微调镝(Ⅲ)离子配位环境提升单离子磁体有效能垒

对于合成化学家来说,通过合成策略调控单离子磁体的磁动力学是一项艰巨的任务。我们以三（2-羟基亚苄基）三氨基胍配体（L）合成了2例单核Dy（Ⅲ）配合物[Dy（L）₂（H₂O）₂]ClO₄·2H₂O·2CH₃CN·CH₃OH（1）和[Dy（L）₂（H₂O）₂]CF₃SO₃·4H₂O·2CH₃OH（2）。对其结构和磁性研究表明,不同的抗衡阴离子对于配合物1和2的动态磁行为有显著影响。2个配合物中,Dy（Ⅲ）中心都具有三角形十二面体D_2d对称性,在零直流场下表现出单离子磁体的行为,其有效能垒分别为358 K（1）和309 K（2）。结构参数对比表明轴向位置的键长和键角微小变化对轴向配体场产生了显著的影响,而轴向配体场的微小变化导致了2个配合物交流磁性的差异。     

On the line graph of the complete tripartite graph

It is shown that the line graph of the complete tripartite graphK_n,n,n is characterized by the spectrum of its adjacency matrix.     

Micromechanical and thermal behaviour of gel grown pure- and sodium-modified copper tartrate crystals

Results regarding micromechanical characteristics of gel grown pure- and sodium-modified copper tartrate crystals, bearing composition CuC₄H₄O₆·3H₂O, (Cu)_0.77(Na)_0.23C₄H₄O₆·3H₂O and (Cu)_0.65(Na)_0.35C₄H₄O₆·H₂O, as obtained on using indentation induced hardness testing technique are reported. Thermal behaviour of these crystals in the temperature ranging from room temperature (∼25 °C) to about 600 °C is also reported. Pure copper tartrate crystals are found to be thermally more stable than the sodium-modified ones. Dependence of Vickers’ hardness number H_v on load ranging from 0.049 to 2.94 N on two different planes for all the three compositions is analyzed. It is shown that after initial rise in the value of H_v, the same achieves saturation at a load of 0.49 N. Modification of copper tartrate crystal by introducing sodium in its lattice brings about a change in the micromechanical characteristics. The saturation value of H_v decreases with increase in the concentration of sodium ions. The results on (0 0 1) and (1 1 1) planes for both pure and modified copper tartrate crystals suggest hardness anisotropy. Relative difference of hardness between the two planes and yield strength for both pure and modified copper tartrate crystals is worked out. The experimental results are analyzed for applicability of Meyer’s law and Proportional Specimen Resistance Model. It is suggested that the experimental results indicating reverse ISE phenomenon may be explained in terms of the existence of a distorted zone near the crystal-medium interface. The integral method of Coats and Redfern approximation applied to the thermoanalytical data suggests “Random Nucleation Model” for the reaction kinetics of these crystals. Non-isothermal kinetic parameters such as activation energy, frequency factor and order of reaction are calculated.     

Psychrotolerant Mesorhizobium sp. Isolated from Temperate and Cold Desert Regions Solubilizes Potassium and Produces Multiple Plant Growth Promoting Metabolites

Soil potassium (K) supplement depends intensively on the application of chemical fertilizers, which have substantial harmful environmental effects. However, some bacteria can act as inoculants by converting unavailable and insoluble K forms into plant-accessible forms. Such bacteria are an eco-friendly approach for enhancing plant K absorption and consequently reducing utilization of chemical fertilization. Therefore, the present research was undertaken to isolate, screen, and characterize the K solubilizing bacteria (KSB) from the rhizosphere soils of northern India. Overall, 110 strains were isolated, but only 13 isolates showed significant K solubilizing ability by forming a halo zone on solid media. They were further screened for K solubilizing activity at 0 °C, 1 °C, 3 °C, 5 °C, 7 °C, 15 °C, and 20 °C for 5, 10, and 20 days. All the bacterial isolates showed mineral K solubilization activity at these different temperatures. However, the content of K solubilization increased with the upsurge in temperature and period of incubation. The isolate KSB (Grz) showed the highest K solubilization index of 462.28% after 48 h of incubation at 20 °C. The maximum of 23.38 µg K/mL broth was solubilized by the isolate KSB (Grz) at 20 °C after 20 days of incubation. Based on morphological, biochemical, and molecular characterization (through the 16S rDNA approach), the isolate KSB (Grz) was identified as Mesorhizobium sp. The majority of the strains produced HCN and ammonia. The maximum indole acetic acid (IAA) (31.54 µM/mL) and cellulase (390 µM/mL) were produced by the isolate KSB (Grz). In contrast, the highest protease (525.12 µM/mL) and chitinase (5.20 µM/mL) activities were shown by standard strain Bacillus mucilaginosus and KSB (Gmr) isolate, respectively.     

Liquid chromatography–mass spectrometry based global metabolite profiling: A review

Untargeted, global metabolite profiling (often described as metabonomics or metabolomics) represents an expanding research topic and is, potentially, a major pillar for systems biology studies. To obtain holistic metabolic profiles from complex samples, such as biological fluids or tissue extracts, requires powerful, high resolution and information-rich analytical methods and for this spectroscopic technologies are generally used. Mass spectrometry, coupled to liquid chromatography (LC–MS), is increasingly being used for such investigations as a result of the significant advances in both technologies over the past decade. Here we try to critically review the topic of LC–MS-based global metabolic profiling and describe and compare the results offered by different analytical strategies and technologies. This review highlights the current challenges, limitations and opportunities of the current methodology.     

