Coulomb blockade electrometer with a high-T c island

We report on a successful attempt to fabricate a Coulomb blockade electrometer consisting of an ultrasmall YBa₂Cu₃O_7−δ (YBCO) island coupled to two gold electrodes through a high-resistance native surface tunnel barrier. A third electrode placed near the island was used as an electrostatic gate. Spectra typical for tunneling into the YBCO superconductor were reproducibly measured. At temperatures below 0.5 K the low-bias conductance was suppressed by the Coulomb blockade. The blockade could be periodically varied by the gate potential. An external magnetic field of up to 5 T strongly influenced the transport via the island but without any change in the period of the Coulomb oscillations. Pis’ma Zh. éksp. Teor. Fiz. 63, No. 2, 112–117 (25 January 1996) Published in English in the original Russian journal. Edited by Steve Torstveit.     

Bank of reference samples of blank urine from livestock

From three species of livestock, bovine, ovine and porcine, samples of urine from each 10–20 different animals were collected. The animals originated from a governmental experimental farm and differed in race, age, sex and were fed with different types of feed. Fifty different samples of urine were lyophilised in units of 5 mL in sealed amber glass bottles. After lyophilisation of the samples, several quality control tests were performed. The variation in net weight of the units of urine and the lyophilisates ranged from 0.01%–1.7% and 0.1%–10%, respectively. Most values did not exceed 0.1% for urines and 1% for lyophilisates. The residual water content of the lyophilisates was determined by the Karl-Fisher titration method. The average percentage of residual water ranged from 1.0%–7.0% for bovine, from 1.3%–3.0% for porcine and from 1.6%–5.5% for ovine urine lyophilisates. Further, all different samples were analysed for the presence of anabolic compounds with a multi-residue procedure developed at the CRL. In two samples of bovine urine the presence of α-boldenone was detected and confirmed. In most porcine urines the endogenous steroids α-testosterone and α-estradiol were detected. In a number of porcine and ovine urine samples α- and β-zearalenol were detected. The origin of these compounds is the f2-toxin produced by a Fusarium fungus. In ovine samples α-testosterone and α-estradiol were detected.     

Preparation and Characterisation of Nano-Structured WO<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> Layers for Photoelectrochromic Devices

Nano-structured WO₃-TiO₂ layers were prepared by the sol-gel route. To obtain transparent, porous and crack free layers up to 0.8 μ m with a single dipping cycle a templating strategy was used. As a template three-dimensionally network based on organically modified silane was introduced to the WO₃ and TiO₂ sols. The WO₃ layers were dip-coated onto the conductive glass substrate (TCO) and the TiO₂ layers on the top of the WO₃ layer. The morphology and the structure of the layers were determined by Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HR-TEM), Energy Dispersive X-Ray Spectroscopy (EDXS), Auger and Infrared spectroscopy. SEM image of the WO₃-TiO₂ layer confirmed the nano-porosity of the layers and give the size of the particles of about 10 nm for TiO₂ and 30 nm for WO₃ layer. Further analysis indicated that the titanium sol penetrates the WO₃ layer. Particles in the WO₃ layer consist of a crystalline monoclinic WO₃ core surrounded by a 5–10 nm amorphous phase consisting of WO₃, TiO₂ and SiO₂. The WO₃-TiO₂ layers were used to assemble all solid state photoelectrochromic (PE) devices. Under 1 sun irradiation (1000 W/m²) the visible transmittance of the PE device changes from 62% to 1.6%. The colouring and bleaching processes last about 10 minutes.     

