Synthesis, structure and properties of N-acetylated derivatives of methyl 5-amino-1H-[1,2,4]triazole-3-carboxylate

Methyl 5-amino-1H-[1,2,4]triazole-3-carboxylate hydrochloride (1). and free ester (2). were obtained and 2 was reacted with Ac(2)O to give the acetylated products 3-6. Compounds 1-6 were studied using HPLC, GC-MS, FTIR and multinuclear NMR spectroscopy, including the cross-polarisation magic angle spinning (CPMAS) technique. The results of the acetylation of 2 were compared to those of the acetylation of 5-amino-1H-[1,2,4]triazole, and for 2 a significant decrease in the susceptibility to acetylation was found. The reaction of 2 with Ac(2)O at 20 degrees C, regardless of the amount and the concentration of the latter, including neat Ac(2)O, proceeds fully regioselectively and leads to one product: methyl 1-acetyl-5-amino-1H-[1,2,4]triazole-3-carboxylate (3). In sharp contrast to 5-amino-1H-[1,2,4]triazole, neither an additional monoacetylated isomer, whether annular or exocyclic, nor any diacetylated derivative could be detected. The diacetylation of 2 requires the process to be carried out in neat boiling Ac(2)O and, as in the case of 5-amino-1H-[1,2,4]triazole, gives two diacetylated isomers. These are methyl 1-acetyl-3-(acetylamino)-1H-[1,2,4]triazole-5-carboxylate (4) and 1-acetyl-5-(acetylamino)-1H-[1,2,4]triazole-3-carboxylate (5). Hypothetical pathways of their formation have been suggested. A mixture of 4 and 5 upon hydrolysis of the ring acetyl group gives the monoacetylated derivative methyl 5-(acetylamino)-1H-[1,2,4]triazole-3-carboxylate (6). The spectroscopic, structural and conformational characteristics of compounds 1-6 have been given and methods for their preparation have been provided.     

Racemization-Free Recovery of α-Hydroxyphosphonates from Their Carboxylic Esters

Ammonolysis (25% aqueous NH₃ - alcohols or THF) of carboxylic esters obtained from diastereoisomerically pure α-hydroxyphosphonates leads to recovery of the phosphonates without racemization in good to excellent yields.     

Simultaneous determination of Cd,Cr, Cu,Ni, Pb and Zn in sewage sludge by slurry introduction ICP-OES method

In order to evaluate the slurry nebulisation method as an alternative method for analysis of sewage sludge, the metal content of sludge samples of different origins was determined. The concentrations of six elements: Cd, Cr, Cu, Ni, Pb, and Zn were determined by introducing the sludge as a slurry into an inductively coupled plasma optical emission spectrometer (ICP-OES). Calibration was performed by using aqueous standard solutions. For comparison, the sewage sludge was also digested by microwave digestion and introduced into the plasma as an aqueous solution. The accuracy of the method was checked by analysing a sewage sludge certified reference material (CRM 007-040 Sewage Sludge). The Student's t-test showed that values obtained using slurry nebulisation were close to the certified values at a 95% confidence level. The values of elements Cd 11.1?±?0.8; Cr 37.7?±?3.3; Cu 563.3?±?38.4; Pb 119.2?±?10.1; Zn 729?±?68.2?mg?kg^?1 obtained using this method were comparable with those obtained using the conventional method. The slurry method can, therefore, be successfully applied to the determination of content of each element in sewage sludge with RSD less than 3%, without the need to predissolve them. This could avoid the use of hazardous chemicals, incomplete dissolution and loss of volatile analytes.     

Speciation analysis of aluminium and aluminium fluoride complexes by HPIC-UVVIS

The study presents a new analytical method for speciation analysis in fractionation of aluminium fluoride complexes and free Al³⁺ in soil samples. Aluminium speciation was studied in model solutions and soil extract samples by means of high performance ion chromatography (HPIC) with UV-VIS detection using post-column reaction with tiron for the separation and detection of aluminium fluoride complex and Al³⁺ forms during one analysis. The paper presents particular stages of the chromatographic process optimization involving selecting the appropriate eluent strength, type of elution or concentration and quantity of derivatization reagent. HPIC was performed on a bifunctional analytical column Dionex IonPac CS5A. The use of gradient elution and the eluents A: 1 M NH₄Cl and B: water acidified to pH of eluent phase, enabled full separation of fluoride aluminium forms as AlF₂⁺, AlF₃⁰, AlF₄⁻ (first signal), AlF²⁺ (second signal) and form Al³⁺ in a single analytical procedure. The proposed new method HPIC-UVVIS was applied successfully in the quantitative and qualitative analysis of soil samples.     

