INFLUENCE OF A LEVELNESS DEFECT IN A THRUST BEARING ON THE DYNAMIC BEHAVIOUR OF AN ELASTIC SHAFT

This paper examines the non-linear dynamic behaviour of a flexible shaft. The shaft is mounted on two journal bearings and the axial load is supported by a defective hydrodynamic thrust bearing at one end. The defect is a levelness defect of the rotor. The thrust bearing behaviour must be considered to be non-linear because of the effects of the defect. The shaft is modelled with typical beam finite elements including effects such as the gyroscopic effects. A modal technique is used to reduce the number of degrees of freedom. Results show that the thrust bearing defects introduce supplementary critical speeds. The linear approach is unable to show the supplementary critical speeds which are obtained only by using non-linear analysis.     

Global Analysis of the Flows of Fluids with Pressure-Dependent Viscosities

 To describe the flows of fluids over a wide range of pressures, it is necessary to take into account the fact that the viscosity of the fluid depends on the pressure. That the viscosity depends on the pressure has been verified by numerous careful experiments. While the existence of solutions local-in-time to the equations governing the flows of such fluids are available for small, special data and rather unrealistic dependence of the viscosity on the pressure, no global existence results are in place. Our interest here is to establish the existence of weak solutions for spatially periodic three-dimensional flows that are global in time, for a large class of physically meaningful viscosity-pressure relationships. (Accepted May 1, 2002) Published online November 15, 2002 Communicated by S. S. ANTMAN     

Immunoaffinity isolation of CEACAM1 on hydrazide-derivatized cellulose with immobilized monoclonal anti-CEA antibody

Carcinoembryonic cell adhesion molecule 1 (CEACAM1) is a human membrane glycoprotein belonging to the carcinoembryonic antigen (CEA) family and to the immunoglobulin superfamily. It is expressed in apical membranes of many epithelial cells in gastrointestinal and urogenital tract and also in granulocytes and lymphocytes, and its biological effect in human tissues has recently been discussed in literature. The purpose of this study was to isolate CEACAM1 glycoprotein from bile and characterize its purity and recovery which has not been described before. Affinity chromatography of CEACAM1 on hydrazide-activated cellulose with immobilized monoclonal anti-CEA F34-187 antibody is described. The immunoglobulin carbohydrate moiety was oxidized by periodate and then bound to hydrazide-activated matrix. Crude protein fraction from bile was applied on the affinity column and after extensive washing of non-bound proteins CEACAM1 was eluted with 6 M guanidine-HCl. A single immunopositive 85 kDa band was detected on Western blots with anti-CEA antibody after SDS-PAGE. We found out that CEACAM1 was not stainable with any common method of protein staining and the only non-specific method which could detect the 85 kDa band was a lectin staining.     

Affinity chromatography of porcine pepsin A using quinolin-8-ol as ligand

Stationary phase containing quinolin-8-ol immobilized on macroporous methacrylate support for the affinity chromatography of porcine pepsin A is described. Optimized chromatographic conditions for separation of porcine pepsin A on this stationary phase were found investigating the influence of pH, concentration, ionic strength and chemical composition of the used mobile phases. The stationary phase shows a good reproducibility of chromatographic analyses (relative standard deviation, +/-2%), a high recovery (ca. 93%) and a satisfactory capacity (13 mg pepsin A/1 mL stationary phase) for porcine pepsin A. The obtained findings confirm the applicability of affinity chromatography on the stationary phase with immobilized quinolin-8-ol to the isolation and determination of porcine pepsin A.     

Viability of yeast cells in well controlled propagating and standing ultrasonic plane waves

Recent studies have shown that there is no loss of cell viability when the cells are subjected to ultrasonic standing wave fields in acoustic cell retention systems. These systems are characterised by waves that spatially vary in pressure amplitude in the direction of sound propagation. In this work an anechoic 'one-dimensional' sonication chamber has been developed that produces propagating waves, which differ from standing waves in that the pressure amplitude remains constant as the wave travels in a medium with negligible attenuation. The viability of yeast cell suspensions as a function of treatment time was investigated during exposure to both standing and propagating wave fields with frequencies slightly above 2 MHz. The influence of 12% (vol/vol) of ethanol in water on the spatial arrangement of the cells in suspension was also studied. Changes in yeast cell morphology caused by the different types of suspension media and the ultrasonic treatment were examined by transmission electron microscopy (TEM). The agglomeration of yeast cells within the pressure nodal planes appears to minimise damaging effects due to ultrasonic fields.     

Importance of acoustic shielding in sonochemistry

It is well known that sonochemistry is less efficient at high acoustic intensities. Many authors have attributed this effect to decoupling losses and shielding of the acoustic wave. In this study we investigate both phenomena for a 20 kHz ultrasound field with an intensity ranging from 40 to 150 W/cm2. Visualization of the bubble cloud has demonstrated that the void fraction below the ultrasound horn increases more than proportional with increasing power input. Nevertheless, the energy coupling between the horn and the liquid remains constant; this implies that decoupling losses are not reinforced for larger bubble clouds. On the contrary, microphone measurements have shown that due to the larger bubble cloud a substantial part of the supplied energy is lost at high power inputs. In striving towards more efficient sonochemistry, reduction of shielding appears as one of the major challenges.     

Mathematical and Numerical Study of the 3D Atmospheric Boundary Layer Flows Including Pollution Dispersion

The paper presents a mathematical and numerical investigation of the atmospheric boundary layer (ABL) flow over 3D complex terrain part of which is represented by the real topography of the Krkonose mountains located in the Czech Republic. The flow is supposed to be turbulent, non‐stratified, viscous, incompressible and stationary. Two mathematical models have been formulated. The first model is based upon the RANS equations in the conservative form and the second one uses the Boussinesq approximation of RANS equations and takes the non‐conservative form. Also pollution dispersion over the complex 3D terrain has been considered in both models. The problem closure is achieved by an algebraic turbulence model and given boundary conditions.     

Functionalized magnetic micro- and nanoparticles: optimization and application to micro-chip tryptic digestion

The preparation of an easily replaceable protease microreactor for micro-chip application is described. Magnetic particles coated with poly(N-isopropylacrylamide), polystyrene, poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate), poly(glycidyl methacrylate), [(2-amino-ethyl)hydroxymethylen]biphosphonic acid, or alginic acid with immobilized trypsin were utilized for heterogeneous digestion. The properties were optimized, with the constraint of allowing immobilization in a microchannel by a magnetic field gradient. To obtain the highest digestion efficiency, sub-micrometer spheres were organized by an inhomogeneous external magnetic field perpendicularly to the direction of the channel. Kinetic parameters of the enzyme reactor immobilized in micro-chip capillary (micro-chip immobilized magnetic enzyme reactor (IMER)) were determined. The capability of the proteolytic reactor was demonstrated by five model (glyco)proteins ranging in molecular mass from 4.3 to 150 kDa. Digestion efficiency of proteins in various conformations was investigated using SDS-PAGE, HPCE, RP-HPLC, and MS. The compatibility of the micro-chip IMER system with total and limited proteolysis of high-molecular-weight (glyco)proteins was confirmed. It opens the route to automated, high-throughput proteomic micro-chip devices.