Ascorbic acid as a potential masking agent in the tanning process. Olated chromium complexes involving ligating ascorbate and bridging sulfate groups

Two polynuclear complexes, a dimer and a tetramer, involving sulfate and hydroxo bridges and ligating ascorbate were isolated from aqueous solutions. Structural formulae are proposed on the basis of microanalytical and thermal analysis results, i.r., ¹³C-n.m.r., mass spectral data and magnetic measurements.     

An improved method for the synthesis of cellulose membrane-bound peptides with free C termini is useful for PDZ domain binding studies

SPOT synthesis permits parallel synthesis and screening of thousands of cellulose membrane-bound peptides to study protein-protein interactions in a proteomic context. Recognition of C-terminal residues is one of the most common binding features of PDZ domains. Unfortunately, most solid support-bound peptide libraries lack a free C terminus due to C-terminal fixation on the solid support. To overcome this restriction, we developed a robust methodology based on our previous strategy for generating peptides with authentic C termini. To validate this improved method, we screened a human peptide library of 6223 C termini with the syntrophin PDZ domain. Furthermore, using the same library, new peptide ligands derived from membrane proteins and receptors were found for the ERBIN PDZ domain. Finally, we identified the protein kinase breakpoint cluster region, which is known as a negative regulator of cell proliferation and oncogenic transformation, as an ERBIN ligand.     

Selective spectrophotometric determination of TNT in soil and water with dicyclohexylamine extraction

Contaminated land and groundwater remediation in military waste dumping sites often necessitates the use of simple, cost-effective, and rapid tests for detecting trinitrotoluene (TNT) residues in the field along with their dinitro-analogues. A simple, rapid, low-cost, and field-adaptable (on-site) colorimetric method was developed for quantifying TNT in the presence of RDX, PETN, picric acid, 2,4-DNT (dinitrotoluene), dinitrophenol, and dinitroaniline. Most commercialized methods for TNT assay-with the exception of Cold Regions Research and Engineering Laboratory of the U.S. Army (CRREL) method-use proprietary chemicals, and the color stability and intensity are highly dependent on the composition of the organic solution comprised of acetone or methanol. The developed colorimetric method is based on the extraction of TNT from water-acetone solution into an organic solvent mixture of dicyclohexylamine (DCHA)-isobutyl methyl ketone (IBMK) (10:1, v/v), filtration through a filter paper into a stoppered optical cell containing anhydrous sodium sulfate, and measurement of the absorbance of the organic extract at 531 nm after 5 min. The red-violet color of the extract was due to intermolecular charge-transfer (CT) between the electron attracting TNT and electron-donating DCHA, and the molar absorptivity for TNT in final organic solution was (1.16 ± 0.02) × 10⁴ L mol⁻¹ cm⁻¹.The R.S.D. of the slope of calibration line was 0.7%. The LOD of the method in the final organic phase was 0.38 μM TNT, and LOD values expressed on the basis of original soil TNT content were 0.5, 1.3, and 1.5 ppm (μg g⁻¹) for clay, loamy clay, and sandy soils, respectively. Unlike other spectrophotometric methods, the developed assay was basically tolerant to common cations and anions found in soil and water at 100-fold weight ratios, and to soil humic acids. Among a number of compounds that may be encountered in polynitro-explosive storage and waste reclaimation sites such as picric acid, dinitrophenol, 2,4-dinitrotoluene, dinitroaniline, RDX, PETN, and tetryl, only tetryl interfered with the developed TNT assay. Water tolerance and exploitability over a wide pH range were other superiorities over the CRREL method. The CT-complex was relatively stable, as the absorbance of the organic extract was not significantly influenced from the dilution of the water-acetone phase. Aside from the extractive-photometric procedure established for aqueous solutions, a simulated field colorimetric assay for TNT directly applicable to soil was also devised, based on direct color development in a 4:1 (v/v) acetone-dicyclohexylamine organic extract of soil at a liquid-to-solid ratio of 5 mL g⁻¹.     

