Simple and rapid micellar electrokinetic capillary chromatographic method for simultaneous determination of four antiepileptics in human serum

A very rapid and simple MEKC method was developed for the simultaneous determination of four antiepileptic drugs, ethosuximide (Etho), primidone (Pri), phenytoin (Pht) and carbamazepine (Cbz) in human serum. Sample analysis required only 100 microL of human serum which only needed to be centrifuged, decanted and combined with the running buffer [5.3 mM Na(2)HPO(4)/3.2 mM borax buffer (pH 9.5) containing 55 mM SDS and 3.5% (v/v) acetone]. The analysis was performed in only 10 min into fused-silica capillaries (57 cm total length with 50 microm i.d. and 50 cm to the detector) using the MEKC methodology with diode-array detection at 220 nm. The calibration graphs were established for ethoximide, primidone, phenytoin and carbamazepine between 0 and 20 mg/L. Recoveries were between 85 and 87%. The simplicity of the proposed methodology makes it suitable for routine clinical use, especially for epileptic patients on polytherapy.     

Derivative spectrophotometric resolution of mixtures of the food colourants Tartrazine, Amaranth and Curcumin in a micellar medium

A study of the absorption spectra of the food colourants Tartrazine (E-102), Amaranth (E-123) and Curcumin (E-100) in various organic solvents and pH media, have been carried out. In addition, the spectral behaviour in aqueous micellar systems of anionic, cationic and non-ionic surfactants, as well as beta-cyclodextrin, was investigated. Analytical methods are proposed for the determination of the three dyes in mixtures without any prior separation step, by the application of the derivative technique to the normal absorption spectra, based on the use of cetyltrimethylammonium bromide (CTAB) in 0.1 M NaOH, over the concentration range 2-50 mug ml(-1). The methods are applied for determining the three dyes in commercial food products.     

Micellar-stabilized room-temperature phosphorimetric determination of the fungicide thiabendazole in canned pineapple samples

A method for the determination of the fungicide thiabendazole (TBZ) by micellar-stabilized room-temperature phosphorescence is described. It does not require any separation step and allows the direct determination of the fungicide in canned pineapple samples. The effect of various experimental conditions is discussed in detail. The analytical curve of thiabendazole gives a linear dynamic range of 23.8–500.0 ng mL^–1 and a detection limit of 23.8 ng mL^–1. Recoveries of 103.9 and 89.2% for syrup and canned pineapple pulp, respectively, were obtained for 250 ng mL^–1 thiabendazole.     

A Kinetic Spectrophotometric Method to Determine the Insecticide Methyl Parathion in Commercial Formulations and the Aqueous Environment

Abstract

A simple kinetic-spectrophotometric method for the analysis of the organophosphate insecticide methyl parathien is presented. The method is based on the alkaline hydrolysis of the insecticide into its main metabolite p-nitrophenol. The influence of reaction variables (pH and temperature), and the effect of other pesticides, are discussed. The calibration graphs (initial rate, fixed time, fixed absorbance) were linear from 2 to 30μg/ml. The precision was calculated for the different methods applied, the relative standard deviation being 6.25% for 4μg/ml.

The proposed kinetic method can be applied directly to synthetic mixtures, commercial formulations and different aqueous environment, with recoveries close to 100%.     

Multiresidue analysis of quinolones in water by ultra‐high perfomance liquid chromatography with tandem mass spectrometry using a simple and effective sample treatment

A rapid and simple analytical method has been developed for the determination of 19 quinolones in environmental water samples using ultra high performance liquid chromatography with tandem mass spectrometry. Chromatographic and detection conditions have been optimized and the separation was achieved in less than 4 min. The separation was carried out using a new‐generation column filled with superficially porous particles, resulting in lower backpressure and better resolution than totally porous particle columns. The quinolones were detected by electrospray ionization in positive mode using multiple‐reaction monitoring mode for acquisition. A sample treatment based on liquid–liquid extraction and phase separation via salting‐out was employed to achieve a fast and simple extraction that enables the multiresidue analysis. The method has been validated for an environmental well water sample from a mountain area. Very low limits of detection (between 10 and 90 ng/L) with relative standard deviations lower than 16.5% and recoveries higher than 73% were achieved. Moreover, well waters from different origins (mountain and coast areas and irrigated land) have been evaluated and similar results were obtained.     