Network forming properties of various proteins adsorbed at the air/water interface in relation to foam stability

A series of proteins was studied with respect to their ability to form a network at the air/water interface and their suitability as foaming agents and foam stabilizers. Proteins were chosen with a range of structures from flexible to rigid/globular: beta-casein, beta-lactoglobulin, ovalbumin, and (soy) glycinin. Experiments were performed at neutral pH except for glycinin, which was studied at both pH 3 and pH 6.7. The adsorption process was followed with an automated drop tensiometer (ADT). Network forming properties were assessed in terms of surface dilational modulus (determined with the ADT), the critical falling film length (L(still)) and flow rate (Q(still)) below which a stagnant film exists (as measured with the overflowing cylinder technique), and the fracture stress and fracture strain measured in surface shear. It was found that glycinin (pH 3) can form an interfacial gel in a very short time, whereas beta-casein has very poor network-forming properties. Hardly any foam could be produced at the chosen conditions with glycinin (pH 6.7) and with ovalbumin, whereas beta-casein, beta-lactoglobulin, and glycinin (pH 3) were good foaming agents. It seems that adsorption and unfolding rate are most important for foam formation. Once the foam is formed, a rigid network might favor stabilizing the foam.     

Ultraviolet-B-induced cyclobutane-pyrimidine dimer formation and repair in Arctic marine macrophytes

The significance of ultraviolet-B radiation (UVBR: 280-315 nm)-induced DNA damage as a stress factor for Arctic marine macrophytes was examined in the Kongsfjord (Spitsbergen, 78 degrees 55.5'N, 11 degrees 56.0'E) in summer. UVBR penetration in the water column was monitored as accumulation of cyclobutane-pyrimidine dimers (CPD) in bare DNA. This showed that UVBR transparency of the fjord was variable, with 1% depths ranging between 4 and 8 m. In addition, induction and repair kinetics of CPD were studied in several subtidal macrophytes obtained from the Kongsfjord (5-15 m). Surface exposure experiments demonstrated CPD accumulation in Palmaria palmata, Devaleraea ramentacea, Phycodrys rubens, Coccotylus truncatus and Odonthalia dentata. In artificial light, field collected material of P. palmata, D. ramentacea, P. rubens and Laminaria saccharina showed efficient CPD repair, with only 10% of the artificially induced CPD remaining after 5 h. No significant differences in repair rate were observed among these species. CPD repair was slower or absent in O. dentata, C. truncatus and Monostroma arcticum, indicating that fast repair mechanisms such as photolyase were not continuously expressed in these species. CPD repair rates were not directly related to the vertical distribution of algae in the water column and to the reported UV sensitivity of the examined species. Dosimeter incubations showed that maximal exposure to DNA damaging wavelengths was low for all examined species. Furthermore, most species collected below the 1% depth for DNA damage displayed efficient CPD repair, suggesting that UVBR-induced CPD currently impose a minor threat for mature stages of these species growing in the Kongsfjord, Spitsbergen.     

Are "pinholes" the cause of excess current in superconducting tunnel junctions? A study of Andreev current in highly resistive junctions

In highly resistive superconducting tunnel junctions, excess subgap current is usually observed and is often attributed to microscopic pinholes in the tunnel barrier. We have studied the subgap current in superconductor-insulator-superconductor (SIS) and superconductor-insulator-normal-metal (SIN) junctions. In Al/AlO(x)/Al junctions, we observed a decrease of 2 orders of magnitude in the current upon the transition from the SIS to the SIN regime, where it then matched theory. In Al/AlO(x)/Cu junctions, we also observed generic features of coherent diffusive Andreev transport in a junction with a homogenous barrier. We use the quasiclassical Keldysh-Green function theory to quantify single- and two-particle tunneling and find good agreement with experiment over 2 orders of magnitude in transparency. We argue that our observations rule out pinholes as the origin of the excess current.     

Photon generation in an electromagnetic cavity with a time-dependent boundary

We report the observation of photon generation in a microwave cavity with a time-dependent boundary condition. Our system is a microfabricated quarter-wave coplanar waveguide cavity. The electrical length of the cavity is varied by using the tunable inductance of a superconducting quantum interference device. It is measured at a temperature significantly less than the resonance frequency. When the length is modulated at approximately twice the static resonance frequency, spontaneous parametric oscillations of the cavity field are observed. Time-resolved measurements of the dynamical state of the cavity show multiple stable states. The behavior is well described by theory. Our results may be considered a preliminary step towards demonstrating the dynamical Casimir effect.     

