Implementation of recycling routes for scanning probe microscopy tips.

In this work, effective, yet simple, recycling mechanisms for used scanning probe microscopy (SPM) tips were implemented. Comprising a tip profile characterization methodology and specific cleaning procedures, which decontaminate SPM tips whether the contamination nature is known or not, such routes were optimized during numerous tests with brand new, previously used, and already discarded categories of SPM tips. The results show that if the used tip suffered contamination only, but no physical damages, during its scanning lifetime, it becomes readily available for reutilization after the cleansing process, characterizing a recycling route. On the other hand, if the tip went through wear and breakages during its utilization, it still can be decontaminated, but may not be directly reutilized due to its inadequate physical profile. Nevertheless, the methodology developed in this work may yet be applied as part of a more complex recycling route.     

Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration

The catalyst used in fluidized catalytic cracking (FCC) units of refineries after several recovery cycles in regeneration units, reduces its activity and it is partially substituted by new catalyst in the process. As it has a high silicon and aluminum oxides content, the pozzolanic properties of a Brazilian FCC spent residual catalyst, used in different substitution degrees to cement, were evaluated by three thermal analysis techniques during the early stages of hydration of a type II Portland cement. NCDTA curves show in real time that the residual catalyst, accelerates the stages of cement hydration. TG and DSC curves of respective pastes after 24 h of hydration evidence the pozzolanic activity of the waste, respectively, by the lower water mass loss during the dehydroxylation of the residual calcium hydroxide and by the lower dehydroxylation endothermal effect. Within the analyzed period, the higher is the cement substitution degree, the higher is the pozzolanic activity of the residual catalyst.     

Hair color changes and protein damage caused by ultraviolet radiation

Ultraviolet and visible radiations are known to damage hair. However, quantitative data relating damage to hair type, proteins and color to the radiation wavelength are missing. We studied the effect of UV plus visible, UVA plus visible, visible mercury-vapor lamp radiation and sunlight on (blended) virgin dark-brown, blond and red hair and (one head) virgin black and curly dark-brown hair. All hair types showed a substantial increase in protein loss in water after lamp and sun irradiation. The damaging effect of UVB was about 2-5 times higher than that of UVA plus visible radiation, depending on the hair type. Significant color changes were also observed in every hair type, after lamp and sun irradiation, being more pronounced for the light colored hairs. The luminosity difference parameter was the major contributor to the hair color changes, but significant changes in the red-green and yellow-blue parameters of every hair were observed. In this case, the damaging effect is ascribable mainly to UVA radiation. No significant changes in the mechanical properties or topography were observed in any case. We discuss these results in terms of hair type and composition and melanin types.     

Preparation of lucifer yellow fluorescent liposomes: A method for cells' membrane labeling

This report describes a method to conjugate lucifer yellow to the external surface of liposomes. The heterobifunctional cross-linking reagentN-succinimidyl 3-(2-pyridyldithio)propionate has been used to activate DMPE molecules. The DMPE-dithiopyridine product has been mixed with DMPC to prepare liposome vesicles. These have been reduced by DTT and finally reacted with lucifer yellow-iodoacetamide to produce the fluorescence-labeled vesicles. The quenching of their fluorescence intensity by Kl is consistent with fully exposed fluorophores. The decay of the fluorescence intensity of the lipid-bound lucifer yellow is biexponential (₁=7.9 ns; ₂=1.1 ns), with a relative yield of 0.16. When the fluorescent liposomes are mixed with cells, the lucifer yellow-DMPE derivative is transferred. Boar spermatozoa and peripheral human blood lymphocytes have been used as cellular models. The extent of incorporation is dependent on the incubation time and temperature. At 36°C, lucifer yellow fluorescence appears in the spermatozoa cells after 10 min of incubation and reaches its maximum at about 60 min. The fluorescent phospholipid derivative seems to incorporate specifically into membrane structures. The highest labeling ratio is observed with integer, scarcely motile, spermatozoa. A poorer labeling yield (15%) is found with lymphocytes. Interestingly, photobleaching due to epiillumination of the labeled cells is apparently negligible and cells are clearly visible after irradiation times ranging from several minutes to few hours.A preliminary account of this work was presented at the Quarto Simposio su Biotecnologie Biochimiche, Capri, 28–30 June 1992.     

