Interparticle interactions in agglomerates of alpha-Fe2O3 nanoparticles: influence of grinding

We have chemically prepared a sample of antiferromagnetic alpha-Fe2O3 nanoparticles by a gel-sol technique. M?ssbauer spectra of the as-prepared sample showed that superparamagnetic relaxation was suppressed due to strong magnetic interparticle interactions even at room temperature. However, subsequent grinding of the sample by hand in a mortar for some minutes resulted in fast superparamagnetic relaxation of some of the particles. The effect was even more dramatic if the alpha-Fe2O3 powder was ground for a longer time or together with nonmagnetic eta-Al2O3 nanoparticles. Similar effects were found after low-energy ball milling. Thus it is found that the agglomeration of the nanoparticles during preparation under wet conditions results in strong magnetic interparticle interaction, but a relatively gentle mechanical treatment is sufficient to break up the agglomerates, resulting in much weaker interactions. We show that these effects can also be seen when a soil sample containing magnetic nanoparticles is ground.     

3-methylthio-1,2-dithiolylium salts : Reaction with 4-hydroxy-6-methyl-2H-pyran-2-one and 4-hydroxycoumarin

The reaction of 4- and 5-aryl-3-methylthio-1,2-dithiolylium iodides with 4-hydroxy-6-methyl-2$\text{H}$-pyran-2-one and 4-hydroxycoumarin has been studied. 4-Substituted salts yielded 3-aryl-7-methyl-2-thioxo-2$\text{H}$,5$\text{H}$-pyrano [3,2-c]pyran-5-ones and 3-aryl-2-thioxo-2H,5H-pyrano[3,2-c]benzo[e]pyran-5-ones, respectively, whereas 5-substituted salts gave rise to 3-(5′-aryl-1′,2′-dithiol-3′-ylidene)-6-methyl-2$\text{H}$-pyran-2,4-diones and 3-(5′-aryl-1′,2′-dithiol-3′-ylidene)-2$\text{H}$-benzo [b]-pyran-2,4-diones.     

Bilirubin/rat serum albumin interaction

Essential differences are demonstrated between bilirubin binding to rat serum proteins and to albumin in human serum. Acidimetric titration of rat serum with and without added bilirubin shows that binding of bilirubin acid in the range of pH from 6.8 to 8.8 takes place with release of less than one hydrogen ion per molecule of bound bilirubin. With human serum, two hydrogen ions are released, indicating binding of bilirubin dianion. The binding equilibrium of N-[4-[(4-aminophenyl)-sulfonyl]phenyl]-acetamide (MADDS) to rat serum albumin is influenced slightly by cobinding of bilirubin whereas MADDS and bilirubin bind competitively to human serum albumin. Finally, the rate of oxidation of bilirubin with hydrogen peroxide and peroxidase is decreased moderately by addition of rat serum albumin and strongly by the human protein, indicating that biliribin in its complex with rat serum albumin is subject to oxidation while the complex with human serum albumin is protected. These differences should be considered when rats are used as a model in experimental studies aiming at prevention of bilirubin encephalopathy in human neonates.     

Magnetic Properties of Nanoparticles of Antiferromagnetic Materials

Hyperfine Interactions - The magnetic properties of antiferromagnetic nanoparticles have been studied by Mössbauer spectroscopy and neutron scattering. Temperature series of Mössbauer...     

Uncertainty budget for determinations of mean isomer shift from Mössbauer spectra

The magnetite/maghemite content within iron oxide nanoparticles can be determined using the mean isomer shift (\(\overline {\delta }\)). However, accurate characterisation of the composition is limited by the uncertainty associated with \(\overline {\delta }\). We have identified four independent sources of uncertainty and developed a quantitative expression for the uncertainty budget. Sources of uncertainty are categorised as follows: that from the fitting of the Mössbauer spectrum (σ _fit), that of the calibration of the α-Fe reference spectrum (σ _cal), thermal corrections to the spectrum due to second order Doppler shift (SODS) (σ _Δδ ) and other experimental errors (σ _err). Each contribution is discussed in detail using ⁵⁷Fe Mössbauer spectra obtained from an iron oxide nanoparticle system at temperatures between 16 K and 295 K on different spectrometers in two different laboratories.     

Temperature dependence of the magnetization of canted spin structures

Numerous studies of the low-temperature saturation magnetization of ferrimagnetic nanoparticles and diamagnetically substituted ferrites have shown an anomalous temperature dependence. It has been suggested that this is related to freezing of canted magnetic structures. We present models for the temperature dependence of the magnetization of a simple canted spin structure in which relaxation can take place at finite temperatures between spin configurations with different canting angles. We show that the saturation magnetization may either decrease or increase with decreasing temperature, depending on the ratio of the exchange coupling constants. This is in agreement with experimental observations.     

Study of the composition and gas-phase release characteristics of salt material extracted from MSW ash particles using STA

The ash material generated from the MSW incineration contains large amounts of alkali metals, heavy metals, chlorine and sulfur mainly deposited as inorganic salts and/or oxides on the surface of the Si-rich ash particles. In this work, the composition and gas-phase release characteristics of salt material extracted from MSW ash particles using a six-stage leaching process is studied using simultaneous thermal analysis (STA). The produced results provide useful information regarding the composition of the salt material and its melting behavior that is considered to play an important role to deposition and corrosion problems at MSW incinerators. The results may be used to model the deposition process and to the better understanding of the corrosion process during MSW incineration.     

Dual‐Function Cobalt–Nickel Nanoparticles Tailored for High‐Temperature Induction‐Heated Steam Methane Reforming

The tailored chemical synthesis of binary and ternary alloy nanoparticles with a uniform elemental composition is presented. Their dual use as magnetic susceptors for induction heating and catalytic agent for steam reforming of methane to produce hydrogen at temperatures near and above 800 °C is demonstrated. The heating and catalytic performance of two chemically synthesized samples of CoNi and Cu ? CoNi are compared and held against a traditional Ni‐based reforming catalyst. The structural, magnetic, and catalytic properties of the samples were characterized by X‐ray diffraction, elemental analysis, magnetometry, and reactivity measurements. For induction‐heated catalysts, the conversion rate of methane is limited by chemical reactivity, as opposed to the case of traditional externally heated reformers where heat transport limitations are the limiting factor. Catalyst production by the synthetic route allows controlled doping with miniscule concentrations of auxiliary metals.