Laser induced fluorescence coupled to capillary electrophoresis for the determination of fluoroquinolones in foods of animal origin using molecularly imprinted polymers

A method for the simultaneous determination of four fluoroquinolones of veterinary use (ciprofloxacin, danofloxacin, enrofloxacin and sarafloxacin) in two complex matrixes, such as bovine raw milk and pig kidney, has been established and validated. The method is based on the use of capillary electrophoresis (CE) coupled with a very sensitive detection mode, such as laser induced fluorescence (LIF) detection, due to the fact the all the compounds selected show native fluorescence. In order to achieve high selectivity in the sample treatment procedure, a commercially available molecularly imprinted polymer has been used for the solid phase extraction of the analytes. Once the retention and elution processes were optimized, the final extract was analyzed by CE-LIF using a 325 nm He–Cd laser. Optimum separation was obtained in a 70 cm × 75 μm capillary using a 125 mM phosphoric acid solution at pH 2.8 with 36% methanol as background electrolyte. The method provided very low detection limits, ranging from 0.17 to 0.98 μg/kg for milk and 1.10 to 10.5 μg/kg for kidney, with acceptable precision and satisfactory recoveries.     

Separation of lanthanum,cerium and samarium from uranium samples

The radiation reduction yield of Fe³⁺ in complexes with various ligands (Cl^–, SO ₄ ^2– , CN^–) in methanol-water solutions has been studied. The effect of the dose, pH, scavenger concentration and matrix composition on the reduction, yield of Fe³⁺ in the above complexes and in Fe(acac)₃ was determined. Studies of methanol-water glasses (91) provided some interesting observations as to the effectiveness of scavenging the electrons by various ferric compounds. The effectiveness of scavenging decreases in the series Cl^–>SO ₄ ^2– >CN^–. As opposed to Co(acac)₃, Fe(acac)₃ appeared to be an ineffective scavenger.     

Determination of the insecticide promecarb by fluorogenic labelling with dansyl chloride.

The use of spectrofluorimetry to determine the fluorescent derivative of the insecticide promecarb, following hydrolysis to the corresponding phenol in basic media and subsequent coupling with the labelling agent dansyl chloride, is described and discussed. A study of media of different basicity and of different temperatures for both reactions gave optimum conditions of 20 min for the hydrolysis reaction and 10 min for the labelling reaction at 55 degrees C in 0.05 mol dm-3 sodium hydrogen carbonate solution with a reagent to insecticide ratio of 12:1. The effect of the solvent on the formation of the dansyl derivative and on the extraction process was studied using nine and seven solvents, respectively. The use of a mixture of acetone and water (50 + 50, v/v) and an extraction into cyclohexane gave the best results. The minimum detectable concentration of promecarb in the experimental assays was 100 ng ml-1. The error and relative standard deviation at a concentration level of 0.6 micrograms ml-1 were 9.7 and 10.9%, respectively. Air samples containing promecarb at different concentration levels were analysed.     

Three-dimensional synchronous fluorimetric determination of indole-type auxins after derivatization with o-phthalaldehyde

A sensitive fluorimetric method for teh determination of indole-derivative plant-growth regulators of the auxin group (indole-3-acetic acid, indole-3-butyric acid and indole-3-propanoic acid) is based on their eaction with o-phthaladehyde in concentrated sulphuric acid. The fluorescence spectra of the three derivatives are very similar, but the advantages offered by a three-dimensional plot of the spectra, the synchronous derivative approach and the optimization of experimental variables permit the individual and simultaneous quantitation of mixtures of these compounds at the ng ml^-1 level.     

Micellar-stabilized room-temperature phosphorimetric determination of the fungicide thiabendazole in canned pineapple samples

A method for the determination of the fungicide thiabendazole (TBZ) by micellar-stabilized room-temperature phosphorescence is described. It does not require any separation step and allows the direct determination of the fungicide in canned pineapple samples. The effect of various experimental conditions is discussed in detail. The analytical curve of thiabendazole gives a linear dynamic range of 23.8–500.0 ng mL^–1 and a detection limit of 23.8 ng mL^–1. Recoveries of 103.9 and 89.2% for syrup and canned pineapple pulp, respectively, were obtained for 250 ng mL^–1 thiabendazole. Received: 30 April 1997 / Revised: 18 July 1997 / Accepted: 23 July 1997