Electrochemical and ESR study of 5-nitrofuryl-containing thiosemicarbazones antiprotozoal drugs

Cyclic voltammetry and electron spin resonance (ESR) techniques were used in the investigation of several potential antiprotozoal thiosemicarbazones nitrofurane derivatives. A self-protonation process involving the protonation of the nitro group due to the presence of an acidic proton in the thiosemicarbazone moiety was observed in the first step of a CEE(rev) reduction mechanism of these derivatives. ESR spectra of the free radicals obtained by electrolytic reduction were characterized and analyzed. AM1 methodology was used to obtain the optimized geometries and UB3LYP calculations were performed to obtain the theoretical hyperfine coupling constants. The theoretical study exhibited an unusual assignment of the spin densities showing a free radical centered in the thiosemicarbazone moiety rather than the nitro which are in agreement with the experimental hyperfine pattern.     

Structural refinement of Nd[Fe(CN)6]·4H2O and study of NdFeO3 obtained by its oxidative thermal decomposition at very low temperatures

The crystal structure of Nd[Fe(CN)₆]·4H₂O has been refined by Rietveld analysis using high resolution synchrotron powder X-ray diffraction data. It belonged to the orthorhombic crystal system, Cmcm space group, with cell parameters: , and . The change in space group from P6₃/m which is observed in the pentahydrates (LnFe(CN)₆·5H₂O) to Cmcm in the tetrahydrates has been analyzed to be a consequence of the change in 9-fold coordination of Nd³⁺ in the pentahydrates to 8-fold coordination in the tetrahydrates, which changes the Nd³⁺ environment from tricapped trigonal prism to a distorted tricapped trigonal prism or square antiprism. Its decomposition process in air to produce NdFeO₃ has been followed by thermogravimetric and differential thermal analysis, IR spectroscopy and laboratory powder XRD. We found that it is possible to synthesize crystalline NdFeO₃ at temperatures as low as 380 °C and refine the structure of single phase crystalline NdFeO₃ synthesized by this method at 600 °C.     

Unexpected formation of 1-diethylaminobutadiene in photosensitized oxidation of triethylamine induced by 2,3-dihydro-oxoisoaporphine dyes. A 1H NMR and isotopic exchange study

[reaction: see text] Photoreduction of oxoisoaporphine dyes occurs via a stepwise mechanism of electron-proton-electron transfer that leads to the N-hydrogen oxoisoaporphine anion. When triethylamine, TEA, was used as the electron donor in anaerobic conditions, 1-diethylaminobutadiene, DEAB, was one of the oxidation products of TEA, among diethylamine and acetaldehyde. DEAB was identified by (1)H NMR and GC-MS experiments by comparison with the authentic 1-diethylaminobutadiene. This is the first report of a butadienyl derivative formed in the dye-sensitized photooxidation of TEA. In addition, isotopic exchange experiments with TEA-d(15) and D(2)O show that the hydrogens at carbon-2 and carbon-4 of the butadienyl moiety are exchangeable. The observed isotopic exchange pattern could be explained by the head-to-tail coupling of an N,N-diethylvinylamine intermediate that exchanges hydrogens at the C-beta via the enammonium ion.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Bond dissociation energies for radical dimers derived from highly stabilized carbon-centered radicals

[reaction: see text] The temperature dependence of the dissociation of dimers formed from highly stabilized carbon-centered radicals has been examined. Analysis of the data yields the bond dissociation energy (BDE) for the central head-to-head C-C bond in these compounds. For example, for the dimer derived from 3-phenyl-2-coumaranone, BDE is 23.6 kcal/mol and the C-C bond length 1.596 A, a rather long value for a sigma bond.