Singular variation property of elastic constants of piezoelectric ceramics shunted to negative capacitance

Piezoelectric shunt damping has been widely used in vibration suppression, sound absorption, noise elimination, etc.In such applications, the variant elastic constants of piezoelectric materials are the essential parameters that determine the performances of the systems, when piezoelectric materials are shunted to normal electrical elements, i.e., resistance,inductance and capacitance, as well as their combinations. In recent years, many researches have demonstrated that the wideband sound absorption or vibration suppression can be realized with piezoelectric materials shunted to negative capacitance. However, most systems using the negative-capacitance shunt circuits show their instabilities in the optimal condition, which are essentially caused by the singular variation properties of elastic constants of piezoelectric materials when shunted to negative capacitance. This paper aims at investigating the effects of negative-capacitance shunt circuits on elastic constants of a piezoelectric ceramic plate through theoretical analyses and experiments, which gives an rational explanation for why negative capacitance shunt circuit is prone to make structure instable. First, the relationships between the elastic constants c_(11), c_(33), c_(55) of the piezoelectric ceramic and the shunt negative capacitance are derived with the piezoelectric constitutive law theoretically. Then, an experimental setup is established to verify the theoretical results through observing the change of elastic constant c_(55) of the shunted piezoelectric plate with the variation of negative capacitance.The experimental results are in good agreement with the theoretical analyses, which reveals that the instability of the shunt damping system is essentially caused by the singular variation property of the elastic constants of piezoelectric material shunted to negative capacitance.     

Investigations of thickness-shear mode elastic constant and damping of shunted piezoelectric materials with a coupling resonator

Shear-mode piezoelectric materials have been widely used to shunt the damping of vibrations where utilizing surface or interface shear stresses. The thick-shear mode(TSM) elastic constant and the mechanical loss factor can change correspondingly when piezoelectric materials are shunted to different electrical circuits. This phenomenon makes it possible to control the performance of a shear-mode piezoelectric damping system through designing the shunt circuit. However, due to the difficulties in directly measuring the TSM elastic constant and the mechanical loss factor of piezoelectric materials, the relationships between those parameters and the shunt circuits have rarely been investigated. In this paper, a coupling TSM electro–mechanical resonant system is proposed to indirectly measure the variations of the TSM elastic constant and the mechanical loss factor of piezoelectric materials. The main idea is to transform the variations of the TSM elastic constant and the mechanical loss factor into the changes of the easily observed resonant frequency and electrical quality factor of the coupling electro–mechanical resonator. Based on this model, the formular relationships are set up theoretically with Mason equivalent circuit method and they are validated with finite element(FE) analyses. Finally, a prototype of the coupling electro–mechanical resonator is fabricated with two shear-mode PZT5 A plates to investigate the TSM elastic constants and the mechanical loss factors of different circuit-shunted cases of the piezoelectric plate. Both the resonant frequency shifts and the bandwidth changes observed in experiments are in good consistence with the theoretical and FE analyses under the same shunt conditions. The proposed coupling resonator and the obtained relationships are validated with but not limited to PZT5 A.     

应用长度极化压电陶瓷33模态的 半主动减振技术研究*

本文提出利用长度方向极化的压电材料的33模态来实现半主动减振。论文以横梁为例,通过理论分析和有限元仿真,对比研究了当压电材料分别连接31, 33两种模态对应的最佳分流电路时,压电材料两种模态在横梁的共振频率附近的减振效果。结果表明33模态比31模态具有更高的减振效率。此外,鉴于33模态存在极化长度有限的问题,仿真分析了压电材料的尺寸和位置对减振效果的影响。在此基础之上,提出了一个利用压电材料33模态的多模态减振的组合设计,对横梁的前三个模态起到了很好地减振作用。相对31模态而言,横梁的每个振动模态均有约15dB的减振提升。