Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

A facile synthesis of oxazines by indium-induced reduction-rearrangement of the nitro β-lactams

An indium-induced reduction-rearrangement reaction of nitro-substituted β-lactams has been used for facile synthesis of oxazines in aqueous ethanol.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Microchemical characterization of paintings — A case study

Summary The fundamental importance of scientific research for the preservation and restoration of works of art is uncontestable. The methods described in this paper, such as light microscopy, microchemical tests, emission spectroscopy, chromatography, scanning electron analysis, electron microprobe analysis and infrared spectroscopy, are of special significance in this filed. Nevertheless a better understanding of the problems that arise out of new special questions of art history can be obtained only by the right interpretation of the data obtained by scientific methods.

---

Mikrochemische Charakterisierung von Gemälden

Zusammenfassung Die grundlegende Bedeutung wissenschaftlicher Forschung für die Erhaltung und Restaurierung von Kunstwerken ist unbestritten. Die hier beschriebenen Methoden (Lichtmikroskopie, mikrochemische Reaktionen, Emissionsspektroskopie, Chromatographie, Rasterelektronen-Analyse und Infrarotspektroskopie) sind hierfür von zunehmender Bedeutung. Sie ermöglichen ein besseres Verständnis neuerer kunsthistorischer Probleme nur durch die richtige Interpretation der Ergebnisse wissenschaftlicher Methoden.

     

On the underestimated influence of synthetic conditions in solid ionic conductors

The development of high-performance inorganic solid electrolytes is central to achieving high-energy- density solid-state batteries. Whereas these solid-state materials are often prepared via classic solid-state syntheses, recent efforts in the community have shown that mechanochemical reactions, solution syntheses, microwave syntheses, and various post-synthetic heat treatment routines can drastically affect the structure and microstructure, and with it, the transport properties of the materials. On the one hand, these are important considerations for the upscaling of a materials processing route for industrial applications and industrial production. On the other hand, it shows that the influence of the different syntheses on the materials'' properties is neither well understood fundamentally nor broadly internalized well. Here we aim to review the recent efforts on understanding the influence of the synthetic procedure on the synthesis – (micro)structure – transport correlations in superionic conductors. Our aim is to provide the field of solid-state research a direction for future efforts to better understand current materials properties based on synthetic routes, rather than having an overly simplistic idea of any given composition having an intrinsic conductivity. We hope this review will shed light on the underestimated influence of synthesis on the transport properties of solid electrolytes toward the design of syntheses of future solid electrolytes and help guide industrial efforts of known materials.

Influence of synthesis and processing on the nature of ultimate product and the ionic transport properties of superionic conductors.     

Mimicking transition metals in borrowing hydrogen from alcohols

Borrowing hydrogen from alcohols, storing it on a catalyst and subsequent transfer of the hydrogen from the catalyst to an in situ generated imine is the hallmark of a transition metal mediated catalytic N-alkylation of amines. However, such a borrowing hydrogen mechanism with a transition metal free catalytic system which stores hydrogen molecules in the catalyst backbone is yet to be established. Herein, we demonstrate that a phenalenyl ligand can imitate the role of transition metals in storing and transferring hydrogen molecules leading to borrowing hydrogen mediated alkylation of anilines by alcohols including a wide range of substrate scope. A close inspection of the mechanistic pathway by characterizing several intermediates through various spectroscopic techniques, deuterium labelling experiments, and DFT study concluded that the phenalenyl radical based backbone sequentially adds H⁺, H˙ and an electron through a dearomatization process which are subsequently used as reducing equivalents to the C–N double bond in a catalytic fashion.

An efficient method is developed for harvesting hydrogen, its storage and catalytic transfer by an odd alternant hydrocarbon. The strategy is reminiscent of transition metals in borrowing hydrogen mediated processes.     

Effect of environmental factors and carbohydrate on gellan gum production

Submerged culture fermentation studies were carried out in batch mode for optimizing the environmental parameters and carbon source requirement by Pseudomonas elodea for the production of gellan gum. The maximum production of gellan gum was obtained with 16-h-old culture and 8% inoculum at 30°C and pH 7.0 after 52 h of incubation (6.0 g/L). Of the various carbon sources tested, 2% sucrose, glucose, and soluble starch yielded considerably high amounts of gellan. Studies on the concentration of various carbohydrates on gellan gum production indicated that the optimum concentration of glucose and starch was 3%, whereas for sucrose it was 4%. The addition of glucose in the medium above 3% had a detrimental effect on gellan yield. The investigation of intermediate two-step addition of glucose under identical conditions of fermentation showed an enhanced production of gellan (8.12 g/L) as compared with the control (6.0 g/L). To optimize the recovery of gellan from fermented broth, different solvents were tested for precipitation of gellan gum. Among the various solvents tested, tetrahydrofuran gave better recovery of gellan (82%) as compared with the conventional solvent isopropanol (49%).     

Microwave-induced organic reaction enhancement (more) chemistry: Techniques for rapid,safe and inexpensive synthesis

Synthetic organic reactions have been conducted under microwave irradiation in open vessels in unaltered domestic microwave ovens. Reaction times vary from a few seconds for sub-milligram reactions to about 15 minutes for reactions carried out on a scale of hundreds of grams. Promising results have been obtained for several condensations, as well as the Bischler-Napieralski reaction, the Wolff-Kishner reduction, free radical dehalogenation reactions, and other standard synthetic operations. Rapid catalytic transfer hydrogenation using ammonium formate as the source of hydrogen has been conducted at about 100-130 °C under microwave irradiation. Meaningful, safe and inexpensive synthetic experiments for undergraduate and pre-college students have been developed and tested. The MORE chemistry techniques make it possible to use simple apparatus and very short reaction times. Commercial microwave ovens are now essential equipment in our research and teaching laboratories [1-3]. These ovens are relatively inexpensive, easy to move from one laboratory and set up in another, and safe to operate. Glass, plastics, and ceramics are essentially transparent to microwaves whereas many organic compounds are dipolar in nature and absorb microwave energy readily. We have found that untraditional experimental arrangements are possible for conducting a wide variety of organic reactions in open vessels inside domestic microwave ovens. Depending on the quantity of reactants, most reactions (on a scale of milligrams to several grams) can be completed in minutes instead of hours. One important element of our “Microwave-induced Organic Reaction Enhancement” (MORE) chemistry is the proper choice of a microwave energy transfer agent as the reaction medium.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

A model validation and consensus building environment

Over half of the failures in drug development are due to problems with the absorption, distribution, metabolism, excretion, and toxicity, or ADME/Tox properties of a candidate compound. The utilization of in silico tools to predict ADME/Tox and physicochemical properties holds great potential for reducing the attrition rate in drug research and development, as this technology can prioritize candidate compounds in the pharmaceutical R&D pipeline. However, a major concern surrounding the use of in silico ADME/Tox technology is the reliability of the property predictions. Bio-Rad Laboratories, Inc. has created a computational environment that addresses these concerns. This environment is referred to as KnowItAll®. Within this platform are encoded a number of ADME/Tox predictors, the ability to validate these predictors with/without in-house data and models, as well as build a ‘consensus’ model that may be a much better model than any of the individual predictive model. The KnowItAll® system can handle two types of predictions: real number and categorical classification.