ParaHydrogen Polarized Ethyl-[1-13C]pyruvate in Water,a Key Substrate for Fostering the PHIP-SAH Approach to Metabolic Imaging

An efficient synthesis of vinyl-[1-¹³C]pyruvate has been reported, from which ¹³C hyperpolarized (HP) ethyl-[1-¹³C]pyruvate has been obtained by means of ParaHydrogen Induced Polarization (PHIP). Due to the intrinsic lability of pyruvate, which leads quickly to degradation of the reaction mixture even under mild reaction conditions, the vinyl-ester has been synthesized through the intermediacy of a more stable ketal derivative. ¹³C and ¹H hyperpolarizations of ethyl-[1-¹³C]pyruvate, hydrogenated using ParaHydrogen, have been compared to those observed on the more widely used allyl-derivative. It has been demonstrated that the spin order transfer from ParaHydrogen protons to ¹³C, is more efficient on the ethyl than on the allyl-esterdue to the larger J-couplings involved. The main requirements needed for the biological application of this HP product have been met, i. e. an aqueous solution of the product at high concentration (40 mM) with a good ¹³C polarization level (4.8 %) has been obtained. The in vitro metabolic transformation of the HP ethyl-[1-¹³C]pyruvate, catalyzed by an esterase, has been observed. This substrate appears to be a good candidate for in vivo metabolic investigations using PHIP hyperpolarized probes.     

AFM, SEM and GIXRD studies of thin films of red polycarbazolyldiacetylenes

In this paper we report the results of a morphological and structural investigation on film properties of a soluble polydiacetylene, the poly[1,6-bis(3,6-dihexadecyl-N-carbazolyl)-2,4-hexadiyne] (polyDCHD-HS). The red films of this polymer, prepared by standard spin-coating techniques, revealed absence of linear dichroism and birefringence in contrast with the ordered mesophases detected by powder X-ray studies. In order to interpret the optical behavior of this polymer, we performed AFM and SEM studies of polyDCHD-HS films spun on hydrophylic and hydrophobic glass substrates. We found the presence of surfaces organized in rod-like particles, more regularly oriented on the hydrophylic substrate. GIXRD studies, carried out on films sufficiently thick to allow the observation of the diffraction pattern, reveled the presence of a lamellar structure with a spacing of 3.22 nm. The low intensity of the diffraction peaks and the isotropic linear optical properties of the films show that the lamellar mesophases are not extended over large areas. These findings were compared with the data obtained from AFM and SEM studies on films of two other polydiacetylenes, the poly[1-(3,6-dihexadexyl-N-carbazolyl)-6-(N-carbazolyl)-2,4-hexadyine] (polya-DCHD) and the poly[1,6-bis(3,6-dipalmitoyl-N-carbazolyl)-2,4-hexadyine] (polyDPCHD), spun on hydrophylic glass substrate. The results confirmed the presence of nodular morphologies which seem to be a general characteristic of this class of materials. The particles organization appears instead related to the chemical nature of the substituents on the carbazolyl rings.     

Long-range predictive adaptive fuzzy relational control

A class of long-range predictive adaptive fuzzy relational controllers is presented. The plant behavior is described over an extended time horizon by a fuzzy relational model which is identified based on input-output closed-loop observations of the plant variables. In this class of adaptive controllers the control law attempts to minimize a quadratic cost over an extended control horizon. When used with linear models, this approach has revealed a significant potential for overcoming the limitations of one-step ahead schemes, such as the stabilization of non-minimum phase plants. Here, a uniform framework is adopted for implementing both the fuzzy model and the fuzzy controller, namely distributed fuzzy relational structures gaining from their massive parallel processing features and from the learning capabilities typical of the connectivist approaches. Issues such as maintenance during the adaptation process of the meaning of linguistic terms used at both fuzzy systems interfaces are addressed, namely by introducing a new design methodology for on-line fuzzy systems interface adaptation. The examples presented reinforce the claim of the usefulness of this new approach.     

Large-scale production of cellulose-binding domains. Adsorption studies using CBD-FITC conjugates

A method for the gram-scale production of cellulose-binding domains (CBD) through the proteolytic digestion of a commercial enzymatic preparation (Celluclast) was developed. The CBD obtained, isolated from Trichoderma reesei cellobiohydrolase I, is highly pure and heavily glycosylated. The purified peptide has a molecular weight of 8.43 kDa, comprising the binding module, a part of the linker, and about 30% glycosidic moiety. Its properties may thus be different from recombinant ones expressed in bacteria. CBD-fluorescein isothiocyanate conjugates were used to study the CBD-cellulose interaction. The presence of fluorescent peptides adsorbed on crystalline and amorphous cellulose fibers suggests that amorphous regions have a higher concentration of binding sites. The adsorption is reversible, but desorption is a very slow process.     

