Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

A heterogeneous model for gas transport in carbon molecular sieves

A dual resistance model with distribution of either barrier or pore diffusional activation energy is proposed in this work for gas transport in carbon molecular sieve (CMS) micropores. This is a novel approach in which the equilibrium is homogeneous, but the kinetics is heterogeneous. The model seems to provide a possible explanation for the concentration dependence of the thermodynamically corrected barrier and pore diffusion coefficients observed in previous studies from this laboratory on gas diffusion in CMS. The energy distribution is assumed to follow the gamma distribution function. It is shown that the energy distribution model can fully capture the behavior described by the empirical model established in earlier studies to account for the concentration dependence of thermodynamically corrected barrier and pore diffusion coefficients. A methodology is proposed for extracting energy distribution parameters, and it is further shown that the extracted energy distribution parameters can effectively predict integral uptake and column breakthrough profiles over a wide range of operating pressures.     

The process\pi ^0 \to \lambda _\gamma \bar \lambda _\gamma as an alternative to\pi ^0 \to v\bar v

The process \(\pi ^0 \to \lambda _\gamma \bar \lambda _\gamma \) is investigated as an alternative to \(\pi ^0 \to v\bar v\) . It is shown that the experimental bound on the branching fraction for missing energy (in the form of \(\lambda _\gamma \bar \lambda _\gamma \) and/or \(v\bar v\) ) may be understood in terms of \(\pi ^0 \to \lambda _\gamma \bar \lambda _\gamma \) for the kinematically allowed photino mass, if the squark mass is >8 GeV.     

Control of olefin geometry in the bryostatin B-ring through exploitation of a C(2)-symmetry breaking tactic and a Smith-Tietze coupling reaction

A completely stereocontrolled asymmetric synthesis of an advanced B-ring synthon for the bryostatin family of antitumor agents is reported. Noteworthy features of our synthesis include the Smith-Tietze bis-alkylation reaction between 12 and 13 en route to C(2)-symmetrical ketone 10 and the totally stereoselective conversion of 10 into triol 18 via a Grignard addition tactic. Triol 18 was converted to epoxide 3 in nine steps, and an acid-catalyzed intramolecular Williamson etherification reaction completed the synthesis of 2.     

Study of hexane adsorption in nanoporous MCM-41 silica

We study here the adsorption of hexane on nanoporous MCM-41 silica at 303,313, and 323 K, for various pore diameters between 2.40 and 4.24 nm. Adsorption equilibria, measured thermogravimetrically, show that all the isotherms, that are somewhat akin to those of type V, exhibit remarkably sharp capillary adsorption phase transition steps and are reversible. The position of the phase transition step gradually shifts from low to high relative pressure with an increase in the temperature as well as the pore sizes. The isosteric heats of adsorption derived from the equilibrium information using the Clapeyron equation reveal a gradual decrease with increasing adsorbed amount because of the surface heterogeneity but approach a constant value near the phase transition. A decrease in the pore size results in an increase in the isosteric heat of adsorption because of the increased dispersion forces. A simple strategy, based on the Broekhoff and De Boer adsorption theory, successfully interprets the hexane adsorption isotherms for the different pore size MCM-41 samples. The parameters of an empirical expression, used to represent the potential of interaction between the adsorbate and adsorbent, are obtained by fitting the monolayer region prior to capillary condensation and the experimental phase transition simultaneously, for some pore sizes. Subsequently, the parameters are used to predict the adsorption isotherm on other pore size samples, which showed good agreement with experimental data.     

Organophosphorus reagents as extractants-part 3. Synergic effect of triphenyl phosphine oxide and bis(diphenyl phosphinyl) alkanes on extraction of iron(III) from thiocyanate medium with 2,4-pentdione

The extraction of iron(III) from thiocyanate medium was carried out with a synergic combination of 2,4-pentdione (Hacac) and either triphenyl phosphine oxide (Ph(3) PO) or bis (diphenylphosphinyl) alkanes, Ph(2)P(O)(CH(2))(n).P(O)PH(2) [ligand abbreviation, n: dpeO(2), 2; dpbO(2), 4]. Iron(III) was quantitatively separated from its binary mixture with chromium(III), manganese(III), cobalt(II), nickel(II), zinc(II), cadmium(II), mercury(II), lead(II), magnesium(II) and from steel samples. Copper(II) and silver(I) however, interfered. The percentage extraction was 99.0%. The respective extraction constants, K(HA), K(L) or K(syn), for the extracted species, [Fe(NCS)(acac)(2)(H(2)O)] (HA Hacac), Fe(NCS)(3)L(2) [L b Ph(3)PO, dpeO(2) or dpbO(2)], or Fe(NCS)(acac)(2)L were found to be: K(HA), 1.48 x 10(3), K(L), 1.80 x 10(2) (L Ph(3)PO), 2.02 x 10(2) (L dpeO(2) or dpbO(2)) and K(syn), 1.87 x 10(6) (L Ph(3)PO), 2.56 x 10(6) [L dpeO(2) or dpbO(2)].