Liquid-liquid extraction of Th(IV) with Cyanex302

Summary Th(IV) was quantitatively extracted from 1 ^. 10^-3M HNO₃ using 1 ^. 10^-3M Cyanex302 in xylene and was stripped from the organic phase with 5M HCl. The effect of different parameters affecting the extraction was systematically studied to achieve optimum conditions for the extraction of thorium. Based on the data some separations of thorium from binary and complex mixtures and its recovery from monazite sand were achieved. The method is reproducible with a relative standard deviation of 0.4%.     

Observation of inter-grain Josephson effects in Y-Ba-Cu-O samples

Josephson effects have been observed in bulk samples of Y-Ba-Cu-O. The magnitude of the zero-voltage current is found to change systematically with externally applied small magnetic fields of a few mG. It is also found to vary when samples are irradiated with microwaves. These observations suggest the presence of inter-grain Josephson junctions.     

Polarographische Untersuchungen von aus Cadmium(II) und Propylendiamin in wäßrigem Dimethylformamid entstandenen Komplexen

The reduction of Cd(II) in propylenediamine was found to be reversible and diffusion controlled. The complexes of Cd(II) with propylenediamine in 25%, 50%, and 75% dimethylformamide have been studied polarographically using theDeFord andHume's treatment as extended byIrving. Increase in the stability constants was observed with increase in dimethylformamide percentage. The percentage composition of the various complexed and uncomplexed species in 25% and 50% dimethylformamide are presented.     

Polarographic study of complexes of metal ions and dibasic acids-II Complexes of lead with malonic, succinic, glutaric and adipic acids

The malonate, succinate, glutarate and adipate complexes of lead have been examined polarographically and the overall stability constants evaluated. The values found are log beta(1) = 2.60, 2.40, 2.48, 2.38; log beta(2) = 3.62, 3.73, 3.45, 3.20; log beta(3) = 4.32, 4.11, 3.90, 3.69, for the malonate, succinate, glutarate and adipate complexes respectively.     

Effect of bromination on the thermal properties of poly(2,6-dimethyl-1,4-phenylene oxide)

The thermal behavior of poly(2,6-dimethyl-1,4-phenyiene oxide) (PPO R resin), poly(3-bromo-2,6-dimethyl-1,4-phenylene oxide), and a series of their statistical copolymers with identical average molecular lengths has been characterized by thermogravimetry and computer-interfaced differential scanning calorimetry. The heat capacities are found to be additive with respect to the concentrations of the two components. The change in heat capacity at the glass transition ( C _p) is independent of composition for bromination of up to 75% of the repeat units. At higher bromine levels C _p decreases abruptly. This behavior is attributed to the temperature dependence of C _p for the two components. The glass transition temperature (T _g) of the copolymers varies nearly linearly with composition. A comparison of the experimental values ofT _g is made with various equations derived for statistical copolymers and homogeneous polymer blends. A modification of the Couchman equation is presented taking into account the temperature dependence ofC _p.

---

Zusammenfassung Das thermische Verhalten von Poly(2.6-dimethyl-1.4-phenylenoxyd) (PPO R-Harz), Poly(3-brom-2.6-dimethyl-1.4-phenylenoxyd) und einer Reihe von statistischen Copolymeren dieser Verbindungen mit gleicher durchschnittlicher Moleküllänge wurde durch Thermogravimetrie und Differential-Scanning-Kalorimetrie mit Computerinterface charakterisiert. Die Wärmekapazitäten sind hinsichtlich der Konzentrationen der beiden Komponenten additiv. Die Veränderung in der Wärmekapazität beim Übergang zum Glas (C_p) ist unabhängig von der Zusammensetzung bei Bromierung bis zu 75% der wiederho-lungseinheiten. Bei höheren Bromierungsgraden nimmtC _p abrupt ab. Dieses Verhalten wird der Temperaturabhängigkeit vonC _p der beiden Komponenten zugeschrieben. Die Glasübergangstemperatur (T_g) der Copolymeren verändert sich nahezu linear mit der Zusammensetzung. Ein Vergleich der experimentellen Werte von T_g wird mit verschiedenen für statistische Copolymere und Mischungen homogener Polymere abgeleiteten Gleichungen ausgeführt. Eine die Temperaturabhängigkeit vonC _p berücksichtigende Modifikation der Gleichung von Couchman wird angegeben.

---

, , (2,6- -1,4), (3--2,6--1,4- ) . , ë . ë (C ) 75%. C . C . T . . T . , . , C .

---

---

This work was supported by the National Science Foundation, Polymers Program (DMR 78-15279) and the General Electric Corporate Research and Development Center. The authors are indebted to the following individuals at General Electric CRD for their experimental assistance: S. R. Weissman and P. E. Gundlach (molecular weight characterizations); D. W. Marsh (X-ray analysis); V. H. Watkins and E. L. Hall (electron microscopy); and N. A. Marotta (thermogravimetry). P. E. Donahue and E. A. Williams are gratefully acknowledged for carrying out and interpreting the NMR experiments.

---

One of the authors (R. C. Bopp) would like to thank A. R. Shultz, J. T. Bendler, and D. M. White at General Electric CRD for their helpful discussions of this work and express his sincere appreciation to Professor P. R. Couchman (Rutgers University) for his illuminating discussions of the thermodynamic basis of his equation.     

