Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).     

Novel metal-linked face-to-face porphyrazine dimer

We report the synthesis and physical studies of a novel porphyrazine (pz) dimer [1[Ni,Cu]]2, which has Ni(II) ions incorporated into the pz cores and is linked by two Cu(II) ions coordinated to bis(picolinamide) chelates attached to the pz periphery. [1[Ni,Cu]]2 was prepared from precursor pz 2 with a selenodiazole ring fused to the pz core. This ring was deprotected to form the diamino-pz 3, which reacted with 2 mol of picolinoyl chloride hydrochloride to form pz 1[2H,2H], with peripheral bis(picolinamide) chelates; this was metalated to form [1[Ni,Cu]]2. The crystal structures of 1[2H,2H] and [1[Ni,Cu]]2 are presented. The latter is a dimer in which parallel, face-to-face pz's with an average separation of 3.30 angstroms are linked through the peripheral picolinamide ligands by a pair of peripheral Cu(II) ions. Each Cu(II) is coordinated with distorted square-planar geometry by a picolinamide from each pz. In this report, we focus on the interaction of these two peripheral Cu(II) ions. We discuss the preparation and magnetic properties of the pz dimer complex [1[Ni,Cu]]2 with two Cu(II) ions in the peripheral chelate but a diamagnetic metal ion Ni(II) in the pz core. Although [1[Ni,Cu]]2 contains two Cu(II) ions (S = 1/2), we could detect no electron paramagnetic resonance signal, which suggests very strong antiferromagnetic exchange between those two Cu(II) ions. Temperature-dependent magnetic susceptibility measurement gives an exchange splitting between the S = 0 ground state and the excited triplet state of delta = 660 cm(-1).     

Ultraviolet emission spectra of sunbeds

It is well known that UV radiation contributes to the development of skin cancer. Exposure to solar radiation is predominantly responsible for the high incidence rate of skin cancer, but there are also indications that sunbeds are involved. The aim of the present investigation was to determine the UV emission spectra of sunbeds. It included the most common sunbed models, which cover more than 50% of the Swiss market. The UV emission spectra of sunbeds have special characteristics and are different from the sun spectrum, which can be seen in high-resolution spectral measurements. Sunbed emission spectra are similar to the sun spectrum in the UVB (280-320 nm) range but reach values 10 to 15 times higher in the UVA (320-400 nm) range. An average erythema-effective irradiance of 0.33 W/m2 was determined for sunbeds. This corresponds to a UV index of 13, which is significantly higher than the UV index of 8.5 of the high summer sun at noon at intermediate latitudes. The measurements were spread over the whole effective area of the sunbeds, and an inhomogeneous distribution of the irradiances with variations of up to 30% from the average value was found.     

SPOCC-194, a new high functional group density PEG-based resin for solid-phase organic synthesis

A novel polymer matrix for solid-phase synthesis, SPOCC(194) resin (1), was designed featuring a backbone of homogeneous tetraethylene glycol (TEG(194)) macromonomer linked by quaternary carbon junctions and terminating in primary alcohol functionality. Beaded SPOCC(194) resin was effectively prepared by suspension polymerization of oxetanylated TEG macromonomer 5 in stirred silicon oil. Mechanically stable and inert to a diverse range of reaction conditions, SPOCC(194) possessed a high hydroxyl group loading (0.9-1.2 mmol/g) for substrate attachment and swelled effectively ( approximately 2-4 mL/g) in a variety of organic and aqueous solvents. Developed for solid-phase synthesis at high reactant concentrations for driving organic and aqueous reactions to completion, SPOCC(194) exhibited high functional group density (mmol/mL) similar to that of low-loaded aminomethylated polystyrene-divinylbenzene copolymer (PS-1%DVB) yet significantly higher than that of PEGA(1900), SPOCC(1500), and TentaGel S. High-resolution MAS NMR spectra of Fmoc-derivatized SPOCC(194) indicate that monitoring of functional group transformation is possible. Moreover, by employment of a nonaromatic resin-linker combination, electrophilic chemistry, such as Lewis acid catalyzed glycosylation and Friedel-Crafts acylation, was selectively performed on substrate bound to SPOCC(194) resin. Such properties make SPOCC(194) resin a promising new polymer matrix for the support-bound construction of small organic molecules by parallel and combinatorial synthesis and the scavenging of solution-phase reactants or byproducts.     

High electron mobility in solution-cast and vapor-deposited phenacyl-quaterthiophene-based field-effect transistors: toward N-type polythiophenes

New carbonyl-functionalized quaterthiophenes, 5,5' '-diperfluorophenylcarbonyl-2,2':5',2' ':5' ',2' '-quaterthiophene [DFCO-4T], 5,5' '-diphenyl-2,2':5',2' ':5' ',2' '-quaterthiophene [DPCO-4T], and a polymer having the same basic motif as DFCO-4T, poly{1,4-bis[(3'-n-octyl-2,2'-dithiophene)carbonyl]-2,3,5,6-tetrafluorobenzene} [P(COFCO-4T)], have been synthesized, characterized, and the crystal structures of the molecules determined. Field-effect transistors fabricated with vapor-deposited and solution-cast films of DFCO-4T exhibit very high Ion:Ioff current ratios (up to 108) and electron mobilities up to approximately 0.51 and approximately 0.25 cm2.V-1.s-1, respectively. Solution-cast blends of P(COFCO-4T) and DFCO-4T (1:1 weight ratio) exhibit an electron mobility of approximately 0.01 cm2.V-1.s-1 (Ion:Ioff = 104).     

