Facile non‐lithographic route to highly aligned silica nanopatterns using unidirectionally aligned polystyrene‐block‐polydimethylsiloxane films

Thin films (monolayer and bilayer) of cylinder forming polystyrene‐block‐polydimethylsiloxane (PS‐b‐PDMS) were shear aligned by the swelling and deswelling of a crosslinked PDMS pad that was physically adhered to the film during solvent vapor annealing. The nanostructures formed by self‐assembly were exposed to ultraviolet‐ozone to partially oxidize the PDMS, followed by calcination in air at 500 °C. In this process, the PS segments were fully decomposed, while the PDMS yielded silica nanostructures. The highly aligned PDMS cylinders were thus deposited as silica nanolines on the silicon substrate. Using a bilayer film, the center‐to‐center distance of these features were effectively halved from 38 to 19 nm. Similarly, by sequential shear‐alignment of two distinct layers, a rhombic array of silica nanolines was fabricated. This methodology provides a facile route to fabricating complex topographically patterned nanostructures. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1058–1064     

Studies on pre-hump and main fractions of cellulose-2,5-acetate in acetone

Technical cellulose-2.5-acetates (CA 2.5) were characterized regarding their carbohydrate composition in comparison to the raw material. The association of the CA 2.5 samples in acetone was studied by size exclusion chromatography (SEC) using various acetone grades and styrene divinylbenzene copolymer columns. In HPLC grade acetone with and without addition of 1% water up to three different pre-humps eluted in front of the main fraction of the polymer. The evaluation of the main peak by light scattering measurements resulted in high molar masses indicating that for these technical CA 2.5 samples even the main fraction is not dissolved without association. No pre-humps or association phenomena were observed after addition of 1 ppm LiBr to HPLC grade acetone or with p.a. grade acetone. In addition pre-hump enriched and pre-hump free fractions were isolated by fractionated precipitation. The carbohydrate composition of these fractions was determined and correlated with their association pattern in SEC investigations.     

Morphological and elemental characterisation with the high-energy ion-nanoprobe LIPSION

This contribution deals with the morphological and elemental characterisation with high-energy (MeV) focused ion beams (in particular protons) with special emphasis on high spatial resolution in the sub-micrometer regime and very low minimum detection limits (sub-ppm) in trace element analysis. The most important methods like particle induced X-ray emission (PIXE), Rutherford backscattering spectrometry (RBS), as well as scanning transmission ion microscopy (STIM) and STIM-tomography will be illustrated by examples from material and life sciences.     

The fluorite-related anion-excess structure of CeN0.222O0.667F1.333: Ordering of defect clusters

This investigation presents the preparation of CeN_0.222O_0.667F_1.333 by a solid-state reaction from a mixture of CeN:CeF₃:CeO₂ = 1:2:1.5 and its structural investigation. The samples were annealed at 900°C in platinum tubes for different times. The basic structure found by powder neutron diffraction is anion-excess fluorite-related. The unit cell is an orthorhombic distortion of the cubic fluorite cell and has the space group Abm2. The lattice constants are a = 577.71(2) pm, B = 572.76(5) pm, and c = 573.32(6) pm. The structure refined by Rietveld analysis shows that [1:0:2]- defect clusters are present. In samples prepared by longer annealing times an ordering of these clusters to larger aggregates, i.e., toward the vernier phases, was observed. This was deduced from full profile analysis without refining a structural model by comparing the instrumental resolution curves of several models.     

Spin-resolved photoemission from epitaxial Au layers on Pt(111): Coverage dependence of the bandstructure and evidence of surface resonances

Au/Pt(111) has been studied by spin-, angle- and energy-resolved photoemission with normal incident circularly polarized synchrotron radiation of BESSY and normal photoelectron emission for different Au coverages. The prepared layers were characterized by LEED and Augerelectron spectroscopy and turned out to grow up two dimensional and epitaxially. In the photoemission experiments the development of the 3-dimensional bandstructure in the -direction could be observed. For a coverage of 2.6 layers the highest occupied spin-orbit split bands are located at about 0.6 eV lower binding energy than the corresponding bands for a 3D-Au crystal and show dispersion which is, however, weaker than in a 3D-Au crystal. A 5 layer Au adsorbate was found to have already the same dispersion and energetic location as a Au(111)-crystal. For thick gold layers, which behave in photoemission like Au(111)-crystals, we find structures that cannot be due to direct transitions into a free electron like final band. The coverage dependence and spin polarization of these structures show that some of them are due to surface resonances, while the origin of one strong peak could not yet be explained conclusively. In addition we find strong hybridization and two avoided crossings in the occupied part of the bandstructure.