Synthesis and spectroscopic properties of a new bipyridine-bipyrazoyl(pyridine)-thiocyanato-ruthenium(II) complex

The complex [Ru(II)(dcbpyH₂)(bdmpp)NCS](PF₆) (1) (where dcbpyH₂ is 2,2′-bipyridine-4,4′-dicarboxylic acid, bdmpp is 2,6-bis(3,5-dimethyl-N-pyrazoyl)pyridine,) is synthesized and characterized extensively by ¹H NMR and ¹³C NMR 1D and 2D, mass spectroscopy, cyclic voltammetry, electronic absorption spectroscopy and IR. The half-wave potential of the Ru(II)/Ru(III) redox couple was measured at E_1/2=+0.795 V versus Ag/AgCl in CH₃CN. The complex presents three intense metal-to-ligand charge transfer (MLCT) (d_M→π_L*) absorption bands centered at 383 (=21 300 M⁻¹ cm⁻¹), 432 (=22 400 M⁻¹ cm⁻¹) and 475 nm (=23 400 M⁻¹ cm⁻¹), respectively. The absorbance is extremely strong between 400 and 500 nm and even at 620 nm, the extinction coefficient is still high (=3768 M⁻¹ cm⁻¹). The strong π-acceptor property of the trans-isothiocyanate ligand compared with the Cl⁻ ligand is probably the cause of the blue-shift observed in complex 1. These properties make the complex potentially promising for the photosensitization process. The incorporation of TiO₂ photoelectrodes derivatized with this complex into a solar cell using a composite polymer/inorganic oxide solid-state electrolyte confirmed its sensitizing ability. Incident monochromatic photon-to-current conversion efficiency (IPCE) values of about 30% and overall energy conversion efficiency (η) of 1.7% were obtained.     

微乳液的热力学性质 I: 芳烃类的侧链链长对微乳液热力学函数影响

本文研究以非离子型表面活性剂-正辛醇-水-芳烃类所组成的微乳液, 探讨醇从油相转移到界面相时的自由能变化, 以及温度对自由能的影响。计算出熵和焓的变化, 发现在实验范围内, 上述热力学函数的对数值与芳烃侧链的碳原子数(n)呈线性关系。这些关系式对微乳液的构成和稳定性的讨论是重要的, 还对几种芳烃异构体所构成的微乳液的热力学函数进行了实验和讨论。     

Single-frequency, single-mode, plane-polarized ytterbium-doped fiber master oscillator power amplifier source with 264 W of output power

We present a single-frequency, single-mode, plane-polarized ytterbium-doped all-fiber master oscillator power amplifier source at 1060 nm generating 264 W of continuous-wave output power. The final-stage amplifier operated with a high gain of 19 dB and a high conversion efficiency of 68%. There was no evidence of rollover from stimulated Brillouin scattering even at the highest output power, and the maximum output was limited only by the available pump power.     

Al2O3 thin films by plasma-enhanced chemical vapour deposition using trimethyl-amine alane (TMAA) as the Al precursor

2 O₃ thin films by plasma-enhanced chemical vapour deposition (PECVD) using trimethyl-amine alane (TMAA) as the Al precursor. The thin films were deposited on both Si and quartz silica (SiO₂) substrates. Deposition rates were typically 60 Å min^-1 keeping the TMAA temperature constant at 45 °C. The deposited Al₂O₃ thin films were stoichiometric alumina with low carbon contamination (0.7–1.3 At%). The refractive index ranged from 1.54 to 1.62 depending on the deposition conditions. The deposition rate was studied as a function of both the RF power and the substrate temperature. The structure and the surface of the deposited Al₂O₃ thin films were studied using X-ray diffraction, atomic force microscopy (AFM) and scanning electron microscopy (SEM). Received: 20 May 1997/Accepted: 12 June 1997     

抗坏血酸和尿酸在甘氨酸-壳聚糖修饰玻碳电极上的电化学行为及测定

制备了甘氨酸-壳聚糖复合膜修饰玻碳电极(Gly-CTS/GCE),研究了抗坏血酸(AA)和尿酸(UA)在该修饰电极上的电化学行为。结果表明在pH=5.59的磷酸盐缓冲溶液中,AA、UA在Gly-CTS/GCE上均产生灵敏的不可逆氧化峰,其峰电流与浓度在一定范围内呈良好的线性关系。对AA和UA混合溶液平行测定7次,相对标准偏差分别为4.6%、2.9%,表明该电极重现性和稳定性良好。AA、UA在Gly-CTS/GCE电极上的氧化峰峰电位相差340mV,据此可实现对二者的同时检测,并可应用于实际样品测定。     

C70X2(X=H,F, Cl)的稳定性和电子光谱

用INDO方法研究C70H2四种异构体的稳定性, 表明其最稳定异构体为1, 9-C70H2和7, 8-C70H2, 两者能量差为16.3KJ.mol^-^1, 与实验值及ab initio计算值接近; 光谱计算表明, 其特征吸收峰与实验值一致。在此基础上预测C70F2和C70Cl2的稳定性和电子光谱, 表明C70F2四种异构体的稳定性顺序与C70H2一致, 而C70Cl2则以21, 42-异构体最为稳定。二者的电子光谱与C70H2极其相似只是在500nm以上有细微差别。     

