Detection of autocatalytic decomposition behavior of energetic materials using APTAC

Characterization of autocatalytic decomposition reactions is important for the safe handling and storage of energetic materials. Isothermal differential scanning calorimetry (DSC) has been widely used to detect autocatalytic decomposition of energetic materials. However, isothermal DSC tests are time consuming and the choice of experimental temperature is crucial. This paper shows that an automatic pressure tracking calorimeter (APTAC) can be a reliable and efficient screening tool for the identification of autocatalytic decomposition behavior of energetic materials. Hydroxylamine nitrate (HAN) is an important member of the hydroxylamine family. High concentrations of HAN are used as liquid propellants, and low concentrations of HAN are used primarily in the nuclear industry for decontamination of equipment. Because of its instability and autocatalytic decomposition behavior, HAN has been involved in several incidents.     

Study of a Solvated Adsorbed Gelatin Layer Using a Modified Force Microscope

The interaction energies between gelatin-coated surfaces at various electrolyte and pH conditions are reported. The surfaces are of glass and are negatively charged under all conditions used here. Gelatin is a polyampholyte, with an isoelectric pH (IEP) of approximately 4.9. At low pH the gelatin molecules have a net positive charge, and thus the polyampholyte tends to adsorb with a relatively flat conformation. As the pH is increased the strong attractive interaction between the surface and the polyampholyte decreases as more negative charges and then fewer positive charges appear on the polyampholyte, and so the gelatin extends away from the surface. On changing electrolyte concentrations after adsorption no effect was seen at the IEP, but the layer was observed to swell at more alkaline pHs. This is consistent with the net minimum charge situation on the polymer under these conditions. Changing the adsorption conditions was seen to have an effect, and this is attributed to the different affinities of the gelatin chain to the surface depending on the solution chemistry. Results obtained when the gelatin was initially adsorbed on one surface or two were similar, suggesting that the gelatin transfers rapidly from one surface to another. The importance of adsorption conditions as well as current conditions is discussed. Copyright 1999 Academic Press.     

Moisture induced solid phase degradation of l-ascorbic acid part 2, separation and characterization of the major degradation products

The influence of moisture in the presence and absence of air on the solid state degradation of l-ascorbic acid has been investigated previously [1]. Reaction kinetics were studied using tristimulus colorimetry and a quantitative high performance liquid chromatographic assay for both total l-ascorbic acid and dehydroascorbic acid. The degradation gave rise to a discolouration of the samples, the most severely degraded samples were almost black in appearance although over 68% w/w of the l-ascorbic acid remained. The samples were analyzed for the presence of carbonyl compounds, furan related compounds, compounds responsible for the discolouration and evolution of carbon dioxide. No 2,4-dinitrophenylhydrazine (2,4-DNP) derivatives of carbonyl compounds or furan related compounds were detected by HPLC. An HPLC screening procedure was developed which was used to monitor for compounds responsible for the discolouration, at least eight unknown compounds were resolved and a relative response factor of 5.47 was assigned to them with respect to l-ascorbic acid at 280 nm. One mole of carbon dioxide was evolved per mole of l-ascorbic acid. This paper describes the investigation into the identity of the degradation products.     

Moisture induced solid phase degradation of l-ascorbic acid Part 1: a kinetic study using tristimulus colorimetry and a quantitative HPLC assay

l-Ascorbic acid was found to degrade in the solid phase with discoloration under the influence of moisture in proportion to the moisture content. This degradation pattern was different to that in solution and followed zero order kinetics. The exclusion of air reduced the rate of reaction suggesting the degradation may proceed via an oxidative route but no evidence was found for the presence of dehydroascorbic acid. A method was developed for the determination of dehydroascorbic acid using an automated precolumn reduction reaction with dl-dithiothreitol. The degradation was found to be zero order and activation energy was been measured at 37.57 kJ mol(-1) by high performance liquid chromotography (HPLC) assay and 33.30 kJ mol(-1) by tristimulus colorimetry, resulting in a 12.8% difference between the two methods. Tristimulus colorimetry was more sensitive to the onset of degradation than HPLC assay, but it is non-specific. The purpose of this study was to obtain kinetic data on the rate of degradation of l-ascorbic acid alone under the influence of moisture and air and to identify whether tristimulus colorimetry could be used as a rapid and non-destructive means of monitoring for the degradation of l-ascorbic acid in the solid phase. Further studies to determine the degradation pathway and to identify the degradation products are to be reported in subsequent papers.     

A novel method for the detection of plasma jet boundaries by exploring DNA damage

The coupled-channel optical method (CCOM) is implemented in this work to study the scattering of electron on rubidium atom at 20 eV. In order to provide a realistic calculation, the continuum effect of the scattering system is accounted by incorporate an ab initio optical potential into the CCOM calculation. The differential cross sections (DCS), as well as the reduced Stokes parameters of 5p excitation are reported and compared to the available experimental and theoretical data.     

Multistep processes in the (d,Li) reaction

At 28 MeV, the (d, ⁶Li) reaction on A = 4n targets in the 1p and 2s-1d shells systematically populates unnatural-parity states with large relative cross sections. This results suggests the presence of multistep reaction processes, making questionable the extraction of nuclear-structure information with DWBA.