Low-threshold interband cascade lasers operating above room temperature

Mid-IR type-II interband cascade lasers were demonstrated in pulsed mode at temperatures up to 325 K and in continuous mode up to 200 K. At 80 K, the threshold current density was 8.9 A/cm² and a continuous wave output power of 140 mW/facet was obtained.     

Diffusion NMR methods applied to xenon gas for materials study

We report initial NMR studies of (i) xenon gas diffusion in model heterogeneous porous media and (ii) continuous flow laser-polarized xenon gas. Both areas utilize the pulsed gradient spin-echo (PGSE) techniques in the gas phase, with the aim of obtaining more sophisticated information than just translational self-diffusion coefficients--a brief overview of this area is provided in the Introduction. The heterogeneous or multiple-length scale model porous media consisted of random packs of mixed glass beads of two different sizes. We focus on observing the approach of the time-dependent gas diffusion coefficient, D(t) (an indicator of mean squared displacement), to the long-time asymptote, with the aim of understanding the long-length scale structural information that may be derived from a heterogeneous porous system. We find that D(t) of imbibed xenon gas at short diffusion times is similar for the mixed bead pack and a pack of the smaller sized beads alone, hence reflecting the pore surface area to volume ratio of the smaller bead sample. The approach of D(t) to the long-time limit follows that of a pack of the larger sized beads alone, although the limiting D(t) for the mixed bead pack is lower, reflecting the lower porosity of the sample compared to that of a pack of mono-sized glass beads. The Pade approximation is used to interpolate D(t) data between the short- and long-time limits. Initial studies of continuous flow laser-polarized xenon gas demonstrate velocity-sensitive imaging of much higher flows than can generally be obtained with liquids (20-200 mm s-1). Gas velocity imaging is, however, found to be limited to a resolution of about 1 mm s-1 owing to the high diffusivity of gases compared with liquids. We also present the first gas-phase NMR scattering, or diffusive-diffraction, data, namely flow-enhanced structural features in the echo attenuation data from laser-polarized xenon flowing through a 2 mm glass bead pack.     

Heterogeneous or homogeneous catalysis? Mechanistic studies of the rhodium-catalyzed dehydrocoupling of amine-borane and phosphine-borane adducts

In depth, comparative studies on the catalytic dehydrocoupling of the amine-borane adduct Me(2)NH.BH(3) (to form [Me(2)N-BH(2)](2)) and the phosphine-borane adduct Ph(2)PH.BH(3) (to form Ph(2)PH-BH(2)-PPh(2)-BH(3)) with a variety of Rh (pre)catalysts such as [[Rh(1,5-cod)(micro-Cl)](2)], Rh/Al(2)O(3), Rh(colloid)/[Oct(4)N]Cl, and [Rh(1,5-cod)(2)]OTf have been performed in order to determine whether the dehydrocoupling proceeds by a homogeneous or heterogeneous mechanism. The results obtained suggest that the catalytic dehydrocoupling of Me(2)NH.BH(3) is heterogeneous in nature involving Rh(0) colloids, while that of Ph(2)PH.BH(3) proceeds by a homogeneous mechanism even when starting with Rh(0) precursors such as Rh/Al(2)O(3). The catalytic dehydrocoupling reactions are thought to proceed by different mechanisms due to a combination of factors such as (i) the greater reducing strength of amine-borane adducts, (ii) the increased ease of dissociation of phosphine-borane adducts, and (iii) phosphine ligation and/or poisoning of active catalytic sites on metal colloids.     

The effect of vicinyl olefinic halogens on cross-coupling reactions using Pd(0) catalysis

(trans) 1-Chloro-2-iodoethylene (3), (trans) 1-bromo-2-iodoethylene (4), (trans) 1,2-diiodoethylene (5) and (cis and trans) 1,2-dibromoethylene (11) were reacted under Suzuki, Sonogashira and Negishi cross-coupling conditions using Pd catalysis to obtain mono coupled products. Only olefin template 3 provided the desired coupling products reliably under all reaction conditions. Compound 5 did not provide cross coupled products under any of the reaction conditions used. The Negishi reaction was the only one that worked for templates 4 and 11. Studies indicate that oxidative addition of the most reactive carbon-halogen bond to Pd(0) is followed by elimination of the second halide, when the second halide is a bromide or an iodide. This happens to a much lesser degree when the second halogen is a chloride.     