Sharply 1-transitive subsets of certain permutation groups

In this paper we give a method for constructing sharply 1-transitive permutation sets inside a finite permutation group with certain properties and we apply this method to obtain a family of sharply 1-transitive permutation subsets of the sharply 3-transitive permutation group M(p ^2f ) on PG(1, p ^2f ) for p ^f 1 (mod 4).Work supported by G.N.S.A.G.A. and M.P.I.     

Adsorption of poly(ethylene glycol)s on mercury/aqueous solution interface 1. Kinetics of PEG 8000 adsorption

In order to study the influence of the adsorption of fulvic compounds on voltammetric signals and to understand better the adsorption of these compounds on hydrophobic natural water interfaces, adsorption studies of macromolecules such as poly(ethylene glycol) (HO(CH₂CH₂O)_n) with molecular weight of 8000 were done on the mercury/water interface by a.c. voltammetry at the potential of zero charge. The maximum surface concentration, adsorption equilibrium constant and adsorption rate constant have been determined from the global adsorption mechanism, controlled by two determining steps: diffusion and kinetics of adsorption at the interface.     

Effects of substrate relaxation in regular chemisorption. Hydrogen on graphite

Substrate relaxation is shown to play an important role in the 1 : 2 regular chemisorption of hydrogen atoms above alternate carbon atoms in a graphite monolayer. Binding energy, population analysis and electron density maps show that the direct HC bond is strengthened on relaxation.     

Potentiometric studies on the complexation of copper(II) by phenolic acids as discrete ligand models of humic substances

Studies on the complexation of copper(II) by phenolic acids, as ligand models of humic substances were done by potentiometry. The acids under study were: 3,4-dihydroxyhydrocinnamic acid or hydrocaffeic acid (1), 3,4-dihydroxyphenylacetic acid (2) and 3,4-dihydroxybenzoic acid or protocatechuic acid (3). Acidity constants of the ligands and the formation constants of metal-ligand complexes were evaluated by computer programs. The carboxylic group of the phenolic acids has different pK_a1 values, being the dissociation constants intrinsically related with the distance between the function and the aromatic nucleus. The results obtained allow concluding that acidity constants of the catechol moiety of the compounds are similar with pK_a2 and pK_a3 values between 9.47-9.41 and 11.55-11.70. The complexation properties of the three ligands towards copper(II) ion are quite similar, being the species found not different either in nature or stability. Although the model ligands have some structural differences no significant differences were found in their complexation properties towards copper(II). So, it can be postulated that complexation process is intrinsically related with the presence of a catechol group.     

Phase separation of p53 precedes aggregation and is affected by oncogenic mutations and ligands

Mutant p53 tends to form aggregates with amyloid properties, especially amyloid oligomers inside the nucleus, which are believed to cause oncogenic gain-of-function (GoF). The mechanism of the formation of the aggregates in the nucleus remains uncertain. The present study demonstrated that the DNA-binding domain of p53 (p53C) underwent phase separation (PS) on the pathway to aggregation under various conditions. p53C phase separated in the presence of the crowding agent polyethylene glycol (PEG). Similarly, mutant p53C (M237I and R249S) underwent PS; however, the process evolved to a solid-like phase transition faster than that in the case of wild-type p53C. The data obtained by microscopy of live cells indicated that transfection of mutant full-length p53 into the cells tended to result in PS and phase transition (PT) in the nuclear compartments, which are likely the cause of the GoF effects. Fluorescence recovery after photobleaching (FRAP) experiments revealed liquid characteristics of the condensates in the nucleus. Mutant p53 tended to undergo gel- and solid-like phase transitions in the nucleus and in nuclear bodies demonstrated by slow and incomplete recovery of fluorescence after photobleaching. Polyanions, such as heparin and RNA, were able to modulate PS and PT in vitro. Heparin apparently stabilized the condensates in a gel-like state, and RNA apparently induced a solid-like state of the protein even in the absence of PEG. Conditions that destabilize p53C into a molten globule conformation also produced liquid droplets in the absence of crowding. The disordered transactivation domain (TAD) modulated both phase separation and amyloid aggregation. In summary, our data provide mechanistic insight into the formation of p53 condensates and conditions that may result in the formation of aggregated structures, such as mutant amyloid oligomers, in cancer. The pathway of mutant p53 from liquid droplets to gel-like and solid-like (amyloid) species may be a suitable target for anticancer therapy.

Mutant p53 tends to form aggregates with amyloid properties, especially amyloid oligomers inside the nucleus, which are believed to cause oncogenic gain-of-function (GoF).