Crystal Structure Analysis of 1-Hydroxy-3,5-dimethoxy-9H-xanthen-9-one Isolated from Ajuga bracteosa Root Extract and Its Biological Studies

The structure of 1-hydroxy-3,5-dimethoxy-9 H-xanthen-9-one isolated from chloroform extract of Ajuga bracteosa root was analyzed by single-crystal X-ray diffraction. DPPH(1,1-diphenyl-2-picryl hydrazyl), ABTS(2,2?-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activities(RSA) and Fe2+ chelating activities were carried out to determine the antioxidant potential of the compound. RSA values for the compound were 96%, 96% and 96% for all the three activities respectively at maximum concentration of the compound(100 μ gmL-1) with the IC50 values of 3.40, 4.86 and 0.10(μ gmL-1). Antidiabetic activities including antiglycation and α-glucosidase inhibition were also performed where the antiglycation activity was performed using two techniques including spectrofluorometric as well as spectrophotometric technique. Spectrofluorometric technique provided 97% antiglycation potential while 92% antiglycation potential was observed by spectrophotometric technique for the isolated compound. The compound at a concentration of 10 μ gmL-1 exhibited 31% α-glucosidase inhibitory potential with IC50 of 15.56 μ gmL-1. Antimicrobial activity data showed that the compound was active against all the studied pathogenic bacteria.     

Biocompatible fluorescent polyamine‐based cyclophosphazene hybrid nanospheres for targeted cell imaging

Fluorescent nanoprobes are highly desirable toolkit for bioimaging applications. This study reports the first example for the synthesis of a nontoxic prototypical fluorescent organic compound 2‐benzo[d]thiazol‐2‐yl)‐3‐(2‐chloro‐4‐(dimethylamino)phenyl)acrylonitrile (BCA) and its entrapment into the poly[cyclotriphosphazene‐co‐polyethyleneimine] cross‐linked (PCPEI) nanospheres named as BCA@PCPEI for targeted cell imaging application. The as‐prepared BCA@PCPEI nanospheres were thoroughly characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and phosphorus‐31 nuclear magnetic resonance (³¹P‐NMR) analyses. The surface functional analysis of the nanospheres was performed by X‐ray photoelectron spectroscopy (XPS), which proves that the content ratios of elements belong to the precursors concentrations. The as‐prepared nanospheres displayed emission at 606 nm with bright orange fluorescence at any concentration. Moreover, the nanospheres were also less cytotoxic and maintained remarkable cell viability up to 100 μg/mL. Owing to the fluorescence with higher emission, this material has shown excellent cell imaging performance with better targeting ability to HeLa cells.     

Emulation and subshifts of finite type in cellular automata

The dynamics of the class of nearest-neighbour automata on binary sequence space ₂ is studied. The surjective mappings are identified and these are all strongly mixing, except for the identity and parity maps. Those automata which act like (emulate) either the identity, shift or inverse shift maps are identified, and the shift emulators are shown to be subshifts of finite type on their limits sets.     

Gallium oxide thin films from the AACVD of [Ga(NMe2)3]2 and donor functionalised alcohols

Thin films of Ga(2)O(3) have been produced from [Ga(NMe(2))(3)](2) and ROH (R = CH(2)CH(2)NMe(2), CH(CH(2)NMe(2))(2), CH(CH(3))CH(2)NMe(2), CH(2)CH(2)OMe and C(CH(3))(2)CH(2)OMe) by aerosol assisted chemical vapour deposition on glass. Transparent, unreflective films were obtained at a deposition temperature of 550 degrees C using toluene as solvent. The gallium oxide films were analyzed by Scanning electron microscopy (SEM), Raman spectroscopy, wavelength dispersive analysis of X-rays (WDX) and X-ray photoelectron spectroscopy (XPS). The gallium oxide films obtained were X-ray amorphous. Gas-sensing experiments indicated that the films showed an n-type response to ethanol at a variety of temperatures.     

Aerosol assisted chemical vapor deposition of In2O3 films from Me3In and donor functionalized alcohols

The reaction of Me3In and ROH (R = CH2CH2NMe2, CH(CH3)CH2NMe2, C(CH3)2CH2OMe, CH2CH2OMe) in toluene under aerosol assisted chemical vapor deposition (AACVD) conditions leads to the production of indium oxide thin films on glass. The indium oxide films were deposited at 550 degrees C and analyzed by scanning electron microscopy (SEM), X-ray powder diffraction, wavelength dispersive analysis of X-rays (WDX), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. This CVD technique offers a rapid, convenient route to In2O3, which presumably involves the in situ formation of dimethylindium alkoxides, of the type [Me2InOR]2. In order to identify compounds present in the aerosol mist, the solution-phase reaction between Me3In and ROH (R = CH2CH2NMe2, C(CH3)2CH2OMe, CH(CH3)CH2NMe2, CH(CH2NMe2)2) at room temperature in toluene was carried out. Dimeric indium alkoxides, of the type [Me2In(OR)]2, were isolated, and their structures were determined by X-ray crystallography.