Effect of macropore convection on mass transfer in a bidisperse adsorbent particle

The importance of adsorption induced convection in the macropores of a bidisperse adsorbent particle is studied for a step change in mole fraction or total pressure at the surface of the particle. Material balance equations for a binary gas mixture are written for both the macropores and the macropores with allowance for convection in the macropores, which is described by Darcy's law. The coupled set o1' partial differential equations is solved by orthogonal collocation. The enhancement in mass transfer as a result of convection is assessed by comparing the fractional uptake curves obtained with and without allowance for convection. Both equilibrium-based and kinetic-based separation processes are considered. The effect of the presence of convection in determining the controlling diffusional resistance (macropore or micropore) is also examined. Due to inclusion of convection no single non-dimensional group alone can determine the relative importance of macropore and micropore resistances. Results show that convection can significantly affect the performance of an equilibrium-based macropore diffusion controlled process and that the enhancement in mass transfer is more for a particle with a high value of Darcy permeability.     

Chronopotentiometry in fused lithium chloride-potassium chloride

Previous work in the application of chronopotentiometry in aqueous and fused salt media has been reviewed. This investigation describes the application of this principle to the reduction of cadmium, cobalt, lead and thallium ions in a fused eutectic mixture of potassium, chloride and lithium. chloride at 450°C. Platinum microelectrodes of different areas and geometry were used. The transition time was limited to the order of 0.2 to 0.7 sec using oscillographic recording.It was found that so long as the dimensions of the electrode were considerably greater than the thickness of the diffusion, layer, linear diffusion theory was obeyed. The transition time constants for cadmium, cobalt, lead and thallium ions were found to be 0.83± 0.02, 0.90 ± 0.03, 0.95 ± 0.04, and 0.59 ± 0.02.10³ amp cm sec$\text{1}\text{2}$ per mole, respectively. The diffusion coefficients of these ions were calculated to be 2.08, 2.42, 2.18 and 3.88.IO^-5 cm² sec^-1, respectively.     

Joule heating in packed capillaries used in capillary electrochromatography

Effective heat dissipation is critical for reproducible and efficient separations in electrically driven separation systems. Flow rate, retention kinetics, and analyte diffusion rates are some of the characteristics that are affected by variation in the temperature of the mobile phase inside the column. In this study, we examine the issue of Joule heating in packed capillary columns used in capillary electrochromatography (CEC). As almost all commonly used CEC packings are poor thermal conductors, it is assumed that the packing particles do not conduct heat and heat transfer is solely through the mobile phase flowing through the system. The electrical conductivity of various mobile phases was measured at different temperatures by a conductivity meter and the temperature coefficient for each mobile phase was calculated. This was followed by measurement of the electrical current at several applied voltages to calculate the conductivity of the solution within the column as a function of the applied voltage. An overall increase in the conductivity is attributed to Joule heating within the column, while a constant conductivity means good heat dissipation. A plot of conductivity versus applied voltage was used as the indicator of poor heat dissipation. Using theories that have been proposed earlier for modeling of Joule heating effects in capillary electrophoresis (CE), we estimated the temperature within CEC columns. Under mobile and stationary phase conditions typically used in CEC, heat dissipation was found to be not always efficient. Elevated temperatures within the columns in excess of 23 degrees C above ambient temperature were calculated for packed columns, and about 35 degrees C for an open column, under a given set of conditions. The results agree with recently published experimental findings with nuclear magnetic resonance (NMR) thermometry, and Raman spectroscopic measurements.     

Isolable acetylene complexes of copper and silver

Copper and silver play important roles in acetylene transformations but isolable molecules with acetylene bonded to Cu(i) and Ag(i) ions are scarce. This report describes the stabilization of π-acetylene complexes of such metal ions supported by fluorinated and non-fluorinated, pyrazole-based chelators. These Cu(i) and Ag(i) complexes were formed readily in solutions under an atmosphere of excess acetylene and the appropriate ligand supported metal precursor, and could be isolated as crystalline solids, enabling complete characterization using multiple tools including X-ray crystallography. Molecules that display κ²-or κ³-ligand coordination modes and trigonal planar or tetrahedral metal centers have been observed. Different trends in coordination shifts of the acetylenic carbon resonance were revealed by ¹³C NMR spectroscopy for the Cu(i) and Ag(i) complexes. The reduction in acetylene _{C C} due to metal ion coordination is relatively large for copper adducts. Computational tools were also used to quantitatively understand in detail the bonding situation in these species. It is found that the interaction between the transition metal fragment and the acetylene ligand is significantly stronger in the copper complexes, which is consistent with the experimental findings. The C C distance of these copper and silver acetylene complexes resulting from routine X-ray models suffers due to incomplete deconvolution of thermal smearing and anisotropy of the electron density in acetylene, and is shorter than expected. A method to estimate the C C distance of these metal complexes based on their experimental _{C C} is also presented.

Gaseous acetylene can be trapped on copper(i) and silver(i) sites supported by pyrazole-based scorpionates to produce isolable molecules for detailed investigations and the study of metal-acetylene bonding.     

Pressure induced phase transitions in Ga1 − x In x P

We have theoretically investigated the effect of pressure on the structural stability of GaP?:?InP mixed system. The three-body-potential (TBP) model has been used. The TBP model consists of long-range as well as short-range interactions; the long-range part includes the modified Coulomb force as well as a three-body term; the short-range part in TBP defines the van der Waals and overlap repulsive interactions. We observe a pressure-induced structural phase transformation from ZnS (B3) to NaCl (B1) type phase in Ga _1?x In _x P. Our calculated transition pressures for the initial GaP and final InP compound semiconductors are in good agreement with other reported data.