Antimicrobial Activity and Barrier Properties against UV Radiation of Alkaline and Enzymatically Treated Linen Woven Fabrics Coated with Inorganic Hybrid Material

One of the directions of development in the textiles industry is the search for new technologies for producing modern multifunctional products. New solutions are sought to obtain materials that will protect humans against the harmful effects of the environment, including such factors as the activity of microorganisms and UV radiation. Products made of natural cellulose fibers are often used. In the case of this type of material, it is very important to perform appropriate pretreatment before subsequent technological processes. This treatment has the aim of removing impurities from the surface of the fibers, which results in the improvement of sorption properties and adhesion, leading directly to the better penetration of dyes and chemical modifiers into the structure of the materials. In this work, linen fabrics were subjected to a new, innovative treatment being a combination of bio-pretreatment using laccase from Cerrena unicolor and modification with CuO-SiO₂ hybrid oxide microparticles by a dip-coating method. To compare the effect of alkaline or enzymatic pretreatment on the microstructure of the linen woven fabrics, SEM analysis was performed. The new textile products obtained after this combined process exhibit very good antimicrobial activity against Candida albicans, significant antibacterial activity against the Gram-negative Escherichia coli and the Gram-positive Staphylococcus aureus, as well as very good UV protection properties (ultraviolet protection factor (UPF) > 40). These innovative materials can be used especially for clothing or outdoor textiles for which resistance to microorganisms is required, as well as to protect people who are exposed to long-term, harmful effects of UV radiation.     

Development of a new analytical method for online simultaneous qualitative determination of aluminium (free aluminium ion, aluminium-fluoride complexes) by HPLC-FAAS

The paper presents a novel method for simultaneous online examination of inorganic forms of aluminium: AlF₂⁺, AlF^2+, and Al³⁺ by means of the high performance liquid chromatography hyphenated with a detection by the atomic absorption spectrometry with flame atomization (HPLC-FAAS) without post-column reaction. The application of optimization procedure conditions of chromatographic separation of inorganic forms of aluminium was achieved by the analytical column IonPac CS5A (Dionex) with guard column IonPac CG5A (Dionex) and an aqueous ammonium chloride mobile phase, at pH about 3 with gradient elution. The separation of Al forms with nominal charge of 1+, 2+, 3+ required a run time of less than 8 min during a single analysis. The proposed method has been successfully used for the examination of aluminium forms formation AlF_n⁽³⁻ⁿ⁾⁺ in environmental samples.     

Benchmarking the ACEnano Toolbox for Characterisation of Nanoparticle Size and Concentration by Interlaboratory Comparisons

ACEnano is an EU-funded project which aims at developing, optimising and validating methods for the detection and characterisation of nanomaterials (NMs) in increasingly complex matrices to improve confidence in the results and support their use in regulation. Within this project, several interlaboratory comparisons (ILCs) for the determination of particle size and concentration have been organised to benchmark existing analytical methods. In this paper the results of a number of these ILCs for the characterisation of NMs are presented and discussed. The results of the analyses of pristine well-defined particles such as 60 nm Au NMs in a simple aqueous suspension showed that laboratories are well capable of determining the sizes of these particles. The analysis of particles in complex matrices or formulations such as consumer products resulted in larger variations in particle sizes within technologies and clear differences in capability between techniques. Sunscreen lotion sample analysis by laboratories using spICP-MS and TEM/SEM identified and confirmed the TiO₂ particles as being nanoscale and compliant with the EU definition of an NM for regulatory purposes. In a toothpaste sample orthogonal results by PTA, spICP-MS and TEM/SEM agreed and stated the TiO₂ particles as not fitting the EU definition of an NM. In general, from the results of these ILCs we conclude that laboratories are well capable of determining particle sizes of NM, even in fairly complex formulations.     

ICP slurry introduction for simple and rapid determination of Pb, Mg and Ca in plant roots

Pb, Mg and Ca were simultaneously determined in plant roots by slurry introduction into inductively coupled plasma optical emission spectrometry (SS-ICP-OES). Slurries were prepared in 0.5% or 5% (v/v) HNO₃ with 0.5, or 5% (v/v) Triton X-100. Omission of the Triton X-100 improved results. Compared with wet ashing of the root sample followed by ICP-OES, ICP-MS and FAAS, the method offers: comparable results, simplification of sample preparation, less sample contamination, and reduction in the use of dangerous and corrosive reagents. The precisions varied: 1.7% for Mg, 2.8% for Ca and 4.3% for Pb, and were not significantly different (95% confidence level) from those of conventional analysis.      

Calcification of aortic human valves studied in situ by Raman microimaging: following mineralization from small grains to big deposits

A Raman microimaging‐based approach has been used in the current study to evaluate formation and progression of calcification in situ in human stenotic aortic valves obtained during surgical valve replacement. The capability of the method to visualize distribution of the calcified deposits resulted in structural characterization of deposits in the various phases of development. A high spatial resolution of the method along with the confocal depth profiling enabled to identify extremely small salt inclusions (of ca. 0.5 µm in diameter), formed probably at the very early stage of calcification. Structurally, these inclusions are built from an octacalcium phosphate‐like compound that during grains' growth transforms into tricalcium phosphate, mixed with the salt containing the acidic phosphate groups (HPO₄²⁻) and, finally, into stable B‐type hydroxyapatite that is the only salt present in large‐area calcium salt deposits. Copyright © 2013 John Wiley & Sons, Ltd.