Enhanced reducibility of Ce1-xTixO2 compared to that of CeO2 and higher redox catalytic activity of Ce1-x-yTixPtyO2-delta compared to that of Ce1-xPtxO2-delta

Nanocrystalline Ce(1)(-)(x)Ti(x)O(2) (0 < or = x < or = 0.4) and Ce(1-)(x)(-)(y)Ti(x)Pt(y)O(2)(-)(delta) (x = 0.15, y = 0.01, 0.02) solid solutions crystallizing in fluorite structure have been prepared by a single step solution combustion method. Temperature programmed reduction and XPS study of Ce(1)(-)(x)Ti(x)O(2) (x = 0.0-04) show complete reduction of Ti(4+) to Ti(3+) and reduction of approximately 20% Ce(4+) to Ce(3+) state compared to 8% Ce(4+) to Ce(3+) in the case of pure CeO(2) below 675 degrees C. The substitution of Ti ions in CeO(2) enhances the reducibility of CeO(2). Ce(0.84)Ti(0.15)Pt(0.01)O(2)(-)(delta) crystallizes in fluorite structure and Pt is ionically substituted with 2+ and 4+ oxidation states. The H/Pt atomic ratio at 30 degrees C over Ce(0.84)Ti(0.15)Pt(0.01)O(2)(-)(delta) is 5 and that over Ce(0.99)Pt(0.01)O(2)(-)(delta) is 4 against just 0.078 for 8 nm Pt metal particles. Carbon monoxide and hydrocarbon oxidation activity are much higher over Ce(1-)(x)(-)(y)Ti(x)Pt(y)O(2) (x = 0.15, y = 0.01, 0.02) compared to Ce(1)(-)(x)Pt(x)O(2) (x = 0.01, 0.02). Synergistic involvement of Pt(2+)/Pt degrees and Ti(4+)/Ti(3+) redox couples in addition to Ce(4+)/Ce(3+) due to the overlap of Pt(5d), Ti(3d), and Ce(4f) bands near E(F) is shown to be responsible for improved redox property and higher catalytic activity.     

Oxygen-release/storage properties of Ce0.5M0.5O2 (M = Zr, Hf) oxides: interplay of crystal chemistry and electronic structure

Fluorite-type Ce0.5Zr0.5O2 and Ce0.5Hf0.5O2 have been synthesized by a solution combustion route, and their oxygen release and reduction have been investigated up to 850 degrees C. On reduction, the zirconium system forms two pyrochlore phases, Ce2Zr2O7 (pyrochlore-I) and Ce2Zr2O6.2 (pyrochlore-II), while the hafnium system forms only a disordered fluorite phase with the composition Ce0.5Hf0.5O1.77, under the same experimental conditions. The crystal structures of the reduction products have been characterized by powder X-ray diffraction and Rietveld refinement, and their electronic structures have been investigated by photoelectron spectroscopy and electrical conductivity measurements. Pyrochlore-I (a = 10.6727(4) A) is a semiconductor, while pyrochlore-II (a = 10.6463(8) A) is a good conductor (with a nearly temperature independent resistivity of approximately 2.5 ohm.cm in the 400-1000 K range). X-ray photoelectron spectroscopy (XPS) shows an admixture of Ce(5d,6s) with Zr(4d) and O(2p) and a significant density of states near EF in the highly reduced pyrochlore-II phase. The changes have been rationalized in terms of a qualitative energy band scheme that brings out the special role of zirconium vis-à-vis hafnium in the reduction/oxygen release properties of Ce0.5Zr0.5O2 and Ce0.5Hf0.5O2.     

Assessment of tomographic PIV in wall-bounded turbulence using direct numerical simulation data

Simulations of tomographic particle image velocimetry (Tomo-PIV) are performed using direct numerical simulation data of a channel flow at Reynolds number of Re _τ = 934, to investigate the influence of experimental parameters such as camera position, seeding density, interrogation volume size and spatial resolution. The simulations employ camera modelling, a Mie scattering illumination model, lens distortion effects and calibration to realistically model a tomographic experiment. Results are presented for camera position and orientation in three-dimensional space, to obtain an optimal reconstruction quality. Furthermore, a quantitative analysis is performed on the accuracy of first and second order flow statistics, at various voxel sizes normalised using the viscous inner length scale. This enables the result to be used as a general reference for wall-bounded turbulent experiments. In addition, a ratio relating seeding density and the interrogation volume size is proposed to obtain an optimal reference value that remains constant. This can be used to determine the required seeding density concentration for a certain interrogation volume size.     

