Poly(ionic liquid)s derived from 3‐octyl‐1‐vinylimidazolium bromide and N‐isopropylacrylamide with tunable properties

A new series of linear and crosslinked copolymers, obtained from 3‐octyl‐1‐vinylimidazolium bromide (VImBr) and N‐isopropylacrylamide (NIPAAm), were prepared by radical polymerization. Namely, VImBr was synthesized from 1‐bromooctane and an ionic liquid such as 1‐vinylimidazole. NIPAAm was used because it gives raise to well known thermoresponsive (co‐)polymers. The copolymers were thoroughly characterized by means of ¹H NMR and ¹³C NMR spectroscopies. Besides, differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy were also used. Moreover, the swelling behavior and the thermoresponsive properties of the corresponding hydrogels were studied. It was found that the VImBr incorporation into the copolymers does have a dramatic influence on both the thermal properties of the dried materials and the lower critical solution temperature of the corresponding hydrogels. In detail, the glass transition temperature was dependent on the monomer ratios, and ranged from 5 to 155 °C. Analogously, the lower critical solution temperature of the resulting hydrogels ranged from less than 10 up to 38 °C, thus including the physiological temperature. NMR spectroscopies, which were performed on the linear polymers, indicated that the monomers exhibit an alternating tendency resulting in a microstructure in which blocks are not present, at least when the two monomers are in equimolar amounts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3521–3532     

Effect of limonene on the frontal ring opening metathesis polymerization of dicyclopentadiene

The frontal ring opening metathesis polymerization (FROMP) of dicyclopentadiene (DCPD) in the presence of limonene, using second generation Grubbs’ catalysts, is reported. The effect of limonene on the amount of catalyst and the typical frontal polymerization parameters, as maximum temperature (T_max) and velocity of the front (V_f), is studied. In addition, the influence of limonene on the mechanical properties of the polymeric samples is reported. Finally, a deep study on the swelling properties of polymers is done. It has been demonstrated that limonene acts as both inhibitor and solvent of the catalyst. The T_max, V_f, T_g, and Young modulus values decrease as the amount of limonene increases, and the polymer samples swell in THF depending on the amount of limonene. All results indicate that the limonene addition on FROMP of results in advantages on the polymerization reaction and its parameters and on the final polymer properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 63–68     

Synthesis and characterization of graphene‐containing thermoresponsive nanocomposite hydrogels of poly(N‐vinylcaprolactam) prepared by frontal polymerization

Thermoresponsive poly(N‐vinylcaprolactam) nanocomposite hydrogels containing graphene were successfully prepared by frontal polymerization. High concentration of graphene (5.0 mg/mL) was obtained by direct graphite sonication in the self‐same liquid monomer, thus avoiding any chemical manipulation and obtaining “real” graphene as nanofiller instead of one of its more or less oxidized derivative, which is what generally reported in published reports. Furthermore, the corresponding nanocomposites were obtained without using any solvent to be eventually removed. The materials were fully characterized by RAMAN, SEM, and TEM, and their swelling behavior and rheological properties were investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thermoresponsive super water absorbent hydrogels prepared by frontal polymerization

Frontal polymerization was used as an alternative technique for the preparation of super water absorbent hydrogels obtained from acrylamide and 3‐sulfopropyl acrylate, potassium salt (SPAK) in the presence of N,N′‐methylene‐bisacrylamide as a crosslinker. All samples were synthesized in dimethyl sulfoxide, and their swelling behavior in water was investigated. It was found that their features are dependent on the monomer ratio used, which influenced the porous morphology, and consequently, the swelling capability. The swelling ratio ranges from about 1000% for the acrylamide homopolymer up to 14,000% for the sample containing 87.5 mol % of SPAK, thus indicating that this parameter can be easily tuned by using the appropriate monomer ratio. The affinity towards water was eventually confirmed by contact angle analysis. Polymer hydrogels made from at least 62.5 mol % SPAK exhibit a thermoresponsive behavior, with a lower critical solution temperature of ～30 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2486–2490, 2010     

Polymeric nanocomposites containing polyhedral oligomeric silsesquioxanes prepared via frontal polymerization

Frontal polymerization (FP) has been successfully applied, for the first time, to obtain polymeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) in an amine‐cured epoxy matrix. Variations of maximum temperature (T_max) and front velocity (V_f) have been studied. A comparison of these products with the corresponding materials, obtained by the classical batch polymerization technique, demonstrated that FP allows a higher degree of conversion than batch polymerization. The products have been characterized in terms of their thermal behavior with DSC analysis. SEM and X‐ray analyses revealed the morphology and the structures of the nanocomposites. The nanocomposites obtained by FP have the same characteristics of those synthesized, in much longer times, by batch polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4514–4521, 2007     

Synthesis and characterization of graphene-based nanocomposites with potential use for biomedical applications

In this paper, GaN nanoparticles were synthesized from the complex Ga(H₂NCONH₂)₆Cl₃ in the flow of NH₃ at a mild temperature (350 °C). Further purification was performed by the ethanol-thermal method. The ethanol-thermal method also prompted the GaN nanoparticles to grow into an anisotropic morphology. XRD patterns reveal that GaN nanoparticles have crystallized in a hexagonal wurtzite structure. TEM observation shows that the average size of the as-prepared nanoparticles is about 5–10 nm. The photoluminescence spectrum exhibits a broad green emission band with a peak at 510 nm. It can be known from the first-principle theoretic simulation by the TDDFT method that this fluorescence emission band is attributed to the hydride defects of V _N-H on the surface of GaN nanoparticles.     

Stimuli‐responsive polymer hydrogels containing partially exfoliated graphite

In this work, a new stimuli‐responsive composite polymer hydrogel containing partially exfoliated graphite was prepared by frontal polymerization. The materials obtained were characterized by differential scanning calorimetry, RAMAN, scan electron microscopy, transmission electron microscopy, atomic force microscopy, and in terms of swelling behavior. It was found that the maximum temperature reached by the polymerization front and the lower critical solution temperature are affected by the graphite content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010