Solid Lipid Nanoparticles (SLNs): Preparation and Properties of Calix[4]resorcinarene Derived Systems.

Solid Lipid Nanoparticles (SLNs) have been prepared fromc-2,c-8,c-14,c-20-tetraundecyl-4,6,10,12,16,18,22,24-octahydroxyresorc[4]areneas colloidal suspensions. Photon Correlation Spectroscopy studies revealed aparticle hydrodynamic diameter of 150 nm. Non-contact mode Atomic ForceMicroscopy allows observation of the particles as slightly flattened sphericalobjects of 236 (±40) nm diameter and 145 (±40) nm height. Thestudy of the preparation parameters showed that shear force does not affectthe hydrodynamic size of the SLNs. In contrast, the viscosity and the pH ofthe aqueous phase, the amphiphile concentration in the organic phase and thevolume of organic phase used, all lead to variation in the size of the particles.In term of post preparation parameters only the ionic strength has been shownto affect significantly the particle size; while the pH of the storing solution,microwave, ultrasonic and thermal treatments do not. Short and long-termstability studies have been performed to measure the effect of the ionic strengthon the stability of the particles. The use of carbohydrate cryoprotectants does notallow re-dispersion of the colloidal suspension after freeze-drying.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Preparation of diverse BODIPY diesters

The synthesis and properties of a variety of substituted BODIPY diesters is presented. We find that certain substitution patterns afford appreciable yields of the target compounds and that electronic effects result in predicable differential fluorescent behavior. Challenges to further water solubilize these dyes and/or provide new points of attachment for biological tagging remain, these strategies are discussed.     

Light Energy Collection in a Porphyrin–Imide–Corrole Ensemble

An assembly consisting of three units, that is, a meso‐substituted corrole ( C3 ), 1,8 naphthaleneimide ( NIE ), and a Zn porphyrin ( ZnP ), has been synthesized. NIE is connected to C3 through a 1,3‐phenylene bridge and to the ZnP unit through a direct C? C bond. The convergent synthetic strategy includes the preparation of a trans‐A₂B‐corrole possessing the imide unit, followed by Sonogashira coupling with a meso‐substituted A₃B‐porphyrin. The photophysical processes in the resulting triad ZnP-NIE-C3 are examined and compared with those of the corresponding C3-NIE dyad and the constituent reference models C3 , NIE , and ZnP . Excitation of the NIE unit in C3-NIE leads to a fast energy transfer of 98 % efficiency to C3 with a rate k_en=7.5×10¹⁰ s^?1, whereas excitation of the corrole unit leads to a reactivity of the excited state identical to that of the model C3 , with a deactivation rate to the ground state k=2.5×10⁸ s^?1. Energy transfer to C3 and to ZnP moieties follows excitation of NIE in the triad ZnP-NIE-C3 . The rates are k_en=7.5×10¹⁰ s^?1 and k_en=2.5×10¹⁰ s^?1 for the sensitization of the C3 and ZnP unit, respectively. The light energy transferred from NIE to Zn porphyrin unit is ultimately funneled to the corrole component, which is the final recipient of the excitation energy absorbed by the different components of the array. The latter process occurs with a rate k_en=3.4×10⁹ s^?1 and 89 % efficiency. Energy transfer processes take place in all cases by a Förster (dipole–dipole) mechanism. The theory predicts quite satisfactorily the rate for the ZnP/C3 couple, where components are separated by about 23 Å, but results in calculated rates that are one to two orders of magnitude higher for the couples NIE/ZnP (D/A) and NIE/C3, which are separated by distances of about 14 and 10 Å, respectively.     