Kinetics and mechanism of organocatalytic aza-Michael additions: direct observation of enamine intermediates

The imidazoles 1a-g add to the CC-double bond of the iminium ion 2 with rate constants as predicted by the equation log k = s(N)(N + E). Unfavourable proton shifts from the imidazolium unit to the enamine fragment in the adduct 3 account for the failure of imidazoles to take part in iminium-activated aza-Michael additions to enals.     

New Chemodosimetric Reagents as Ratiometric Probes for Cysteine and Homocysteine and Possible Detection in Living Cells and in Blood Plasma

In this work, we have rationally designed and synthesized two new reagents ( L₁ and L₂ ), each bearing a pendant aldehyde functionality. This aldehyde group can take part in cyclization reactions with β‐ or γ‐amino thiols to yield the corresponding thiazolidine and thiazinane derivatives, respectively. The intramolecular charge‐transfer (ICT) bands of these thiazolidine and thiazinane derivatives are distinctly different from those of the molecular probes ( L₁ and L₂ ). Such changes could serve as a potential platform for using L₁ and L₂ as new colorimetric/fluorogenic as well as ratiometric sensors for cysteine (Cys) and homocysteine (Hcy) under physiological conditions. Both reagents proved to be specific towards Cys and Hcy even in the presence of various amino acids, glucose, and DNA. Importantly, these two chemodosimetric reagents could be used for the quantitative detection of Cys present in blood plasma by using a pre‐column HPLC technique. Such examples are not common in contemporary literature. MTT assay studies have revealed that these probes have low cytotoxicity. Confocal laser scanning micrographs of cells demonstrated that these probes could penetrate cell membranes and could be used to detect intracellular Cys/Hcy present within living cells. Thus, the results presented in this article not only demonstrate the efficiency and specificity of two ratiometric chemodosimeter molecules for the quantitative detection of Cys and Hcy, but also provide a strategy for developing reagents for analysis of these vital amino acids in biological samples.     

Urea-thiazole/benzothiazole hybrids with a triazole linker: synthesis,antimicrobial potential,pharmacokinetic profile and in silico mechanistic studies

Molecular Diversity - Some urea-thiazole/benzothiazole hybrids with a triazole linker were synthesized via Cu(I)-catalysed click reaction. After successfully analysed by various spectral techniques...     

Nucleophilicities and carbon basicities of DBU and DBN

The nucleophilicity and Lewis basicity of DBU and DBN toward C(sp(2)) centers have been measured: nucleophilicities increase in the series DMAP < DBU < DBN < DABCO while Lewis basicities are DABCO < DMAP < DBU < DBN.     

Local structure of Pt and Pd ions in Ce(1-x)TixO2: x-ray diffraction, x-ray photoelectron spectroscopy, and extended x-ray absorption fine structure

Ce(1-x-y)Ti(x)Pt(y)O(2-delta) (x=0.15; y=0.01) and Ce(1-x-y)Ti(x)Pd(y)O(2-delta) (x=0.25; y=0.02 and 0.05) are found to be good CO oxidation catalysts [T. Baidya et al., J. Phys. Chem. B 110, 5262 (2006); T. Baidya et al., J. Phys. Chem. C 111, 830 (2007)]. A detailed structural study of these compounds has been carried out by extended x-ray absorption fine structure along with x-ray diffraction and x-ray photoelectron spectroscopy. The gross cubic fluorite structure of CeO(2) is retained in the mixed oxides. Oxide ion sublattice around Ti as well as Pt and Pd ions is destabilized in the solid solution. Instead of ideal eight coordinations, Ti, Pd, and Pt ions have 4+3, 4+3, and 3+4 coordinations creating long and short bonds. The long Ti-O, Pd-O, and Pt-O bonds are approximately 2.47 A (2.63 A for Pt-O) which are much higher than average Ce-O bonds of 2.34 A.