Recent changes in A-level Mathematics: is the availability and uptake of mechanics declining yet more?

In the past 6 years changes have occurred in GCE A-levels. Inparticular, there have been several major changes in A-levelMathematics courses. As engineering students are usually requiredto have studied A-level Mathematics, or its equivalent, thesechanges have had an effect on their prior mathematical knowledge.Moreover, engineering students traditionally obtained a goodgrounding in mechanics as part of their A-level Mathematicsqualification. However, mechanics, which was once included inthe core syllabus, is now optional. This article investigatesthe current availability and uptake of mechanics modules withinA-level Mathematics courses in schools. Comparisons are drawnbetween these results and results of a survey of schools in2004 and surveys of first year engineering students conductedin 2004 and 2005. It is found that there is a decline in theavailability of mechanics modules and the uptake of more thanone mechanics module has also decreased. The implications ofthese findings for engineering educators are discussed.     

Tobacco protein separation by aqueous two-phase extraction

Tobacco has long been considered as a host to produce large quantity of high-valued recombinant proteins. However, dealing with large quantities of biomass is a challenge for downstream processing. Aqueous two-phase extraction (ATPE) has been widely used in purifying proteins from various sources. It is a protein-friendly process and can be scaled up easily. In this paper, ATPE was studied for its applicability to recombinant protein purification from tobacco with egg white lysozyme as the model protein. Separate experiments with poly(ethylene glycol) (PEG)-salt-tobacco extract and PEG-salt-lysozyme were carried out to determine the partition behavior of tobacco protein and lysozyme, respectively. Two-level fractional factorial designs were used to study the effects of factors such as, PEG molecular mass, PEG concentration, the concentration of phase forming salt, sodium chloride concentration and pH, on protein partitioning. The results showed that, among the studied systems, PEG-sodium sulfate system was most suitable for lysozyme purification. Detailed experiments were conducted by spiking lysozyme into the tobacco extract. The conditions with highest selectivity of lysozyme over native tobacco protein were determined using a response surface design. The purification factor was further improved by decreasing the phase ratio along the tie line corresponding to the phase compositions with the highest selectivity. Under selected conditions the lysozyme yield was predicted to be 87% with a purification factor of 4 and concentration factor of 14. From this study, ATPE was shown to be suitable for initial protein recovery and partial purification from transgenic tobacco.     

General approach for the synthesis of chiral perylenequinones via catalytic enantioselective oxidative biaryl coupling

By using oxygen as the terminal oxidant, copper complexes derived from chiral 1,5-diaza-cis-decalin catalyze the enantioselective oxidative biaryl coupling of highly functionalized naphthols to provide octa- and decasubstituted binaphthalenes with high selectivity (86-90% ee). Products containing very electron-rich naphthalenes were prone to epimerization under the reaction conditions. This epimerization could be suppressed by employing naphthol starting materials with phenol protecting groups that attenuated the electron-rich nature of the naphthalenes. Direct oxidation of the resultant chiral 1,1'-binaphthol framework completed the first asymmetric synthesis of a perylenequinone containing only an axial chirality element.     

Unsymmetrical selenides from selenocyanates and methyl grignard

The addition of methyl Grignard to diethyl acetamido(cyanoselenobenzyl)malonates 3 and 4 at ?78° followed by hydrolysis yields the 3-(4-and 3-methylselenophenyl)alanines 1 and 2.     

Synthesis,Crystal Structure,and Spectral Properties of a Cobalt(II) Complex with N‐Salicylidene‐p‐Toluidine

The complex Co(C₁₄H₁₃NO)₂Cl₂ with the protonated N‐salicylidene‐p‐toluidine ligand was synthesized from an ethanolic solution of CoCl₂·6H₂O and N‐salicylidene‐p‐toluidine. The crystal structure was determined from X‐ray single crystal data (monoclinic, space group Cc, a = 1496.2(3) pm, b = 1257.4(4) pm, c = 1544.6(3) pm, β = 115.01(1)°, Z = 4). Co²⁺ adopts a distorted tetrahedral geometry. The UV‐Vis and IR spectra of the complex are discussed.     

