Preparation of MgB<Subscript>2</Subscript>/Fe superconductor wire by electrical self-heating

MgB₂/Fe wires were prepared by electrical self-heating of in situ powder-in-tube wires for the first time at ambient conditions. Characterization of the wires processed at 750 °C, 800 °C and 850 °C for 15 min by XRD, SEM, ϱ–T, susceptibility and J_C measurements shows that the MgB₂ formed is of high quality particularly with respect to phase purity and transport J_C. The method considerably reduces the overall energy consumption vis-à-vis the production cost, simplifies the complexity of the fabrication procedure and is promising for manufacture of high-quality MgB₂ superconducting wires. PACS 74.70.Ad; 74.62.Bf; 74.25.Fy; 74.25.Ha; 81.20.Hy     

Gamma ray photon-induced modifications in Triafol-TN and Triafol-BN polymeric track detectors

Photon induced modifications in Triafol-TN and Triafol-BN polymers have been studied in the dose range of 10¹–10⁶ Gy at room temperature using a ⁶⁰Co source. To monitor the chemical and structural changes induced by gamma rays, UV, IR, and ESR studies were carried out. Thermal studies were also conducted for understanding the effects of gamma irradiations on these polymers. Variation of track etching characteristics and activation energy for bulk etching have been studied at different gamma rays doses. The experimental results are presented and discussed.     

Carbon thin films through laser ablation

Thin carbon films were deposited on silicon substrates at room temperature using a 0.355 μm Nd:YAG laser wavelength at low irradiance in the presence of argon gas. Various techniques including scanning electron microscopy, X-ray diffraction and Raman spectroscopy were used to analyze the film quality. The influence of the argon gas pressure on the properties of the films is demonstrated and a correlation with the optical emission data is presented.     

Parametric Excitation of the Electron-Acoustic Wave in a Multiply Ionized Plasma

Parametric excitation of the electron-acoustic wave (EAW) has been analysed using a hydrodynamical model. The plasma has been assumed to consist of multiply charged ions. The ratio (α) of the hotter ion concentration to that of the electrons is a sensitive parameter. The condition for the occurrence of the EAW is well satisfied for the smaller values of α. The growth rate of the instability gets enhanced by increasing α and the charge state of the hotter ions. The values of α can be varied within short range only.     

An integrated approach to the complete chemical analysis of magnesium or sodium diuranate (yellow cake) sample

A procedure for the complete chemical analysis of magnesium or sodium diuranate (yellow cake) sample is reported. Uranium is determined gravimetrically after peroxide precipitation. Optimum parameters, such as pH, quantity of hydrogen peroxide, volume of sample, temperature and complexing agent for quantitave precipitation of uranium, and effective separation of other elements were studied. Aluminum, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, and Zn were determined by flame atomic absorption spectrometer and B, Mo, SO₄, REEs and Y by inductively coupled plasma atomic emission spectrometer in the filtrates of hydroxide and peroxide precipitation separation. The proposed method is accurate and the precision is characterized by an RSD of ~0.2% for U; 2 to 6% for Mg, Na, K, Ca, Fe, SiO₂, Al, Cd, Co, Cr, Fe, Mn, Ni, Pb, and Zn and 3 to7% for REEs, Y, Mo and B     

Laser induced breakdown of Ar,N2 and O2 gases using 1.064, 0.532, 0.355 and 0.266 μm radiation

An experimental investigation of laser-induced breakdown using Nd:YAG laser harmonics for argon, nitrogen and oxygen gases is reported. Pressure dependence as well as wavelength dependence of the breakdown threshold irradianceI _th is investigated. The experimental observations for 1.064 and 0.532 m laser wavelengths are in agreement with theoretical calculations which include the effects of multiphoton ionization and cascade ionization.     

A novel three-component reaction for the diastereoselective synthesis of 2H-pyrimido[2,1-a]isoquinolines via 1,4-dipolar cycloaddition

[reaction: see text] The 1,4-dipole derived from isoquinoline and DMAD has been shown to react readily with N-tosylimines resulting in the diastereoselective synthesis of 2H-pyrimido[2,1-a]isoquinoline derivatives.     

A study of equilibrium between cadmium cyanide and alkali halides and thiocyanate by solubility measurements

Summary A study of the Cd(CN)₂ +x X^– [Cd(CN)₂X _x ] ^x– equilibrium (where X = Cl, Br or CNS) has been carried out at 18° and 38° by measuring the solubility of cadmium cyanide in potassium chloride, bromide and thiocyanate at various concentrations, and at a high ionic strength (6 M) maintained with sodium perchlorate to minimise the effect of activity coefficients. Equilibrium constants forx = 1 and 2 have been calculated and clearly favour the situation wherex = 1. H values for the dissociation of [Cd(CN)₂X]^– have also been calculated.     

Photometric determination of trivalent gallium,indium and thallium with Xylenol orange

Summary Xylenol orange reacts very sensitively with gallium(III), indium (III) and thallium(III) to form reddish violet colored chelates having _max 560 nm in case of Ga and In and _max 590 nm in case of Ti at P_H 4.0. The molar ratio for all the chelates is 1 1 (metal reagent). Optimum conditions including the range for adherence to Beer's law, effect of P_H on the color intensity, effect of excess reagent, and sensitivity are reported for the photometric determination of these metal ions using Xylenol orange.

---

Zusammenfassung Xylenolorange reagiert sehr empfindlich mit Gallium(III), Indium(III) und Thallium(III) unter Bildung rötlich-violetter Chelate mit einem Absorptionsmaximum bei 560 nm im Falle von Ga und In bzw. 590 nm für Tl bei p_H 4,0. Das Molverhältnis ist in jedem Fall 11. Die besten Arbeitsbedingungen, der Gültigkeitsbereich des Beerschen Gesetzes, der Einfluß des P_H auf die Farbintensität und des Reagensüberschusses sowie die Empfindlichkeit werden für die photometrische Bestimmung der genannten Ionen angegeben.