Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Simultaneous determination of lead(II) and cadmium(II) at a diacetyldioxime modified carbon paste electrode by differential pulse stripping voltammetry

A simple and effective chemically modified carbon paste electrode (CMCPE) for the simultaneous determination of lead(II) and cadmium(II) was developed in this work. The electrode was prepared by the addition of diacetyldioxime into a carbon paste mixture. Pb²⁺ and Cd²⁺ were preconcentrated on the surface of the modified electrode by complexing with diacetyldioxime and reduced at a negative potential (−1.10 V). Then the reduced products were oxidized by differential pulse stripping. The fact that two stripping peaks appeared on the voltammograms at the potentials of −0.65 V (Cd²⁺) and −0.91 V (Pb²⁺) demonstrates the possibility of simultaneous determination of Pb²⁺ and Cd²⁺. Under the optimized working conditions, calibration graphs were linear in the concentration ranges of 1.0×10⁻⁷-1.5×10⁻⁵ mol l⁻¹ (Pb²⁺) and 2.5×10⁻⁷-2.5×10⁻⁵ mol l⁻¹ (Cd²⁺), respectively. For 5 min preconcentration, detection limits of 1×10⁻⁸ mol l⁻¹ (Pb²⁺) and 4×10⁻⁸ mol l⁻¹ (Cd²⁺) were obtained at the signal noise ratio (SNR) of 3. To evaluate the reproducibility of the newly developed electrode, the measurements of 5×10⁻⁷ mol l⁻¹ Pb²⁺ and Cd²⁺ were parallel carried out for six times at different electrodes and the relative standard deviations were 2.9% (Pb²⁺) and 3.2% (Cd²⁺), respectively. Interferences by some metals were investigated. Only Ni²⁺ and Hg²⁺ apparently affected the peak currents of Pb²⁺ and Cd²⁺. The diacetyldioxime modified carbon paste electrode was applied to the determination of Pb²⁺ and Cd²⁺ in water samples. The results indicate that this electrode is sensitive and effective for the simultaneous determination of Pb²⁺ and Cd²⁺.     

Research on taper zone coupling from single-core fiber to annular-core hollow beam fiber

Optical Review - We designed and manufactured a novel annular-core hollow beam fiber which could directly yield ring light with a central dark spot inside the beam employing MCVD technique and a...     

一种宽能谱多球中子谱仪能量响应的MC模拟

利用蒙特卡罗程序FLUKA模拟计算了聚乙烯慢化球和辅助材料慢化球对低能中子到高能中子的响应函数曲线。结果表明,对纯聚乙烯球来说,随着聚乙烯层厚度的增加,响应曲线峰逐步右移,峰值在高能区有所下降,对20 Me V以上的中子,无论纯聚乙烯球的尺寸有多大,其响应均下降到很低的程度;对辅助材料慢化球来说,中子能量小于1 Me V时,辅助材料慢化球与聚乙烯慢化球的响应曲线相似,但当中子能量大于20 Me V时,中子与辅助材料层发生(n,xn)反应,慢化球的响应呈显著上升趋势。分析计算结果,最终能够确定宽能谱多球中子谱仪的尺寸组合。     

Effects of internals and distributors on the distribution and growth of bubbles in the conventional gas-solid fluidized bed

The effects of internals and gas distributors on the local dynamics of the bubbles in the conventional gas-solid fluidized bed were studied.Mesh-type internals with different opening areas(50%,70%and 90%)and different arrangements(two-layer and four-layer);and a sintered plate with a smaller pore size(1μm)and a perforated plate with a larger pore size as distributors were investigated.Differential pressure drops and local solids holdups were measured under various superficial gas velocities to compare the performances of the different types of internals and distributors.The instantaneous solids holdup signals from the optical fibre probe were used to further examine the local bubble dynamics in detail.Smaller bubbles were found,with the installation of internals or using the sintered plate,resulting in lower pressure drops and a higher bed expansion.Internals with reduced opening area or distributor with smaller pore size further leads to a higher changeover rate between the bubbles and dense phase,both axially and radially,and hence a better gas-solid contacting and an earlier transition to the turbulent flow regime of the bed.     