Lifetime of 2s2p 23s 3 P in N II and other allowed triplet transitions

Systematic transition calculations have been performed for all triplet decay channels from 2s2p ²3s ³ P of N II. The lifetime of 0.505 ns compares favourably with experiment. Transitions in absorption from the 2s ²2p ^{2 3} P ground state have also been determined along with a number of other triplet transitions. Length and velocity forms of thef-value are in agreement at the 2–3% level for most transitions.     

Controlling the DNA binding specificity of bHLH proteins through intramolecular interactions

Reversible control of the conformation of proteins was employed to probe the relationship between flexibility and specificity of the basic helix-loop-helix protein MyoD. A fusion protein (apaMyoD) was designed where the basic DNA binding helix of MyoD was stablized by an amino-terminal extension with a sequence derived from the bee venom peptide apamin. The disulfide-stabilized helix from apamin served as a nucleus for a helix that extended for a further ten residues, thereby holding apaMyoD's DNA recognition helix in a predominantly alpha-helical conformation. The thermal stability of the DNA complexes of apaMyoD was increased by 13 degrees C relative to MyoD-bHLH. Measurements of the fluorescence anisotropy change on DNA binding indicated that apaMyoD bound to E-box-containing DNA sequences with enhanced affinity relative to MyoD-bHLH. Consequently, the DNA binding specificity of apaMyoD was increased 10-fold.     

Oxidation of isobutane catalyzed by vanadyl, copper and cesium substituted H3PMo12O40

Effects of Cs⁺, H⁺ and Cu²⁺ counterions in the vanadium containing heteropoly compounds Cs_xH_1-xVO[PMo₁₂O₄₀] and Cs_yH_0.5-yCu_0.25VO[PMo₁₂O₄₀] on the catalytic oxidation of isobutane and characterization by TGA, IR and ESR spectroscopies are reported. A high selectivity of 76% for methacrylic acid and methacrolein together has been obtained with Cs_0.75H_0.25VO[PMo₁₂O₄₀] catalysts at a reactivity of 5.3x10^-1 mmol/h cm³.     

Syntheses and Structures of Two New Cu/Nb/pyrazine Complexes: Three dimensional CuNb(pyz)2OF5 · (pyz)(H2O) and two dimensional [Cu(pyz)2.5]+ [NbF6]− · (pyz)

Crystals of CuNb(pyz)₂OF₅ · (pyz)(H₂O) ( 1 ) and [Cu(pyz)_2.5]⁺ [NbF₆]^? · (pyz) ( 2 ) were grown (150°C and autogeneous pressures) from CuO, 1/2(Nb₂O₅), (HF)_x · pyridine, and H₂O in excess pyrazine. Light blue single crystals of ( 1 ) are orthorhombic, crystallizing in space group Cccm (No. 66), with a = 14.547(1) Å, b = 16.135(2) Å, c = 13.803(2) Å, and Z = 8. The structure of ( 1 ) contains corner shared [Cu(pyz)_4/2F_2/2]⁺, [Cu(pyz)_4/2O_2/2], and [NbF₄O_1/2F_1/2]^?0.5 octahedra. Orange crystals of ( 2 ) are monoclinic, crystallizing in space group C2/c (No. 15), with a = 11.792(8) Å, b = 17.123(3) Å, c = 17.051(5) Å, β = 90.04(4)°, and Z = 8. The structure of ( 2 ) contains puckered rings of corner shared [Cu(pyz)(pyz)_3/2]⁺ tetrahedra and isolated [NbF₆]^? anions within the rings.     

An Aldehyde Responsive,Cleavable Linker for Glucose Responsive Insulins

A glucose responsive insulin (GRI) that responds to changes in blood glucose concentrations has remained an elusive goal. Here we describe the development of glucose cleavable linkers based on hydrazone and thiazolidine structures. We developed linkers with low levels of spontaneous hydrolysis but increased level of hydrolysis with rising concentrations of glucose, which demonstrated their glucose responsiveness in vitro. Lipidated hydrazones and thiazolidines were conjugated to the LysB29 side-chain of HI by pH-controlled acylations providing GRIs with glucose responsiveness confirmed in vitro for thiazolidines. Clamp studies showed increased glucose infusion at hyperglycemic conditions for one GRI indicative of a true glucose response. The glucose responsive cleavable linker in these GRIs allow changes in glucose levels to drive the release of active insulin from a circulating depot. We have demonstrated an unprecedented, chemically responsive linker concept for biopharmaceuticals.