氢原子在镍台阶面上吸附、振动和表面扩散行为的理论研究

本文用对势方法研究了氢原子在Ni(510)台阶面上的吸附和振动, 计算结果与实验符合得很好。并考察了氢原子在Ni(997)台阶面上的吸附和扩散, 结果表明,台阶对下台面上扩散的氢原子开成捕获势阱, 对上台面扩散的氢原子形成反射势,这也很好地支持了实验结果。     

Improved Gain Characteristics in Er3+-Doped Alumina (Al2O3) Channel Optical Waveguide Amplifiers for WDM Systems

Er3+-doped Al2O3 optical waveguides are analyzed both as single amplifiers and as elements of a 16-channel wavelength division multiplexing transmission system; their performance is compared with that from Er3+-doped SiO2 optical waveguide amplifiers. The amplifier model, based on propagation and population-rate equa tions, includes both uniform and pair-induced up-conversion mechanisms and is solved numerically by combining finite elements and the Runge-Kutta algorithm. The analysis showed that Er3+-doped Al2O3 waveguides exhibit much higher signal gains than Er3+-doped SiO2 waveguides and also that the use of Er3+-doped Al2O3 waveguides reduces the deleterious gain peaking effect, increasing the maximum transmission distance.     

New oxorhenium(V) complexes from the widely used diaminedithiol (DADT) ligand system

Synthesis of the 2,9-dimethyl-4,7-diaza-4-alkyl-2,9-decanedithiol (1, alkyl = morpholinylethyl in a, and alkyl = pyrrolidinylethyl in b), following a widely used synthetic scheme for diaminedithiol (DADT) ligands, led to the isolation of 1-alkyl-2-(1'-methyl-1'-sulfanylethyl)-3-(2' '-methyl-2' '-sulfanylpropyl)diazolidine (3) as the major product. Both ligands 1 and 2 gave complexes with the oxorhenium ReO(V) core. Ligand 1 gave the expected ReO[SNNS] complex (2) with the side chain on nitrogen in the syn configuration. Ligand 3 gave, in the presence of a monodentate aromatic thiol, complexes of the ReO[SNN][S][S] (4) and ReO[SNN][S] type (5), respectively, in which the diazolidine ring has rearranged to a thiazolidine ring. Crystallographic analysis showed that in 4 the coordination geometry about the metal is distorted octahedral where the equatorial plane is defined by the sulfur and one of the nitrogen atoms of the ligand and the two sulfurs of the aromatic thiols, while the axial positions are occupied by the oxygen of the ReO core and the second nitrogen of the ligand. Specifically, complex 4a crystallizes in space group P2(1)/c, a = 15.63(1) A, b = 15.28(2) A, c = 16.07(1) A, beta = 113.78(2) degrees, V = 3512(5) A(3), Z = 4. Complex 4b crystallizes in space group P2(1)/n, a = 14.560(9) A, b = 14.804(9) A, c = 19.85(1) A, beta = 90.94(2) degrees, V = 4278(1) A(3), Z = 4. In 5b, the coordination geometry is distorted square pyramidal with the SNN donor atom of the ligand and the aromatic thiol defining the equatorial plane and the doubly bonded oxygen occupying the apex of the pyramid. Complex 5b crystallizes in space group P(-)1, a = 9.387(5) A, b = 11.306(5) A, c = 14.040(6) A, alpha = 84.51(1) degrees, beta = 84.45(2) degrees, gamma = 87.17(1) degrees, V = 1475(1) A(3), Z = 2. All isolated complexes are neutral and lipophilic. Complete assignments of (1)H and (13)C NMR resonances are reported.     

WDM Systems in the C-Band Using Er 3+ -Doped Tellurite Optical Waveguide Amplifiers

A 16-channel, 2.5 Gb/s, wavelength-division multiplexing system is analyzed with its channels allocated in the 1.52-1.56 w m wavelength region in order to increase the usable amplifier bandwidth to , 45 nm. To avoid amplified spontaneous emission (ASE) noise and the nonuniform signal gain in the wavelength region, an amplifier module consisting of an Er 3+ -doped tellurite waveguide amplifier, an ASE filter, and two concatenated long-period grating filters are proposed. A tellurite-based amplifier was chosen as the amplifying element because of its broad emission bandwidth (~80 nm), its high emission cross section (6.44 2 10 -25 m 2 ), and its high rare-earth ion solubility. The amplifier model is based on propagation and populationrate equations and includes both uniform and pair-induced up-conversion mechanisms. It is solved numerically by combining finite elements and a Runge-Kutta algorithm. The analysis predicts that using the proposed amplifier module, the channels may be transmitted to a maximum distance of 1800 km, finding applications in large optical networks where either many wavelengths are required or channel spacing must be large.