用脉冲激光同轴全息技术测量微射流

强冲击载荷下自由表面的粒子喷射现象还没有被清楚认识，很难从理论上给以准确的计算模型，因而从实验测定材料在冲击载荷下自由面面喷射物质的分布和粒子尺寸大小就显得非常重要。测量微粒场的脉冲激光同轴全息技术，具有在纳秒或更在短时间内“固化”运动微粒场、测量精度高、景深长、光路简单和获得的信息量大等优点。这些优势使得脉冲激光同轴全息技术成为研究微喷射场的重要测试手段之一。     

Influences of Thalliation on the Morphology and Critical Temperature of Tl2Ba2CaCu2O8 Thin Films

Tl2Ba2CaCu2Ox(Tl-2212) thin films were prepared by the two-step technique.A precursor film was first prepared by the pulsed laser deposition method,and then experienced the incorporation of thalliation in a one-step or two-step annealing process.The experimental results show that the two-step annealing process produces dense and smooth films,and that the one-step annealing process produces a high critical temperature film of 101K,but the transition width is wide.Precursor films with homogeneous Ba2Ca1.3Cu2.1Ox composition are essential for producing high-quality Tl-2212 films.     

Excitation Properties of the Biological Neurons with Side-Inhibition Mechanism in Small-World Networks

We have studied the excitation properties of biophysical Hodgkin-Huxley neurons with the side-inhibition mechanism in small-world networks. The result shows that the excitation properties in the networks are preferably consistent with the characteristic properties of a brain neural system under external constant stimuli, such as fatigue effect, extreme excitation principle, and the brain neural excitation response induced by different in- tensity of noise and coupling. The results of the study might shed some light on the study of the brain nerve electrophysiology and epistemological science.     

High temperature superconducting thin films for microwave filters

YBa₂Cu₃O_7-δ and Tl₂Ba₂CaCu₂O₈ thin films for microwave filters were synthesized by pulsed laser deposition and the two-step thalliation process. Substrate quality requirements and the relation of thin film morphology, microstructure with microwave surface resistance were discussed.     

A Two-Dimensional Photonic Crystal Slab Mirror with Silicon on Insulator for Wavelength 1.3μm

A concrete two-dimensional photonic crystal slab with triangular lattice used as a mirror for the light at wavelength 1.3μm with a silicon-on-insulator （SOI） substrate is designed by the three-dimensional plane wave expansion method. For TE-like modes, the bandgap in the Г-K direction is from 1087nm to 1559nm. The central wavelength in the bandgap is about 1.3μm, hence the incident light at wavelength 1.3μm will be strongly reflected. Experimentally, such a photonic crystal slab is fabricated on an SOI substrate by the combination of EBL and ICP etching. The measurement of its transmission characteristics shows the bandgap edge in a longer wavelength is about 1540 nm. The little discrepancy between the experimental data and the theoretical values is mainly due to the size discrepancy of the fabricated air holes.     

Average Property of Isospin Effects Induced by Neutron-Halo Nuclei

We study the average property of the isospin effects of reaction mechanism induced by neutron-halo nuclei within the isospin-dependent quantum molecular dynamics model. We find that the extended neutron density distribution for the neutron-halo projectile brings an important isospin effect into the reaction mechanism, which induces the decrease of nuclear stopping R; however, it induces the obvious increases of the neutron-proton ratio of nucleon emissions （n/p）nucl for all of the beam energies in this work, compared to the same mass stable colliding system.     

镉(Ⅱ)与对苯二甲酸和2,2''''-联吡啶配合物光谱性质的理论研究

对镉(Ⅱ)与对苯二甲酸和2,2'-联吡啶配合物进行几何优化,在优化构型的基础上分析了其吸收光谱.结果表明主要贡献的激发态为16,17和26激发态而不是第一激发态,振子强度f为0.205 2,0.320 2和0.323 4,对应的吸收波长为308.57,307.33和258.35 nm,与实验值310和253 nm相近.     

计算机Monte Carlo法模拟自由基交联共聚网络结构的增长

本文成功地用MonteCarlo方法模拟了以画面方式表示的苯乙烯-二乙烯苯交联共聚反应中大分子链增长、支化及交联的进化情况，并给出了相应的转化率，以定量模型的方式描述了该类反应。     

高分子凝胶化反应的分形几何分析

据分形理论,基于实验基础上,进行了高分子凝胶化反应的分形几何行为分析,以苯乙烯-二乙烯苯凝胶化反应为例,分别由激光及小角x-光散射测定其反应中大分子重量、尺寸及散射光强角度依赖性,来定量描述化学反应及分析体系的分形行为和测定分数维D值.这种避开各种复杂的凝胶化理论,立足于现代物理技术及新理论,去剖析高分子凝胶化反应的分形几何行为,能够在更本质的深度揭示这类复杂反应的规律.     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.