Electrochemical characterization of cationic surfactants’ adsorption on a disturbed n-alkanethiolate self-assembled monolayer-modified polycrystalline gold electrode

The adsorption of cetyltrimethylammonium bromide (CTAB) on disturbed n-alkanethiolate self-assembled monolayers (SAMs) was investigated by electrochemical methods with potassium ferricyanide [K₃Fe(CN)₆] as a probe. Compared with the completely restrained signal at ordinary compact n-alkanethiolate SAMs, the electrochemical response of K₃Fe(CN)₆ at the disturbed n-alkanethiolate SAMs was partly restored and became progressively reversible in the presence of increasing concentrations of CTAB, which was employed to characterize the adsorption of cationic surfactants on hydrophobic SAMs. The effect of CTAB concentration on electrochemical impedance spectroscopy (EIS) plots indicated that CTAB experienced two different types of adsorptive behavior at the disturbed n-alkanethiolate SAMs: monomer adsorption at low concentrations below 1×10^–6 M and monolayer adsorption at CTAB concentrations above 1×10^–5 M. The adsorption of a series of cationic surfactants with similar structures to CTAB on disturbed n-alkanethiolate SAMs was also explored. These surfactants had similar adsorptive behavior and showed nearly linear adsorption characteristics with the length of their hydrophobic tails.     

Multivariate risk models under heavy‐tailed risks

In this paper, we consider four common types of ruin probabilities for a discrete‐time multivariate risk model, where the insurer is assumed to be exposed to a vector of net losses resulting from a number of business lines over each period. By assuming a large initial capital for the risk model and regularly varying distributions for the net losses, we establish some interesting asymptotic estimates for ruin probabilities in terms of the upper tail dependence function of the net loss vector. Our results insightfully characterize how the dependence structure among the individual net losses affect the ruin probabilities in an asymptotic sense, and more importantly, from our main results, explicit asymptotic estimates for those ruin probabilities can be obtained via specifying a copula for the net loss vectors. Copyright © 2013 John Wiley & Sons, Ltd.     

Research on PAN Nascent Fiber Interior Microstructure through Ultrasonic Etching and Ultrathin Sectioning

The interior microstructures of polyacrylonitrile nascent fibers is studied by the scanning electronic microscopy and the high-resolution transmission electron microscopy through ultrasonic etching and ultrathin sectioning. Due to the orientation and fold of molecular chains, the lamellae of 50–80 nm in thickness are formed. A high number of pores, ranging from dozens to two hundred nanometers in diameters exist between the lamellae, which result from residual solvent. The fibril structure is formed in the nascent fiber during the coagulation process, which are oriented along the fiber axis. An uneven tensile stress distribution leads to the formation of skin-core structures in the nascent fiber during the dry-jet wet spinning process.     

Fibrillar structure development of polyacrylonitrile fibers treated by ultrasonic etching in oxidative stabilization

Polyacrylonitrile fibers were oxidatively stabilized through 10 gradient‐elevated temperature zones in sequence. The ultrasonic etching method was used for fibril separation of fibers heated at different temperatures, and the fibrillar structure development was studied by scanning electron microscopy. The voids among fibrils are the weak combination points. Under ultrasonic etching, the voids are enlarged. Subsequently, the solvent enters and spreads among fibrils, which results in the separation of fibrils. Separated fibrils with diameters of 100–400 nm appear in fibers heated at less than 235°C. Fibrils in fibers heated from 195°C to 235°C tend to adhere to each other, and the observed macrofibrils are composed of several to dozens of fibrils. For fibers heated from 195°C to 245°C, only a few fibril bundles emerge on the skin near the fiber end, and the fibrils manifest themselves as numerous protuberances on the cross section. In the ranges of 255–275°C, fibrils compactly combine with each other, which suggests insolubility and infusibility, and no separated fibrils appear. The fibrils arrange in a systematic way along the fiber axis and grooves parallel to the fiber axis on the fibers' surface. These grooves are the macro behavior of fibrils arranging on the fiber surface. Copyright © 2017 John Wiley & Sons, Ltd.     

Voltammetric Detection of Ofloxacin in Human Urine at a Congo Red Functionalized Water‐Soluble Carbon Nanotube Film Electrode

A simple physical method was developed for the surface modification and the solubilization of MWNTs in water by Congo red. The resulting water‐soluble MWNTs (MWNTs‐CR) can form stable and uniform films on solid supports when dried, which was used to fabricate MWNTs‐CR modified glassy carbon electrodes (MWNTs‐CR/GCE). Voltammetric studies showed that MWNTs‐CR/GCE exhibited a strong enhancement effect on the electrooxidation of ofloxacin. MWNTs‐CR films were also proved to possess overwhelming advantages as electrochemical sensing films over other commonly used MWNTs composite films (e.g., MWNTs‐DHP and MWNTs‐Nafion), reflected by the higher oxidation current, lower background and stronger accumulation capacity towards less soluble species. The sensitive oxidation of ofloxacin at MWNTs‐CR/GCE was used for the determination of ofloxacin. Under optimal conditions, the oxidation current was proportional to ofloxacin concentration in the ranges of 5×10^?8–3.0×10^?5 M. The detection limit of 9×10^?9 M was obtained for 350 s accumulation at open circuit (S/N=3). This method was applied to the determination of ofloxacin in human urine and the result was satisfying.