Synthesis,characterization, and cytotoxicity evaluation of high-magnetization multifunctional nanoclusters

The paper presents the synthesis, characterization, and in vitro cytotoxicity tests of Fe₃O₄ magnetic nanoclusters coated with ethylenediaminetetraacetic acid disodium salt (EDTA). Electron microscopy analysis (SEM) evidences that magnetite nanoparticles are closely packed into the clusters stabilized with EDTA with well-defined near spherical shapes and sizes in the range 100–200 nm. From XRD measurements, we determined the mean size of the crystallites inside the magnetic cluster about 36 nm. The saturation magnetization determined for the magnetic clusters stabilized with EDTA has high value, about 81.7 emu/g at 300 K. X-ray photoelectron spectroscopy has been used to determine both the elemental and chemical structure of the magnetic cluster surface. In vitro studies have shown that the magnetic clusters at low doses did not induce toxicity on human umbilical vein endothelial cells or lesions of the cell membrane. In contrast, at high doses, the magnetic clusters increased the lipid peroxidation and reduced the leakage of a cytoplasmic enzyme, lactate dehydrogenase (LDH), in parallel with increasing the antioxidant defense.

Open image in new window

Graphical abstract SEM images of EDTA-coated magnetic clusters (MCs) and the HUVEC viability at different MC doses

     

Surface Analysis of Inhibitor Film Formed by 4-Amino-N-(1,3-thiazol-2-yl) Benzene Sulfonamide on Carbon Steel Surface in Acidic Media

Inhibitive properties of the antibacterial sulfa drug sulfathiazole—IUPAC name being 4-amino-N-(1,3-thiazol-2-yl) benzene sulfonamide—on the corrosion of carbon steel in 1.0 M HCl solution were investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Sulfathiazole is a good adsorption inhibitor, and the inhibition efficiency increases with increasing concentration. Adsorption is spontaneous and is best described by Temkin isotherm. XPS analysis showed, at this stage, that the main product of corrosion is a nonstoichiometric Fe³⁺ oxide/oxyhydroxide consisting of a mixture of Fe₂O₃, α, and γ-FeO(OH) and/or Fe(OH)₃, where α, γ-FeO(OH) is the main phase.     

Morpho-structural and luminescence investigations on yttrium silicate based phosphors prepared with different precipitating agents

Yttrium silicate doped with cerium (Y₂SiO₅:Ce) was obtained from Y-Ce-Si based precursors prepared by the simultaneous addition of reagents (SimAdd) technique. The synthesis of the precursors was done in well controlled conditions using ammonium oxalate, ammonium carbonate or urea as precipitating agents. Results regarding the influence of precipitating agents on the morpho structural and photoluminescent characteristics of Y₂SiO₅:Ce are reported. The TG analysis in correlation with EGA, FT-IR and XRD investigations reveals the formation of oxalate, hydroxy-carbonate or hydroxy-nitrate based compounds, the same as the conversion of the precursors to well crystallized yttrium silicate. XRD patterns show that the precursors are amorphous except for the sample prepared with ammonium oxalate. Depending on the precipitation conditions, the phosphors phase composition varies from single phase (X2-Y₂SiO₅) to a mixture of phases (X2-Y₂SiO₅, X1-Y₂SiO₅, Y₂O₃). Under UV excitation, phosphors exhibit the specific blue emission of cerium with an intensity that varies from 175.8% (urea) to 96.0% (ammonium carbonate) and to 78.5% (ammonium oxalate). The emission intensity depends on the phase purity and order degree of the phosphors. PACS Classification codes:78.55 Hx, 81.20Fw      

Pattern Recognition of Sweeteners in Biological Fluids,Beverages, and Ketchup using Stochastic Sensors

Three stochastic sensors based on nanodiamond (nDP) paste modified with α, β, and γ‐cyclodextrin were designed and characterized for pattern recognition of aspartame, acesulfame K and sodium cyclamate in beverages, ketchup, and biological fluids. The linear concentration ranges obtained for acesulfame K (between 1.00×10^?10 mol L^?1and 1.00×10^?3 mol L^?1), for aspartame (between 1.00×10^?12 mol L^?1 and 1.00×10^?3 mol L^?1) and for sodium cyclamate (between 4.97×10^?12 mol L^?1 and 4.97×10^?3 mol L^?1) allow their assay in biological fluids, beverages and ketchup. The lowest limits of quantification were obtained using the stochastic sensor based on γ‐CD/nDP: for acesulfame K 1.00×10^?10 mol L^?1, for aspartame 1.00×10^?12 mol L^?1 and for sodium cyclamate 4.97×10^?12 mol L^?1. All three stochastic sensors revealed very high values of sensitivities. The proposed method was reliable for qualitative and quantitative assay of aspartame, acesulfame K and sodium cyclamate in beverages, ketchup, and in biological fluids such as urine.     

