A novel photoinduced ring opening and isomerization of adamantane-2-spiro isoxazolines using Mo(CO)6

The Mo(CO)₆-mediated photoinduced ring-opening reactions of adamantane isoxazolines involve novel rearrangement that provide enaminoketones as major products and β-hydroxy ketones as minor ones; in contrast, only β-hydroxy ketones and α,β-unsaturated ketones were obtained under thermal condition.     

Hopping conduction in amorphous Nb2O5 thin films

The low field conduction mechanism in amorphous Nb₂O₅ doped with Nb is investigated by measurements of the ac conductivity as a function of frequency (3 Hz?6 × 10⁶ Hz), dc conductivity as a function of temperature (100–400 K), capacitance as a function of frequency (3 Hz?6 × 10⁶ Hz) and conductance G as a function of voltage at 10³ Hz. Loss tangent and quality factor data are also given because of their technical and scientific relevance. Evidence for hopping conduction at low applied fields is presented by the following results: (1) a monotonic increase in ac conductivity σ(ω)αωⁿ where 0.5 < n < 1.0 in the range 3 Hz?6 × 10⁶ Hz; (2) a linear dependence of current on voltage at low fields; and (3) low activation energy for dc conduction with a transition at 210 K to a still lower activation energy; and (4) a decrease in polarizability with frequency. At high fields, E > 10⁵ V/cm, dc conductivity is dominated by the field emission mechanism of the Poole-Frenkel or Poole type.     

Highly chemoselective palladium-catalyzed Sonogashira coupling of 5-iodouridine-5′-triphosphates with propargylamine: a new efficient method for the synthesis of 5-aminopropargyl-uridine-5′-triphosphates

An efficient palladium-catalyzed Sonogashira coupling of 5-iodouridine-5′-triphosphates with propargylamine is described. The catalytic reaction is highly chemoselective that affords exclusively 5-aminopropargyl-uridine-5′-triphosphates in good yields with high purities (>99.8%).     

Synthesis,Spectroscopic Analysis,and In-Vitro Antimicrobial Evaluation of some Tetrahydrobenzo[a]Xanthene-11-Thiones

Abstract

A series of 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthene-11-thiones were synthesized by the reaction of substituted 12-aryl-8,9,10,12-tetrahydrobenzo[a]xanthene-11-ones with Lawesson's Reagent in toluene under standard reaction conditions. All synthesized compounds were characterized by IR, NMR (¹H and ¹³C), and mass spectra. Moreover, 2D-NMR (HOMOCOSY, HSQC, and HMBC) studies were also performed for compound 10b. The synthesized compounds were also screened for their antibacterial activities.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfer, and Silicon and the Related Elements for the following free supplemental files: Additional figures.]     

Synthesis and characterisation of p-diethylaminomethylthiacalix[4]arene for selective recovery of platinum from automotive catalyst residue

The ability of chloroform solutions of p-diethylaminomethylthiacalix[4]arene 1 to extract platinum from HCl media was tested. As an ion-pair extractant, compound 1 had the highest platinum extraction ability among all the thiacalix[n]arene derivatives tested in this study. Compound 1 was a highly specific extractant for Pt(IV) ions from single-metal solutions and platinum-group metal solutions from automotive catalyst residue. Various conditions such as contact time, pH, concentration of 1, effect of chloride ions, effect of acidity and Pt(IV) concentration were studied. The distribution ratio of platinum ions (D) was calculated. The platinum complex stoichiometry ratio was obtained using slope analysis. The 1–Pt(IV) complex was characterised using X-ray photoelectron spectroscopy, FT-IR and ¹H NMR. Finally, the Pt(IV) extraction percentage of compound 1 was compared with that of previously reported thiacalix[n]arene-based extractants.     

Flow Injection Analysis of Aluminum Chlorohydrate in Antiperspirant Deodorants Using a Built‐in Three‐in‐one Screen‐Printed Silver Electrode

A screen‐printed silver strip with a built‐in three‐in‐one electrode (SPAgE) configuration of Ag‐working, Ag‐counter and Ag/Ag_xO (silver oxides) pseudoreference electrodes has been developed for sensitive and selective electrochemical flow injection analysis (FIA) of aluminum chlorohydrate (ACH) present in antiperspirants, through the free Cl^? ion liberated from ACH in aqueous medium, as a redox signal at Ag‐working electrode in pH 6 phosphate buffer solution (PBS). The solution phase and instrumental parameters were systematically optimized. The calibration graph was linear in the window 1–200 ppm concentration of ACH and the lowest detection limit (S/N=3) was 295 ppb with a slope of 0.0989 μA/ppm and regression coefficient of 0.998. Calculated relative standard deviation (RSD) values for the detection of 5 and 50 ppm ACH by this method are 2.21 % and 2.16 %, respectively. Four different antiperspirant deodorants real samples with and without ACH content were successfully analyzed and the detected values obtained were found to be in good agreement with the product labeled values.     

Studies on oxygen chemical surface exchange and electrical conduction in thin film nanostructured titania at high temperatures and varying oxygen pressure

We report on oxygen surface exchange studies in ～450-nm-thick nanocrystalline titania films with an average grain size of ～13 nm by electrical conductivity relaxation along with the conductivity measurements at varying temperatures and oxygen partial pressures (pO(2)s). By electrochemical impedance spectroscopy technique, the high temperature conductivity was measured in the pO(2) range from ～10(-16) to ～10(-6) Pa at temperatures from 973 to 1223 K and activation energy, ΔE(a), for conduction was estimated as ～3.23 eV at pO(2) ～10(-11) Pa. Under reducing atmosphere (pO(2) < 10(-6) Pa), two distinct n-type conduction regimes were observed and corresponding predominant defects are discussed while, at high pO(2) regime (pO(2) >10(-6) Pa), ionic conduction appears dominant leading to a conductivity plateau. The surface relaxation was observed to have two independent time constants likely originating from microstructural effects. The surface exchange coefficients are measured as ～10(-8)-10(-7) m∕s and ～10(-9)-10(-8) m∕s for each contribution with ΔE(a)s of 2.79 and 1.82 eV, respectively, without much pO(2) dependence across several orders of pO(2) range of ～10(-16)-10(-6) Pa in the temperature range between 973 and 1223 K. The results are of potential relevance to understanding the near-surface chemical phenomena in nanocrystalline titania which is of great interest for energy and environmental studies.     

Construction of anion‐responsive crosslinked polypseudorotaxane based on molecular recognition of pillar[5]arene

A pillar[5]arene pendant polymer (Poly‐P[5]A) is synthesized via ROMP using Grubb's first‐generation catalyst. GPC analysis of the polymer suggested ~30 pendant pillar[5]arene units in the polymer. Supramolecular polypseudorotaxane assembly is constructed by intermolecularly crosslinking pendant pillar[5]arene units using a bispyridinium guest via host–guest complexation. Formation of the polypseudorotaxane assembly is characterized by 1D/2D NMR techniques and DLS analysis. Moreover, anion‐responsiveness of the polypseudorotaxane assembly is demonstrated by ¹H NMR spectroscopic analysis using chloride anion as external stimulus. Scanning electron microscopic analysis of the poly‐P[5]A showed breath‐figure assembly and upon crosslinking with G.2PF₆ the polymer self‐assemble to give a supramolecular polymer network. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1508–1515