Directly visualizing carrier transport and recombination at individual defects within 2D semiconductors

Two-dimensional semiconductors (2DSCs) are promising materials for a wide range of optoelectronic applications. While the fabrication of 2DSCs with thicknesses down to the monolayer limit has been demonstrated through a variety of routes, a robust understanding of carrier transport within these materials is needed to guide the rational design of improved practical devices. In particular, the influence of different types of structural defects on transport is critical, but difficult to interrogate experimentally. Here, a new approach to visualizing carrier transport within 2DSCs, Carrier Generation-Tip Collection Scanning Electrochemical Cell Microscopy (CG-TC SECCM), is described which is capable of providing information at the single-defect level. In this approach, carriers are locally generated within a material using a focused light source and detected as they drive photoelectrochemical reactions at a spatially-offset electrolyte interface created through contact with a pipet-based probe, allowing carrier transport across well-defined, µm-scale paths within a material to be directly interrogated. The efficacy of this approach is demonstrated through studies of minority carrier transport within mechanically-exfoliated n-type WSe₂ nanosheets. CG-TC SECCM imaging experiments carried out within pristine basal planes revealed highly anisotropic hole transport, with in-plane and out-of-plane hole diffusion lengths of 2.8 µm and 5.8 nm, respectively. Experiments were also carried out to probe recombination across individual step edge defects within n-WSe₂ which suggest a significant surface charge (∼5 mC m⁻²) exists at these defects, significantly influencing carrier transport. Together, these studies demonstrate a powerful new approach to visualizing carrier transport and recombination within 2DSCs, down to the single-defect level.

Probe-based electrochemical techniques can be used to map carrier transport and recombination within two-dimensional semiconductors.     

Effect of particulate filler on cell size in membranes formed via liquid–liquid thermally induced phase separation

This paper discusses the effects of adding particulate filler to a system undergoing liquid–liquid thermally induced phase separation (L–L TIPS). While much is known about the growth of droplets in L–L TIPS, little is known about the effect particular fillers have on droplet growth and the final cell size in the resulting microporous membranes. In this work, zeolite particles are shown to have a significant effect on the final cell size of these microporous membranes, the extent of which depends on the particle loading and processing conditions used to form the membrane. Two polymer–diluent–zeolite systems are reported: isotactic polypropylene–diphenyl ether and poly(methyl methacrylate)–cyclohexanol, both with zeolite 4A particles.     

A review on immobilised aptamers for high throughput biomolecular detection and screening

The discovery of Systematic Evolution of Ligands by Exponential Enrichment (SELEX) assay has led to the generation of aptamers from libraries of nucleic acids. Concomitantly, aptamer-target recognition and its potential biomedical applications have become a major research endeavour. Aptamers possess unique properties that make them superior biological receptors to antibodies with a plethora of target molecules. Some specific areas of opportunities explored for aptamer-target interactions include biochemical analysis, cell signalling and targeting, biomolecular purification processes, pathogen detection and, clinical diagnosis and therapy. Most of these potential applications rely on the effective immobilisation of aptamers on support systems to probe target species. Hence, recent research focus is geared towards immobilising aptamers as oligosorbents for biodetection and bioscreening. This article seeks to review advances in immobilised aptameric binding with associated successful milestones and respective limitations. A proposal for high throughput bioscreening using continuous polymeric adsorbents is also presented.     

Synthesis,structure, CMC values,thermodynamics of micellization,steady-state photolysis and biological activities of hexadecylamine cobalt(III) dimethyl glyoximato complexes

Metallosurfactant complexes of the type trans- [Co(DH)₂(HA)X], where DH = Dimethyl glyoxime, HA = Hexadecyl amine and X = Cl⁻, Br⁻, I⁻, N₃ ⁻, NO₂ ⁻ or SCN⁻, were synthesized and characterized by physico-chemical and spectroscopic methods. In addition, the single crystal X-ray structure of the ionic complex trans-[Co(DH)₂(HA)₂][Co(DH)₂(I)₂)] is presented. The critical micelle concentration values of the complexes in ethanol were obtained by measuring the absorption at 290 nm. Specific conductivity data (at 303–313 K) served for the evaluation of the thermodynamics of micellization ) \left( {\Updelta G^{0}_{{{\text{m}}}}, \Updelta H^{0}_{{{\text{m}}}}, \Updelta S^{0}_{\text{m}} } \right) . Steady-state photolysis, cyclic voltammetry and biological activities of the complexes were studied. The compounds were tested for antimicrobial activity.     

