Ligand exchange separation of amines on copper (II) sorbed on zinc silicate

Summary Papers impregnated with Cu(II) sorbed on zinc silicate have been used to study the ligand exchange chromatographic behavior of amines. R_F values of 16 amines have been studied in 6 different systems. On the basis of differences in R_F values various analytically important qualitative separations of amines on impregnated papers and quantitative separations on columns of copper(II) sorbed on zinc silicate have been achieved.     

Synthesis of silver nanoprisms in formamide

Polygonal (mainly triangular) silver nanoprisms were prepared by reducing silver perchlorate in formamide in the presence of polyethylene glycol (PEG) at room temperature. The reduction of silver ions by formamide leads to the deposition of arrays of triangular shaped silver nanoparticles on the glass walls of the container, accompanied by evolution of CO2 gas. In the presence of poly(N-vinyl-2-pyrrolidone) (PVP) and PEG (1:1), both nanospheres and nanoprisms are formed.     

Thermal behaviour of bisitaconimide and reactive diluent blends

Thermal behaviour of blends based on N,N'-bis(4-itaconimidophenyl) ether (IE) and 4,4'-bis(4-allyl-2-methoxyphenoxy) benzophenone (R₁) or 4,4'-bis(2-allylphenoxy) benzophenone (R₂) are described in this paper. The reactive diluent content was varied from 5-50% (mass/mass) in these blends. A decrease in the melting point and exothermic peak temperature was observed with increasing mass percent of reactive diluent. Thermal stability of blends was affected at high mass percentage of reactive diluents. This revised version was published online in August 2006 with corrections to the Cover Date.     

Imido Derivatives of Titanium (IV)

Reactions of titanium(IV) isopropoxide with acetamide, benzamide, and nicotinamide in different stoichiometric ratios in anhydrous benzene yielded imido derivatives of type (PrⁱO)_4-nTi(NHOCR)_n where n = 1, 2, 3, and 4; R = CH₃, C₆H₅, and C₅H₄N. All these complexes are insoluble in common organic solvents suggesting their polymeric nature. All these derivatives, with the exception of three which have characteristic melting points, did not sublime at 250°C in vacuo nor did they appear to decompose appreciably below 300°C. I.R. spectra of these derivatives are discussed.     

Preparation of Silver Nanofluids with High Electrical Conductivity

Silver nanofluids have been prepared by single-step chemical reduction method starting with silver nitrate metal precursor. Electrical conductivity of nanofluids has been investigated, as it has largely been overlooked despite immense technological importance. Extremely low yield nanofluid (0.013 wt%) is found to give high electrical conductivity attributed to smaller size monodisperse nanoparticles obtained (16.3 nm). Increased precursor concentration has lead to high yield and high electrical conductivity. Larger particle sizes obtained are optimized by reducing the yield at high concentration, as well as by dilution. The stability is exceptionally higher than the reported results for copper nanofluids.     

Rational Development of Guanidinate and Amidinate Based Cerium and Ytterbium Complexes as Atomic Layer Deposition Precursors: Synthesis,Modeling, and Application

Owing to the limited availability of suitable precursors for vapor phase deposition of rare-earth containing thin-film materials, new or improved precursors are sought after. In this study, we explored new precursors for atomic layer deposition (ALD) of cerium (Ce) and ytterbium (Yb) containing thin films. A series of homoleptic tris-guanidinate and tris-amidinate complexes of cerium (Ce) and ytterbium (Yb) were synthesized and thoroughly characterized. The C-substituents on the N-C-N backbone (Me, NMe₂, NEt₂, where Me=methyl, Et=ethyl) and the N-substituents from symmetrical iso-propyl (iPr) to asymmetrical tertiary-butyl (tBu) and Et were systematically varied to study the influence of the substituents on the physicochemical properties of the resulting compounds. Single crystal structures of [Ce(dpdmg)₃] 1 and [Yb(dpdmg)₃] 6 (dpdmg=N,N'-diisopropyl-2-dimethylamido-guanidinate) highlight a monomeric nature in the solid-state with a distorted trigonal prismatic geometry. The thermogravimetric analysis shows that the complexes are volatile and emphasize that increasing asymmetry in the complexes lowers their melting points while reducing their thermal stability. Density functional theory (DFT) was used to study the reactivity of amidinates and guanidinates of Ce and Yb complexes towards oxygen (O₂) and water (H₂O). Signified by the DFT calculations, the guanidinates show an increased reactivity toward water compared to the amidinate complexes. Furthermore, the Ce complexes are more reactive compared to the Yb complexes, indicating even a reactivity towards oxygen potentially exploitable for ALD purposes. As a representative precursor, the highly reactive [Ce(dpdmg)₃] 1 was used for proof-of-principle ALD depositions of CeO₂ thin films using water as co-reactant. The self-limited ALD growth process could be confirmed at 160 °C with polycrystalline cubic CeO₂ films formed on Si(100) substrates. This study confirms that moving towards nitrogen-coordinated rare-earth complexes bearing the guanidinate and amidinate ligands can indeed be very appealing in terms of new precursors for ALD of rare earth based materials.     

Thiol Modified Chitosan Self-Assembled Monolayer Platform for Nucleic Acid Biosensor

A self-assembled monolayer (SAM) of thiol modified chitosan (SH-CHIT), with thioglycolic acid (TGA) as a modifier to bestow thiol groups, has been prepared onto gold (Au)-coated glass plates for fabrication of the nucleic acid biosensor. The chemical modification of CHIT via TGA has been evidenced by Fourier transform infrared spectroscopy (FT-IR) studies, and the biocompatibility studies reveal that CHIT retains its biocompatible nature after chemical modification. The electrochemical studies conducted onto SH-CHIT/Au electrode reveal that thiol modification in CHIT amino end enhances the electrochemical behavior indicating that it may be attributed to delocalization of electrons in CHIT skeleton that participates in the resonance process. The carboxyl group modified end of DNA probe has been immobilized onto SH-CHIT/Au electrode using N-ethyl-N′-(3-dimethylaminopropyl)carbodimide (EDC) and N-hydroxysuccinimide (NHS) chemistry for detection of complementary, one-base mismatch and non-complementary sequence using electrochemical and optical studies for Mycobacterium tuberculosis detection. It has been found that DNA-SH-CHIT/Au bioelectrode can specifically detect 0.01 μM of target DNA concentration with sensitivity of 1.69?×?10^?6 A μM^?1.