Columnar bis(pyridinium) ionic liquid crystals derived from 4-hydroxypyridine: synthesis,mesomorphism and emission properties

A series of flexibly linked bis(pyridinium) salts with various counterions (Br^?, PF₆^?, BF₄^? and OTf-) was designed and prepared starting from corresponding N-alkylated 4-pyridones precursors with mesogenic 3,4,5-tris(alkyloxy)benzyl moieties (alkyl = dodecyl or tetradecyl). These salts were investigated for their liquid crystalline properties by a combination of differential scanning calorimetry, polarising optical microscopy and temperature-dependent powder X-ray diffraction (XRD). Their thermal stability was checked by thermogravimetric analysis. All bis(pyridinium) salts, except the triflate salt with shorter terminal carbon chain, display an enantiotropic liquid crystalline behaviour with a hexagonal columnar (Col_h) phase assigned on the basis of its characteristic texture and XRD studies. It was found that these luminescent bis(pyridinium) salts show weak emission in dichloromethane solutions at room temperature and a pronounced red-shifted emission in solid state. The emission properties of these bis(pyridinium) salts do not depend significantly on the nature of counterion employed.     

Polyethylene glycol as a non-ionic liquid solvent for polyoxometalate catalyzed aerobic oxidation

The H5PV2Mo10O40 polyoxometalate in a polyethylene glycol solvent was effective for a series of aerobic oxidation reactions including oxydehydrogenation of alcohols and cyclic dienes, oxidation of sulfides and the Wacker reaction; the solvent-catalyst phase can be recovered and recycled.     

The ν1 and ν4 fundamental bands of H3SiCl investigated with high resolution

The gas phase infrared spectrum of monoisotopic H₃Si³⁷Cl has been reinvestigated in the ν₁/ν₄ region near 2200 cm⁻¹, using a Fourier transform spectrometer, with a nominal resolution of 0.0027 cm⁻¹. The rovibrational analysis confirms, besides the weak Coriolis x, y resonance between the (v₁ = 1) and (v₄ = 1) levels, the existence of two strong local perturbations in the ν₄ band. These are caused by rotational (Δk = Δl = ±1) type resonances with and , respectively. Another local perturbation of the 12 ? KΔK ? 14 subbands of the ν₄ band, probably due to a (Δk = Δl = ±1) interaction with , was detected and analyzed. All these local perturbations have been studied individually using a simple model of two interacting sublevels. Without the transitions involved in the local perturbations, more than 2000 lines of the ν₁/ν₄ band system were used to obtain a complete set of vibration-rotation parameters set for the v₁ = 1 and v₄ = 1 states. By means of a band contour simulation, both the transition moment ratio ∣M₄:M₁∣ = 1.25 and a positive sign of the Coriolis intensity perturbation were determined.The present results, together with the accurate existing data for ν₂, ν₃, ν₅, and ν₆ bands, allowed us to derive the experimental values, A_e = 2.8722945(37) cm⁻¹ and B_e = 0.2182248(22) cm⁻¹, which are compared with those of ab initio calculations.     

Perron Conditions for Pointwise and Global Exponential Dichotomy of Linear Skew-Product Flows

The aim of this paper is to give necessary and sufficient conditions for pointwise and uniform exponential dichotomy of linear skew-product flows. We shall obtain that the pointwise exponential dichotomy of a linear skew-product flow is equivalent to the pointwise admissibility of the pair As a consequence, we prove that a linear skew-product flow on is uniformly exponentially dichotomic if and only if the pair is uniformly admissible for .     

Exponential Expansiveness and Complete Admissibility For Evolution Families

Connections between uniform exponential expansiveness and complete admissibility of the pair are studied. A discrete version for a theorem due to Van Minh, Räbiger and Schnaubelt is presented. Equivalent characterizations of Perron type for uniform exponential expansiveness of evolution families in terms of complete admissibility are given.     

Interpolation operators on a triangle with one curved side

We construct certain Lagrange, Hermite and Birkhoff-type operators, which interpolate a given function and some of its derivatives on the border of a triangle with one curved side, as well as some of their product and Boolean sum operators. We study the interpolation properties and the order of accuracy (degree of exactness and precision set) of the constructed operators, respectively the remainders of the corresponding interpolation formulas. Finally, we give some numerical examples.