray ionization–tandem mass spectrometry provided a high degree of specificity. Repeated analysis of urine samples fortified with high and low concentrations of the analytes gave relative standard deviations (RSD) of less than 10% for the analytes with an isotopically labeled standard. Analytes without isotopically labeled standards had higher RSD. For all compounds except methamidophos and acephate, the recoveries were greater than 70%. The limits of quantification for most of the analytes were in the range of 0.1 to 1 ng/mL. We detected concentrations of most of these pesticides and/or their metabolites in urine samples from non-occupationally exposed persons using our method. Our frequencies of detection for the analytes measured ranged from 1% to 98%.     

Complexes self‐associate by hydrogen bonding and metallophilic attraction: Theoretical study

Hydrogen bonding and metallophilic attractions are studied in the model systems: [(AuNH₃Cl)₂], [(AuNH(CH₃)₂Cl)₂], [{Au₂(μ‐SH)(PH₂O)(PH₂OH)}₂], [(CuNH₃Cl)₂], and [{Cu(NH₃)Cl}₄] at the Hartree–Fock (HF) and second‐order Møller–Plesset (MP2) levels. The two interactions are found to be comparable and prevailing in the final structure. It is determined that the aurophilic contact has a same magnitude that the hydrogen bonding, and is stronger than the cuprophilic interaction. The presence of hydrogen bond directs the growth of the crystal. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Stereochimie de l'hydrogenation des (±) Δ3(3a)-hydrindenones-4. Comparaison avec le cas de la (+) methyl-3 Δ3(3a)-hydrindenone-4 et de ses dioxolannes

We show that the four studied 4-hydrindenones (with or without a methyl substituant at C3 or C7a) give by hydrogenation on Raney nickel or on Pd/C, in various solvants, the cis 4-hydrindanones, by a kinetically controlled process. During the hydrogenation, the double bond can migrate only in the positions conjugated to the carbonyl group.In contrast, when the carbonyle is protected as a dioxolanne, the double bond is free to migrate around the five membered ring. In spite of this mobility the optical purity of the saturated dioxolannes formed is high. In the case of the (+)3-methyl Δ^3(3a) 4-hydrindenone, the enantiomeric hydrindanones $\text{9a}$ obtained by direct hydrogenation or with isomerization of the double bond are not the same. Therefore, the optical purity of the product is low, but its value allows an estimation of the relative importance of the two reaction pathways.     

Chalcogenide derivatives of imidotin cage complexes

Reaction of the secocubane [Sn3(mu2-NHtBu)2(mu2-NtBu)(mu3-NtBu)] (1) with dibutylmagnesium produces the heterobimetallic cubane [Sn3Mg(mu3-NtBu)4] (4) which forms the monochalcogenide complexes of general formula [ESn3Mg(mu3-NtBu)4] (5a, E = Se; 5b, E = Te) upon reaction with elemental chalcogens in THF. By contrast, the reaction of the anionic lithiated cubane [Sn3Li(mu3-NtBu)4]- with the appropriate quantity of selenium or tellurium leads to the sequential chalcogenation of each of the three Sn(II) centres. Pure samples of the mono- or dichalcogenides are, however, best obtained by stoichiometric redistribution reactions of [Sn3Li(mu3-NtBu)4]- and the trichalcogenides [E3Sn3Li(mu3-NtBu)4]- (E = Se, Te). These reactions are conveniently monitored by using 119Sn NMR spectroscopy. The anion [Sn3Li(mu3-NtBu)4]- also acts as an effective chalcogen-transfer reagent in reactions of selenium with the neutral cubane [{Snmu3-N(dipp)}4] (8) (dipp = 2,6-diisopropylphenyl) to give the dimer [(thf)Sn{mu-N(dipp)}2Sn(mu-Se)2Sn{mu-N(dipp)}2Sn(thf)] (9), a transformation that results in cleavage of the Sn4N4 cubane into four-membered Sn2N2 rings. The X-ray structures of 4, 5a, 5b, [Sn3Li(thf)(mu3-NtBu)4(mu3-Se)(mu2-Li)(thf)]2 (6a), [TeSn3Li(mu3-NtBu)4][Li(thf)4] (6b), [Te2Sn3Li(mu3-NtBu)4][Li([12]crown-4)2] (7b') and 9 are presented. The fluxional behaviour of cubic imidotin chalcogenides and the correlation between NMR coupling constants and tin-chalcogen bond lengths are also discussed.