Inclusive measure of |<Emphasis Type="Italic">V</Emphasis><Subscript><Emphasis Type="Italic">ub</Emphasis></Subscript>| with the analytic coupling model

By analyzing B→X _u ℓ ν _ℓ spectra with a model based on soft-gluon resummation and an analytic time-like QCD coupling, we obtain

Mechanochemical activation of minerals on the cordierite synthesis

The cordierite is commonly prepared by reaction of talc, clay and gibbsite within the range of 1200-1350 °C. This study deals with the effect of the amorphization by grinding of that mixture and its influence on the cordierite formation.The mixture previously mentioned underwent six different treatments: mixing without grinding (A) (only mixing); non-amorphizing grinding (A_M) and amorphizing grinding in oscillating mill at four different times (H samples). The phases formed by thermal treatment were studied using differential thermal analysis (DTA)-thermogravimetric analysis (TG)-DTG, dilatometries and X-ray diffraction (XRD) techniques in certain combinations.The thermal analysis of the A and A_M series were compared and they do not show significant differences, whereas the H samples present remarkable alterations in the DTA peaks as well as in the weight losses (TG). Thus, a great number of DTA peaks tend to decrease the temperature of the maximum and to lower the intensity as the amorphization time increases.Calcination tests performed within the range 900-1200 °C show important differences in the diffractograms obtained from the intermediate products. While at 1350 °C the A and H samples reach the same final phases, within the range 1200-1360 °C they present important differences in the DTA indicating that the sequence and direction of reaction are different. The same behavior can be observed by dilatometric analysis.     

Shape resonances in slow electron scattering by aromatic molecules. I. Anthraquinone derivatives

A series of anthraquinone (C(14)O(2)H(8)) derivatives has been studied by means of electron capture negative ion mass spectrometry (ECNI-MS), photoelectron spectroscopy (PES), and AM1 quantum chemical calculations. Mean lifetimes of molecular negative ions M(-.) (MNI) have been measured. The mechanism of long-lived MNI formation in the epithermal energy region of incident electrons has been investigated. A simple model of a molecule (a spherical potential well with the repulsive centrifugal term) has been applied for the analysis of the energy dependence of cross sections at the first stage of the electron capture process. It has been shown that a temporary resonance of MNI at the energy approximately 0.5 eV corresponds to a shape resonance with lifetime 1-2.10(-13) s in the f-partial wave (l = 3) of the incident electron. The next resonant state of MNI at the energy approximately 1.7 eV has been associated with the electron excited Feshbach resonance (whose parent state is a triplet npi* transition). In all cases the initial electron state of the MNI relaxes into the ground state by means of a radiationless transition, and the final state of the MNI is a nuclear excited resonance with a lifetime measurable on the mass spectrometry timescale. Copyright 1999 John Wiley & Sons, Ltd.     

A finite element formulation for global linear stability analysis of a nominally two‐dimensional base flow

A stabilized finite element method, to carry out the linear stability analysis of a two‐dimensional base flow to three‐dimensional perturbations that are periodic along span, is presented. The resulting equations for the time evolution of the disturbance requires a solution to the generalized eigenvalue problem. The analysis is global in nature and is also applicable to non‐parallel flows. Equal‐order‐interpolation functions for velocity and pressure are utilized. Stabilization terms are added to the Galerkin formulation to admit the use of equal‐order‐interpolation functions and to eliminate node‐to‐node oscillations that might arise in advection‐dominated flows. The proposed formulation is tested on two flow problems. First, the mode transitions in the circular Couette flow are investigated. Two scenarios are considered. In the first one, the outer cylinder is at rest, while the inner one spins. Two linearly unstable modes are identified. The primary mode is real and represents the axisymmetric Taylor vortices. The second mode is complex and consists of spiral vortices. For the counter‐rotating cylinders, the primary transition is via the appearance of spiral vortices. Excellent agreement with results from earlier studies is observed. The formulation is also utilized to investigate the parallel and oblique modes of vortex shedding past a cylinder for the Re = 100 flow. It is found that the flow is associated with a large number of unstable oblique shedding modes. The parallel mode of vortex shedding is a special case of this family of modes and is associated with the largest growth rate. Copyright © 2014 John Wiley & Sons, Ltd.     

Comment on resummation of mass distribution for jets initiated by massive quarks

We compute in the heavy quark effective theory the soft coefficient D₂ entering the resummation of next-to-next-to-leading threshold logarithms for jets initiated by a quark with a small mass compared to the hard scale of the process. We find complete agreement with a previous computation in full QCD. Contrary to our previous guess, this coefficient turns out to be different from that one entering heavy flavor decay or heavy flavor fragmentation.     

Comparison of structural response and fatigue endurance of aircraft flap-like box structures subjected to acoustic loading

The results of an extensive test program to characterize the behavior of typical aircraft structures under acoustic loading and to establish their fatigue endurance are presented. The structures tested were the three flap-like box-type of structures. Each structure consisted of one flat (bottom) and one curved (top) stiffener stiffened skin panel, front, and rear spars, and ribs that divided the structures into three bays. The three structures, constructed from three different materials (aircraft standard aluminum alloy, Carbon Fibre Reinforced Plastic, and a Glass Fibre Metal Laminate, i.e., GLARE) had the same size and configuration, with only minor differences due to the use of different materials. A first set of acoustic tests with excitations of intensity ranging from 140 to 160 dB were carried out to obtain detailed data on the dynamic response of the three structures. The FE analysis of the structures is also briefly described and the results compared with the experimental data. The fatigue endurance of the structures was then determined using random acoustic excitation with an overall sound pressure level of 161 dB, and details of crack propagation are reported.     

Influence of the zirconia transformation on the thermal behavior of zircon–zirconia composites

During a heating?Ccooling cycle, zirconia (ZrO₂) undergoes a martensitic transformation from monoclinic to tetragonal structure phases, which presents special hysteresis loop in the dilatometry curve at temperatures between 800 and 1100?°C. Monoclinic zirconia (m-ZrO₂) particles reinforced ceramic matrix composites not always present this behavior. In order to elucidate this fact a series of zircon?Czirconia (ZrSiO₄?CZrO₂) ceramic composites have been obtained by slip casting and characterized. The final properties were also correlated with the zirconia content (0?C30?vol.%). The influence of the martensitic transformation (m?Ct) in well-dispersed zirconia grains ceramic composite on the thermal behavior was analyzed. Thermal behavior evaluation was carried out; the correlation between the thermal expansion coefficients with the zirconia content showed a deviation from the mixing rule applied. A hysteresis loop was observed in the reversible dilatometric curve of composites with enough zirconia grains (??10?vol.%). Over this threshold the zirconia content is correlated with the loop area. The transformation temperatures were evaluated and correlated with the zirconia addition. When detected the m?Ct temperature transformation is slightly influenced by the zirconia content (due to the previously evaluated decrease in the material stiffness) and similar to the temperature reported in literature. The reverse (cooling) transformation temperature is strongly decreased by the ceramic matrix. The DTA results are consistent with the dilatometric analysis, but this technique showed more reliable results. Particularly the endothermic m?Ct transformation temperature showed to be easily detected even when the only m-ZrO₂ present was the product of the slight thermal dissociation of the zircon during the processing of the pure zircon material.