Some hydrodynamic aspects of 3-phase inverse fluidized bed

Hydrodynamics of 3-phase inverse fluidized bed is studied experimentally using low density particles for different liquid and gas velocities. The hydrodynamic characteristics studied include pressure drop, minimum liquid and gas fluidization velocities and phase holdups. The minimum liquid fluidization velocity determined using the bed pressure gradient, decreases with increase in gas velocity. The axial profiles of phase holdups shows that the liquid holdup increases along the bed height, whereas the solid holdup decreases down the bed. However, the gas holdup is almost uniform in the bed.     

Multiparameter Polynomial Adaptive Stabilizers

In 1983 Morse proved, for unknown scalar one-dimensional linearsystems, the nonexistence of rational or polynomial universalstabilizers (UAS). In 1983, Nussbaum gave an example of an analyticUAS. In our paper, it is shown that there exist time-invariantpolynomial UAS's with multidimensional gain adaptation. Thedesign procedure is developed for linear, minimum-phase systemsof relative degree one. Convergence of the closed-loop systemis proved. Some numerical simulations are provided.     

Synthesis and Langmuir studies of bivalent and monovalent alpha-D-mannopyranosides with lectin Con A

Highly avid interaction between carbohydrate ligands and lectin receptors nominally requires the ligand presentation in a clustered form. We present herein an approach involving Langmuir monolayer formation of the sugar ligands and the assessment of their lectin binding at the air-water interface. Bivalent alpha-D-mannopyranoside containing the glycolipid ligand was used to study its binding profiles with lectin Con A, in comparison to the corresponding monovalent glycolipid. In addition to the bivalent and monovalent nature of the glycolipid ligands at the molecular level, the ligand densities at the monolayer level were varied with the aid of a nonsugar lipid molecule so as to obtain mixed monolayers with various sugar-nonsugar ratios. Lectin binding of bivalent and monovalent ligands at different ratios was monitored by differential changes in the surface area per molecule of the mixed monolayer, with and without the lectin. The present study shows that maximal binding of the lectin to the bivalent ligand occurs at lower sugar densities at the interface ( approximately 10% sugar in the mixed monolayer) than for that of the monovalent ligand ( approximately 20% sugar in the mixed monolayer). It is observed that complete coverage of the monolayer with only the sugar ligands does not allow all of the sugars to be functionally active.     

A Simple and Convenient Method for the Deprotection of Tetrahydropyranyl Ether Using Iodine in Methanol

A simple and efficient method for the -deprotection of tetrahydropyranyl and 4,4′-dimethoxytrityl ethers using iodine in methanol is described.     

Towards the design of novel boron‐ and nitrogen‐substituted ammonia‐borane and bifunctional arene ruthenium catalysts for hydrogen storage

Electronic‐structure density functional theory calculations have been performed to construct the potential energy surface for H₂ release from ammonia‐borane, with a novel bifunctional cationic ruthenium catalyst based on the sterically bulky β‐diketiminato ligand (Schreiber et al., ACS Catal. 2012, 2, 2505). The focus is on identifying both a suitable substitution pattern for ammonia‐borane optimized for chemical hydrogen storage and allowing for low‐energy dehydrogenation. The interaction of ammonia‐borane, and related substituted ammonia‐boranes, with a bifunctional η⁶‐arene ruthenium catalyst and associated variants is investigated for dehydrogenation. Interestingly, in a number of cases, hydride‐proton transfer from the substituted ammonia‐borane to the catalyst undergoes a barrier‐less process in the gas phase, with rapid formation of hydrogenated catalyst in the gas phase. Amongst the catalysts considered, N,N‐difluoro ammonia‐borane and N‐phenyl ammonia‐borane systems resulted in negative activation energy barriers. However, these types of ammonia‐boranes are inherently thermodynamically unstable and undergo barrierless decay in the gas phase. Apart from N,N‐difluoro ammonia‐borane, the interaction between different types of catalyst and ammonia borane was modeled in the solvent phase, revealing free‐energy barriers slightly higher than those in the gas phase. Amongst the various potential candidate Ru‐complexes screened, few are found to differ in terms of efficiency for the dehydrogenation (rate‐limiting) step. To model dehydrogenation more accurately, a selection of explicit protic solvent molecules was considered, with the goal of lowering energy barriers for H‐H recombination. It was found that primary (1°), 2°, and 3° alcohols are the most suitable to enhance reaction rate. © 2014 Wiley Periodicals, Inc.     

A new ent-labdane eiterpenoid lactone from Andrographis paniculata

A new ent-labdane diterpenoid lactone with a new natural product was isolated from Andrographis paniculata. Their structures were elucidated on the basis of spectral evidences including 2D NMR.     

Asymmetric synthesis of pedamide using I_2-induced heterocyclization to construct the skeleton

An alternative approach to synthesize pedamide,a key building block of pederin was described.Iodine-induced asymmetric heterocyclization was used as the key step to construct the skeleton,a tetrahydropyran ring with three chiral centers.Brown's asymmetric allylation and Lewis acid-mediated allylation were investigated to introduce chains and chiral alcohols.Sharpless dihydroxylation decorated the side chain.And high optically pure target was obtained by removing the epimers formed in these reactions on c...     

Microwave-assisted one-pot synthesis of 3-substituted-3,4-dihydrocoumarins via tendem Konevenagel and Hantzsch reactions

A convenient route for the synthesis of 3,4-dihydrocoumarin derivates from salicylaldehyde derivates and 1,3-dicarbonyl compounds under solvent-free microwave irradiation conditions was described. In this way, a range of compounds was obtained in moderate to good yields in a short reaction time.     

Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.