Electrocatalytic Determination of Sulfite at Immobilized Microdroplet Liquid|Liquid Interfaces: The EIC′ Mechanism

Liquid|liquid interfaces provide a natural boundary and a reactive interface where an organic phase is in contact with an aqueous analyte. The selectivity of ion transfer processes at liquid|liquid interfaces can help to provide sensitivity, introduce reactive reagents, or allow analyte accumulation at the electrode surface. In this study, microdroplet deposits of the organic liquid 4‐(3‐phenylpropyl)‐pyridine (PPP) with the ferrocenylmethyl‐dodecyldimethylammonium⁺ (FDA⁺) redox system are deposited onto a basal plane pyrolytic graphite electrode and employed to transfer anions from the aqueous into the organic phase. A clear trend of more hydrophobic anions transferring more readily (at more negative potentials) is observed and an ESI‐mass spectrometry method is developed to confirm the transfer. Subsequently, the electrocatalytic oxidation of sulfite, SO₃^2?, within the organic phase and in the presence of different electrolyte anions is investigated. Competition between sulfite transfer and inert anion transfer occurs. The electrocatalytic sulfite oxidation is suppressed in the presence of PF₆^? and occurs most readily in the presence of the hydrophilic nitrate anion. The resulting process can be classified as an electrocatalytic EIC′‐process (E: electron transfer; I: ion transfer; C: chemical reaction step). The effectiveness of the electrocatalytic process is limited by i) competition during anion transfer and ii) the liquid|liquid interface acting as a diffusion barrier. The analytical sensitivity of the method is limited to ca. 100 μM SO₃^2? (or ca. 8 ppm) and potential approaches for improvement of this limit are discussed.     

Towards a universal product ion mass spectral library - reproducibility of product ion spectra across eleven different mass spectrometers

Product ion spectra produced by collision-induced dissociation (CID) in tandem mass spectrometry experiments can differ markedly between instruments. There have been a number of attempts to standardise the production of product ion spectra; however, a consensus on the most appropriate approach to the reproducible production of spectra has yet to be reached. We have previously reported the comparison of product ion spectra on a number of different types of instruments - a triple quadrupole, two ion traps and a Fourier transform ion cyclotron resonance mass spectrometer (Bristow AWT, Webb KS, Lubben AT, Halket JM. Rapid Commun. Mass Spectrom. 2004; 18: 1). The study showed that a high degree of reproducibility was achievable. The goal of this study was to improve the comparability and reproducibility of CID product ion mass spectra produced in different laboratories and using different instruments. This was carried out experimentally by defining a spectral calibration point on each mass spectrometer for product ion formation. The long-term goal is the development of a universal (instrument independent) product ion mass spectral library for the identification of unknowns.The spectra of 48 compounds have been recorded on eleven mass spectrometers: six ion traps, two triple quadrupoles, a hybrid triple quadrupole, and two quadrupole time-of-flight instruments. Initially, 4371 spectral comparisons were carried out using the data from eleven instruments and the degree of reproducibility was evaluated. A blind trial has also been carried out to assess the reproducibility of spectra obtained during LC/MS/MS.The results suggest a degree of reproducibility across all instrument types using the tuning point technique. The reproducibility of the product ion spectra is increased when comparing the tandem in time type instruments and the tandem in space instruments as two separate groups. This may allow the production of a more limited, yet useful, screening library for LC/MS/MS identification using instruments of the same type from different manufacturers.     

Bias and temperature dependence of the noise in a single electron transistor

Models generalizing the su (2) XX spin-chain were recently introduced. These XXC models also have an underlying su (2) structure. Their construction method is shown to generalize to the chains based on the fundamental representations of the A_m Lie algebras. Integrability of the new models is shown in the context of the quantum inverse scattering method. Their R-matrix is found and shown to yield a representation of the Hecke algebra. The diagonalization of the transfer matrices is carried out using the algebraic Bethe Ansatz. I comment on eventual generalizations and possible links to reaction-diffusion processes. Received: 24 June 1998 / Received in final form: 8 September 1998 / Accepted: 10 September 1998