Morphological investigation of polylactide/microfibrillated cellulose composites

Optical microscopy and transmission electron microscopy have been used to investigate the morphology of polylactide (PLA)/microfibrillated cellulose (MFC) composites prepared by: compression molding of wet-comingled MFC and PLA latex or powder, twin-screw extrusion of the wet-comingled compounds, and solvent mixing of PLA with MFC or acetylated MFC. Compression molding of wet-comingled MFC and PLA latex or powder compounds resulted in a cellular MFC network, whereas solvent-cast films showed a more uniform dispersion of MFC fibers. Somewhat lower aggregate diameters observed in the acetylated MFC were assumed to be due to decreased MFC hydrophilicity and improved chemical affinity with the PLA matrix. The MFC networks in the commingled compounds were severely disrupted after twin-screw extrusion. This confirmed the limited deformability of the networks inferred from the extensive syneresis during the initial compression molding step, and accounted for substantial losses in stiffness reinforcement by the MFC after extrusion.     

Iridium-Catalyzed Silylation of Five-Membered Heteroarenes: High Sterically Derived Selectivity from a Pyridyl-Imidazoline Ligand

The steric effects of substituents on five-membered rings are less pronounced than those on six-membered rings because of the difference in bond angles. Thus, the regioselectivities of reactions of five-membered heteroarenes that occur with selectivities dictated by steric effects, such as the borylation of C−H bonds, have been poor in many cases. We report that the silylation of five-membered-ring heteroarenes occurs with high sterically derived regioselectivity when catalyzed by the combination of [Ir(cod)(OMe)]₂ (cod=1,5-cyclooctadiene) and a phenanthroline ligand or a new pyridyl-imidazoline ligand that further increases the regioselectivity. The silylation reactions with these catalysts produce high yields of heteroarylsilanes from functionalization at the most sterically accessible C−H bonds of these rings under conditions that the borylation of C−H bonds with previously reported catalysts formed mixtures of products or products that are unstable. The heteroarylsilane products undergo cross-coupling reactions and substitution reactions with ipso selectivity to generate heteroarenes that bear halogen, aryl, and perfluoroalkyl substituents.     

Purification,Characterization, and Structural Studies of a Sulfatase from Pedobacter yulinensis

Sulfatases are ubiquitous enzymes that hydrolyze sulfate from sulfated organic substrates such as carbohydrates, steroids, and flavones. These enzymes can be exploited in the field of biotechnology to analyze sulfated metabolites in humans, such as steroids and drugs of abuse. Because genomic data far outstrip biochemical characterization, the analysis of sulfatases from published sequences can lead to the discovery of new and unique activities advantageous for biotechnological applications. We expressed and characterized a putative sulfatase (PyuS) from the bacterium Pedobacter yulinensis. PyuS contains the (C/S)XPXR sulfatase motif, where the Cys or Ser is post-translationally converted into a formylglycine residue (FGly). His-tagged PyuS was co-expressed in Escherichia coli with a formylglycine-generating enzyme (FGE) from Mycobacterium tuberculosis and purified. We obtained several crystal structures of PyuS, and the FGly modification was detected at the active site. The enzyme has sulfatase activity on aromatic sulfated substrates as well as phosphatase activity on some aromatic phosphates; however, PyuS did not have detectable activity on 17α-estradiol sulfate, cortisol 21-sulfate, or boldenone sulfate.     

Magnetic alignment in nominally non-magnetic hexagonal metal hydrides: NMR

Powders of three hexagonal metal-hydrides or -deuterides are found to align in 4.4–8.3 T magnetic fields used for NMR. The field-alignment is unexpected, since all three systems have very small susceptibilities, as demonstrated by sharp NMR lines. The extent of alignment runs from nearly complete to barely detectable in ZrBe₂(H,D)_x, LuD₃, and YD₃, respectively. The preferred alignment direction in ZrBe₂(H,D)_x is with the crystallites’ c-axis perpendicular to B, while the c-axis and B tend to be parallel in LuD₃ and YD₃. The susceptibilities χ_|| and χ are determined from bulk magnetization measurements in aligned ZrBe₂H_1.4 powder. The alignment must be considered for proper analysis of NMR spectra in these and related materials.