Oxygen isotope corrections for online delta(34)S analysis

Elemental analyzers have been successfully coupled to stable-isotope-ratio mass spectrometers for online measurements of the delta(34)S isotopic composition of plants, animals and soils. We found that the online technology for automated delta(34)S isotopic determinations did not yield reproducible oxygen isotopic compositions in the SO(2) produced, and as a result calculated delta(34)S values were often 1-3 per thousand too high versus their correct values, particularly for plant and animal samples with high C/S ratio. Here we provide empirical and analytical methods for correcting the S isotope values for oxygen isotope variations, and further detail a new SO(2)-SiO(2) buffering method that minimizes detrimental oxygen isotope variations in SO(2).     

Parametric studies of interaction strengths in polymer/CO2 systems: discontinuous molecular dynamics simulations

Discontinuous molecular dynamics simulations are performed on homopolymer/solvent and surfactant/solvent systems. The homopolymer and surfactant molecules are modeled as freely jointed square-well chains. Solvent molecules are modeled as both hard spheres and square-well spheres. We explore how the various interaction parameters affect the types of phase behavior and micellization observed in the homopolymer/solvent and surfactant/solvent systems. Increasing the packing fraction of homopolymers in both hard-sphere solvents and square-well solvents increases the solvent's ability to dissolve homopolymers only when the segment-solvent interaction strength exceeds a critical value. Although only upper critical solution temperature (UCST) behavior is observed for homopolymers in hard-sphere solvents, both UCST and lower critical solution temperature (LCST) behavior are observed for homopolymers in square-well solvents, depending upon the interaction strengths and chain length. This indicates that it is necessary to account for the solvent-solvent attraction to model LCST behavior in supercritical CO2. Our simulation results on surfactants in hard-sphere solvents show that it is necessary to account for the interactions experienced by both the head and tail blocks in order to capture the essential features of surfactant/supercritical CO2 systems.     

Synthesis and conformational analysis by 1H NMR and restrained molecular dynamics simulations of the cyclic decapeptide [Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly]

Summary The design of enzyme mimics with therapeutic and industrial applications has interested both experimental and computational chemists for several decades. Recent advances in the computational methodology of restrained molecular dynamics, used in conjunction with data obtained from two-dimensional ¹H NMR spectroscopy, make it a promising method to study peptide and protein structure and function. Several issues, however, need to be addressed in order to assess the validity of this method for its explanatory and predictive value. Among the issues addressed in this study are: the accuracy and generizability of the GROMOS peptide molecular mechanics force field; the effect of inclusion of solvent on the simulations; and the effect of different types of restraining algorithms on the computational results. The decapeptide Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly, which corresponds to the sequence of ACTH_1–10, has been synthesized, cyclized, and studied by two-dimensional ¹H NMR spectroscopy. Restrained molecular dynamics (RMD) and time-averaged restrained molecular dynamics (TARMD) simulations were carried out on four different distance-geometry starting structures in order to determine and contrast the behavior of cyclic ACTH_1–10 in vacuum and in solution. For the RMD simulations, the structures did not fit the NOE data well, even at high values of the restraining potential. The TARMD simulation method, however, was able to give structures that fit the NOE data at high values of the restraining potential. In both cases, inclusion of explicit solvent molecules in the simulation had little effect on the quality of the fit, although it was found to dampen the motion of the cyclic peptide. For both simulation techniques, the number and size of the NOE violations increased as the restraining potential approached zero. This is due, presumably, to inadequacies in the force field. Additional TARMD vacuum-phase simulations, run with a larger memory length or with a larger sampling size (16 additional distance-geometry structures), yielded no significantly different results. The computed data were then analyzed to help explain the sparse NOE data and poor chymotryptic activity of the cyclic peptide. Cyclic ACTH_1–10, which contains the functional moieties of the catalytic triad of chymotrypsin, was evaluated as a potential mimic of chymotrypsin by measurement of the rate of hydrolysis of esters of L-and d-phenylalanine. The poor rate of hydrolysis is attributed to the flexibility of the decapeptide, the motion of the side chains, which result in the absence of long-range NOEs, the small size of the macrocycle relative to that of the substrate, and the inappropriate orientation of the Gly, His, and Ser residues. The results demonstrate the utility of this method in computer-aided molecular design of cyclic peptides and suggest structural modifications for future work based on a larger and more rigid peptide framework.