The effect of the counteranion on the formation of mesoporous materials under the acidic synthesis process

The presence of various counteranions at the interfacial region of the silicate-surfactant mesophase introduces opportunities for manipulation of the phase structure. Well-ordered 3D-hexagonal P63/mmc, cubic Pmn, 2D-hexagonal p6mm, and cubic Iad mesoporous materials have been synthesized with the same surfactant, cetyltriethylammonium bromide, in the presence of various acids. The counteranions of acidic media have resulted in increasing the surfactant packing parameter g in the order SO42- < Cl- < Br- < NO3-, which leads to the different time course of formation of mesostructures. The effect of counteranions on the formation of mesostructures is explained in terms of not only the adsorption strength on the headgroups of the surfactant micelle but also the rate of silica condensation affecting the charge density matching between the surfactant and silica. It has been found that the mesophase is always transformed from the larger g parameter into the smaller one. The distinct morphologies of the 3D-hexagonal P63/mmc mesophases have been rationally explained by supposing this particular mesostructure. The cubic Iad phase has been first synthesized under acidic conditions.     

Separation and control of the elution order of N-t-butyloxycarbonyl amino acids D/L isomers by reversed-phase HPLC using cyclodextrins as chiral selectors for the mobile phase.

The enantiomeric resolution of N-t-butyloxycarbonyl (N-t-Boc) amino acids D/L isomers by reversed-phase HPLC was investigated using cyclodextrins (CD's) as chiral selectors for the mobile phase. The use of a low pH (pH<4) for the mobile phase enabled the enantioseparation of N-t-Boc amino acids. The opposite elution order of D/L isomers was observed when hydroxypropyl-derivatized beta-CD was used instead of native beta-CD. A computer simulation of the enantioseparation showed that the ratio of the retention factors of the chiral selector and the sample determined the elution order and the resolution. When the retention factor of the chiral selector is smaller than that of the sample, an isomer having larger complex formation constant eluted faster. However, when the chiral selector had a larger retention factor than the sample, an opposite elution order of the isomers was obtained. The large difference in the retention factors between the chiral selector and the sample led to good enantiomeric separation.     

Mechanical Characterization Measurement of Polymer Material under Stress by Birefringence Microscope

Some polymer materials under tensile stress provide us interesting information. Internal structure changes of polymer materials must be observed by external stress. Birefringence shows the orientation characteristic in molecular orientation. A microscopic measurement system for birefringence distribution is proposed to analyze the relation between applied stress and birefringence distribution of an internal structure. Birefringence distributions of gelatin such as phase difference and azimuthal angle are shown in cases of loading and unloading stress as a demonstration. The phase difference increased nonlinearly with each process, and change of birefringence in the elastic domain was different from that in the plastic domain.     

Emission control by binary energy transfer processes on oligouridine

Fluorescent oligonucleotides have been designed on which two different energy transfer processes were mounted together: excitonic interaction and FRET. The fluorescence emission of the oligonucleotides was controlled well by the two different energy transfer processes, in response to their hybridization to the complementary RNA both in vitro and in cells.     

Structure-reactivity correlations in nucleophilic substitution reactions of Y-substituted phenyl X-substituted benzoates with anionic and neutral nucleophiles

A kinetic study is reported for the reactions of 4-nitrophenyl X-substituted benzoates (1a-1) and Y-substituted phenyl benzoates (2a-1) with two anionic nucleophiles (OH(-) and CN(-)) and three amines (piperidine, hydrazine, and glycylglycine) in 80 mol% H(2)O-20 mol% dimethyl sulfoxide (DMSO) at 25.0 +/- 0.1 degrees C. Each Hammett plot exhibits two intersecting straight lines for the reactions of 1a-1 with the anionic nucleophiles and piperidine, while the Yukawa-Tsuno plots for the same reactions are linear. The Hammett plots for the reactions of 2a-1 with hydrazine and glycylglycine demonstrate much better linear correlations with sigma(-) constants than with sigma degrees or sigma constants, indicating that the leaving group departure occurs at the rate determining step (RDS). On the contrary, sigma(-) constants result in poorer Hammett correlation than sigma degrees constants for the corresponding reactions with OH(-) and CN(-), indicating that the leaving group departure occurs after the RDS for the reactions with the anionic nucleophiles. The large rho(X) value (1.7 +/- 0.1) obtained for the reactions of 1a-1 with the anionic nucleophiles supports the proposal that the reactions proceed through an addition intermediate with its formation being the RDS.     