Metallophthalocyanines with rod-shaped substituents

4-(4′-Dioctylaminocarbonylbiphenyloxy) phthalonitrile was synthesized from 4-(4′-carboxybiphenyloxy)phthalonitrile and dioctylamine in the presence of Et₃N. Metallophthalocyanines (Zn, Co and Cu) substituted with four dioctylaminocarbonyl biphenyloxy groups on the peripheral positions were prepared from 4-(4′-dioctylaminocarbonylbiphenyloxy)phthalonitrile and the corresponding divalent metal salts (Zn(CH₃COO)₂, CoCl₂ and CuCl₂). The new phthalocyanines are soluble in common organic solvents. These compounds were characterised by ¹H-NMR, ¹³C-NMR, FT-IR, UV-Vis and mass spectroscopies.     

The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

Radioactivity measurements in epiphytic lichens of Uludağ Mountain in Western Anatolia

Activity concentrations of gross-β, naturally occurring ²²⁶Ra, ²³²Th, ²¹⁰Pb, ⁷Be and anthropogenic ¹³⁷Cs in epiphytic lichens collected from Uluda? Mountain are presented and discussed with the aim of evaluating potential usability of lichens as a biomonitor. The activity concentrations of gross-β, ¹³⁷Cs, ⁴⁰K, ²²⁶Ra, ²³²Th, ²¹⁰Pb and ⁷Be in the lichen samples were found to be in the range of 177–707, 4.05–94.26, 86–211, below detection limit (BDL)—19.2, BDL—14.0, 229–872, and 72.1–220.7 Bq kg^?1 in dry weight, respectively. ¹³⁷Cs content in collected epiphytic lichens was in descending order: Parmelia sulcata > Lobaria pulmonaria > Pseudevernia furfuracea > Usnea filipendula. The best biomonitor for ¹³⁷Cs among the lichen species used in this study was determined as Parmelia sulcata. Pearson’s correlation coefficient was calculated between ¹³⁷Cs and ⁴⁰K activity concentrations using a statistical package program (SPSS ver. 17.0) and a negative correlation value (R = ?0,323, p = 0,222) was obtained. The highest ²²⁶Ra and ²³²Th activity concentrations were found in Bo?azova Yaylas? which has a geological structure including granitic rocks. It was found that ¹³⁷Cs and ⁷Be activity concentrations in species demonstrated an inverse behaviour. The effect of mean annual precipitation and temperature on ⁷Be activity concentration was determined using multi regression analysis. Also, correlations between the ¹³⁷Cs and ⁷Be, and ⁴⁰K and ⁷Be were investigated.     

Preparation of a 99mTc-labeled graft polymer and its in vitro and in vivo evaluation

Journal of Radioanalytical and Nuclear Chemistry - The aim of this study is the synthesis of a novel 99mTc-labeld graft polymer and the biological evaluation of its in vitro and in vivo properties....     

Improvements of Tolerance to Stress Conditions by Genetic Engineering in Saccharomyces Cerevisiae during Ethanol Production

Saccharomyces cerevisiae, industrial yeast isolate, has been of great interest in recent years for fuel ethanol production. The ethanol yield and productivity depend on many inhibitory factors during the fermentation process such as temperature, ethanol, compounds released as the result of pretreatment procedures, and osmotic stress. An ideal strain should be able to grow under different stress conditions occurred at different fermentation steps. Development of tolerant yeast strains can be achieved by reprogramming pathways supporting the ethanol metabolism by regulating the energy balance and detoxicification processes. Complex gene interactions should be solved for an in-depth comprehension of the yeast stress tolerance mechanism. Genetic engineering as a powerful biotechnological tool is required to design new strategies for increasing the ethanol fermentation performance. Upregulation of stress tolerance genes by recombinant DNA technology can be a useful approach to overcome inhibitory situations. This review presents the application of several genetic engineering strategies to increase ethanol yield under different stress conditions including inhibitor tolerance, ethanol tolerance, thermotolerance, and osmotolerance.