Emulsion polymerization of vinyl chloride,potassium persulfate decomposition

Decomposition of potassium persulfate in sodium dodecyl sulfate solutions (of concentrations under and above CMC) and in the presence of poly(vinyl chloride) and vinyl chloride was studied. The decomposition rate has a maximum close to the CMC value of the final solutions. On the basis of experimental data a hemolytic mechanism in which a radical derived from dodecyl sulfate participates is proposed.     

Synthesis of New Phenolic Derivatives of Quinazolin-4(3H)-One as Potential Antioxidant Agents—In Vitro Evaluation and Quantum Studies

Considering the important damage caused by the reactive oxygen (ROS) and nitrogen (RNS) species in the human organism, the need for new therapeutic agents, with superior efficacy to the known natural and synthetic antioxidants, is crucial. Quinazolin-4-ones are known for their wide range of biological activities, and phenolic compounds display an important antioxidant effect. Linking the two active pharmacophores may lead to an increase of the antioxidant activity. Therefore, we synthesized four series of new hybrid molecules bearing the quinazolin-4-one and phenol scaffolds. Their antioxidant potential was evaluated in vitro, considering different possible mechanisms of action: hydrogen atom transfer, ability to donate electrons and metal ions chelation. Theoretical quantum and thermodynamical calculations were also performed. Some compounds, especially the ortho diphenolic ones, exerted a stronger antioxidant effect than ascorbic acid and Trolox.     

Synthesis of High χ–Low N Diblock Copolymers by Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) enables the scalable synthesis of functional block copolymer nanoparticles with various morphologies. Herein we exploit this versatile technique to produce so-called “high χ–low N” diblock copolymers that undergo nanoscale phase separation in the solid state to produce sub-10 nm surface features. By varying the degree of polymerization of the stabilizer and core-forming blocks, PISA provides rapid access to a wide range of diblock copolymers, and enables fundamental thermodynamic parameters to be determined. In addition, the pre-organization of copolymer chains within sterically-stabilized nanoparticles that occurs during PISA leads to enhanced phase separation relative to that achieved using solution-cast molecularly-dissolved copolymer chains.     

Family constraining of iterative algorithms

In constraining iterative processes, the algorithmic operator of the iterative process is pre-multiplied by a constraining operator at each iterative step. This enables the constrained algorithm, besides solving the original problem, also to find a solution that incorporates some prior knowledge about the solution. This approach has been useful in image restoration and other image processing situations when a single constraining operator was used. In the field of image reconstruction from projections a priori information about the original image, such as smoothness or that it belongs to a certain closed convex set, may be used to improve the reconstruction quality. We study here constraining of iterative processes by a family of operators rather than by a single operator.     

Polyphenols from Dichrostachys cinerea Fruits Anti-Inflammatory,Analgesic, and Antioxidant Capacity in Freund’s Adjuvant-Induced Arthritic Rat Model

Dichrostachys cinerea (L.) Wigth & Arn. (DC) is widely used in traditional medicine against several inflammatory diseases, especially rheumatoid arthritis, because of its antioxidant and anti-inflammatory effects. This study aimed to characterize the polyphenol-rich DC fruit extracts and investigate the analgesic, anti-inflammatory, and antioxidant effects in a rat inflammation model induced by complete Freund’s adjuvant (CFA). Water and ethanolic extracts were characterized using liquid chromatography coupled with mass spectrometry (LC-MS), Fourier-transform infrared (FTIR) spectroscopy, and gas chromatography coupled with mass spectrometry (GC-MS). The polyphenol-rich extracts were administered in three different concentrations for 30 days. Pain threshold, thermal hyperalgesia, edema, and serum biomarkers specific to inflammatory processes or oxidative stress were evaluated. Both extracts were rich in polyphenolic compounds, mainly flavan-3-ols, proanthocyanidins, and flavone glycosides, which had important in vitro antioxidant capacity. DC fruit extracts administration had the maximum antinociceptive and anti-inflammatory effects after one day since the CFA injection and showed promising results for long-term use as well. The measurement of pro-inflammatory cytokines, cortisol, and oxidative stress parameters showed that DC extracts significantly reduced these parameters, being dose and extract-type dependent. These results showed potential anti-inflammatory, analgesic, and antioxidative properties and revealed the necessity of using a standardized polyphenolic DC extract to avoid result variability.