Molecular complex consisting of two typical external medicines: intermolecular interaction between indomethacin and lidocaine

The molecular complex formed between indomethacin (IDM) and lidocaine (LDC), which are typical external medicines, was studied. A thermal analysis, microscopic study and phase solubility technique suggested intermolecular interaction between IDM and LDC. The phase solubility profiles with IDM and LDC were classified as A(L)-type, indicating the formation of a 1 : 1 stoichiometric molecular complex. The apparent stability constant (K(S)), calculated from the slope and the intercept, was 4478.9 M(-1). A molecular ion peak was detected at 592.2 (m/z) from fast-atom bombardment-MS measurements, which was in accordance with the sum of the molecular weight for IDM (M(W): 357.81) and LDC (M(W): 234.38). The changes of IR spectra in the C=O stretching region showed that each intact hydrogen bond network was collapsed in the IDM-LDC system and strong interaction between IDM and LDC formed after their kneading. From the (1)H-NMR analyses, it was estimated that the dominant interactive site was the IDM carboxylic acid group which associated with the LDC diethyl amino group non-covalently.     

Aminolysis of Y-substituted phenyl X-substituted cinnamates and benzoates: effect of modification of the nonleaving group from benzoyl to cinnamoyl

A kinetic study is reported for reactions of Y-substituted phenyl X-substituted cinnamates (1a-e and 3a-g) and benzoates (2a-e and 4a-g) with a series of alicyclic secondary amines in 80 mol % H2O/20 mol % DMSO at 25.0 +/- 0.1 degrees C. Reactions of 2,4-dinitrophenyl X-substituted cinnamates (1a-e) and benzoates (2a-e) with amines result in linear Yukawa-Tsuno plots. The rho(X) values are much smaller for the reactions of 1a-e than for those of 2a-e. A distance effect and the nature of the reaction mechanism (i.e., a concerted mechanism for 1a-e) have been suggested to be responsible for the small rho(X) values. The Br?nsted-type plots for the reactions of 2,4-dinitrophenyl X-substituted cinnamates (1a, 1c, and 1e) with amines are curved with a decreasing betanuc value from 0.65 to 0.3-0.4. The reactions of Y-substituted phenyl cinnamates (3a-g) with morpholine also result in a curved Br?nsted plot, while the corresponding reactions of Y-substituted phenyl benzoates (4a-e) exhibit a linear Br?nsted plot. It has been concluded that the curved Br?nsted plots found for the reactions of the cinnamates (1a, 1c, 1e, and 3a-g) are not due to a change in the rate-determining step (RDS) but due to a normal Hammond effect for a concerted mechanism, that is, an earlier transition state (TS) for a more reactive amine or substrate.     

Resonance effect in solvolysis of 1-methylbenzyl chlorides

Substituent effects of p-MeO and p-MeS groups deactivated by additional m-substituents in cumyl and α-phenylethyl solvolyses were studied to provide evidence for the higher resonance demand in the α-phenylethyl system.     

Three-dimensional SiO2 surface structures fabricated using femtosecond laser lithography

We report the fabrication of three-dimensional (3-D) SiO₂ surfaces using femtosecond-laser lithography-assisted micromachining, which is a combined process of nonlinear lithography and plasma etching. Using pattern transfer of photoresist structures written by femtosecond laser-induced nonlinear absorption, SiO₂-based Fresnel lens arrays with 3-D surfaces were obtained for this study. Using the open-aperture z-scan method, the femtosecond laser two-photon absorption coefficient of the KMPR resist was estimated as 17–23 cm/TW, assuming that single-photon absorption was negligible. By adding O₂ to the etching gas (CHF₃) during pattern transfer, the surface roughness of the transferred structures was reduced to RMS 16.90 nm, which corresponds to one quarter of that without adding O₂. When 632.8-nm-wavelength light was coupled to the lenses with 3-D surfaces, the focal length was measured as 2790 μm, which agreed well with the theoretical value.