A solid-state 39K and 13C NMR study of polymeric potassium metallocenes

The quadrupolar Carr-Purcell Meiboom-Gill (QCPMG) and double frequency sweep (DFS)/QCPMG pulse sequences are applied in order to acquire the first solid-state 39K NMR spectra of organometallic complexes, the polymeric main group metallocenes cyclopentadienyl potassium (CpK) and pentamethylcyclopentadienyl potassium (Cp*K). Piecewise QCPMG NMR techniques are used to acquire a high S/N 39K spectrum of the broad central transition of Cp*K, which is ca. 200 kHz in breadth. Analytical and numerical simulations indicate that there is a significant quadrupolar interaction present at both potassium nuclei (C(Q)(39K) = 2.55(6)/2.67(8) MHz and 4.69(8) MHz for CpK (static/MAS) and Cp*K, respectively). Experimental quadrupolar asymmetry parameters suggest that both structures are bent about the potassium atoms (eta(Q)(39K) = 0.28(3)/0.29(3) for CpK (static/MAS) and eta(Q)(39K) = 0.30(3) for Cp*K). Variable-temperature (VT) 39K NMR experiments on CpK elucidate temperature-dependent changes in quadrupolar parameters which can be rationalized in terms of alterations of bond distances and angles with temperature. 13C CP/MAS NMR experiments are conducted upon both samples to quantify the carbon chemical shielding anisotropy (CSA) at the Cp' ring carbon atoms. Ab initio carbon CSA and 39K electric-field gradient (EFG) and CSA calculations are conducted and discussed for the CpK complex, in order to correlate the experimental NMR parameters with molecular structure in CpK and Cp*K. 39K DFS/QCPMG and 13C CP/MAS experiments prove invaluable for probing molecular structure, temperature-dependent structural changes, and the presence of impurities in these systems.     

Noria: A Highly Xe‐Selective Nanoporous Organic Solid

Separation of xenon and krypton is of industrial and environmental concern; the existing technologies use cryogenic distillation. Thus, a cost‐effective, alternative technology for the separation of Xe and Kr and their capture from air is of significant importance. Herein, we report the selective Xe uptake in a crystalline porous organic oligomeric molecule, noria, and its structural analogue, PgC‐noria, under ambient conditions. The selectivity of noria towards Xe arises from its tailored pore size and small cavities, which allows a directed non‐bonding interaction of Xe atoms with a large number of carbon atoms of the noria molecular wheel in a confined space.     

Single-Shot Diffusion Measurement in Laser-Polarized Gas

A single-shot pulsed gradient stimulated echo sequence is introduced to address the challenges of diffusion measurements of laser polarized 3He and 129Xe gas. Laser polarization enhances the NMR sensitivity of these noble gases by >10(3), but creates an unstable, nonthermal polarization that is not readily renewable. A new method is presented which permits parallel acquisition of the several measurements required to determine a diffusive attenuation curve. The NMR characterization of a sample's diffusion behavior can be accomplished in a single measurement, using only a single polarization step. As a demonstration, the diffusion coefficient of a sample of laser-polarized 129Xe gas is measured via this method.     

Sodium halides as the source of electrophilic halogens in green synthesis of 3-halo- and 3,n-dihalobenzo[b]thiophenes

A convenient methodology for the synthesis of mono- and di-halogenated benzo[b]thiophenes is described herein, which utilizes copper(II) sulfate pentahydrate and various sodium halides in the presence of substituted 2-alkynylthioanisoles. The proposed method is facile, uses ethanol as a green solvent, and results in uniquely substituted benzo[b]thiophene structures with isolated yields up to 96%. The most useful component of this methodology is the selective introduction of bromine atoms at every available position (2–7) around the benzo[b]thiophene ring, while keeping position 3 occupied by a specific halogen atom such as Cl, Br or I. Aromatic halogens are useful reactive handles; therefore, the selective introduction of halogens at specific positions would be valuable in the targeted synthesis of bioactive molecules and complex organic materials via metal-catalyzed cross coupling reactions. This work is a novel approach towards the synthesis of dihalo substituted benzo[b]thiophene core structures, which provides a superior alternative to the current methods discussed herein.