中子诱发232Th裂变初始碎片质量及动能分布Monte-Carlo研究

随着第四代反应堆以及先进核能利用系统的发展,对中子核数据提出了高精度、多核素、宽能区的新要求.目前,中国核数据评价库(CENDL库)中相关核裂变的数据较缺失,不足以满足当前核能发展的需求.因此,建立面向中子核数据需求的可靠计算方法和工具变得极为重要.本文基于Monte-Carlo方法建立了裂变碎片质量动能计算模型,研究了中低能中子诱发²³²Th(n,f)反应发射中子前裂变碎片的分布特性.对于裂变碎片质量分布,本模型计算结果与实验值最大偏差约1%,与GEF, TALYS程序计算结果 (与实验值最大偏差约2%)相比具有一定优势.对于发射中子前裂变碎片动能分布,本模型计算结果与实验数据一致.结果表明,所发展的计算模型能够较好地预测²³²Th(n,f)反应发射中子前裂变碎片数据,为中子诱发锕系核裂变反应计算提供一种新思路.     

Measurements of neutron energy spectra of 9Be(d,n)10B reaction with a thick beryllium target

Novel measurements of the neutron energy spectra of the 9Be(d,n)10B reaction with a thick beryllium target are performed using a fast neutron time-of-flight(TOF)spectrometer for the neutron emission angles θ=0°and 45°,and the incident deuteron energies are 250 and 300 keV,respectively.The neutron contributions from the 9Be(d,n)10B reaction are distributed relatively independently for the ground state and the first,second,and third excited states of 10B.The branching ratios of the 9Be(d,n)10B reaction for the different excited states of 10B are obtained for the neutron emission angles θ=0°and 45°,and the incident deuteron energies are 250 and 300 keV,respectively.The branching ratio of the 9Be(d,n)10B reaction for the third excited state decreases with increase in the incident deuteron energy,and the branching ratios for the ground state and the second excited state increase with increase in the neutron emission angle.     

厚靶低中能9Be(d,xn)反应加速器中子源特性研究

利用PHITS程序评价计算了厚靶9Be(d, xn)反应加速器中子源的能谱和角分布数据，重点讨论了JQMD、INCL和INCL/DWBA三种核反应物理模型计算厚靶9Be(d, xn)反应中子辐射场分布的适用性。研究结果显示，基于INCL/DWBA耦合模型的PHITS程序计算所得到的厚靶9Be(d, xn)反应中子能谱和角分布数据能够较好地与实验数据符合，可以为厚靶9Be(d, xn)反应中子源特性研究及应用提供较为准确的中子辐射场数据。此外，设计了水冷大面积旋转铍靶的方案，并在5~25 MeV/5 mA入射氘能量下条件下，开展了靶面温度模拟研究，结果显示，靶面最高温度可控制在100 oC以下。     

Monte Carlo simulation of fast neutron-induced fission of ~(237)Np

The potential-driving model is used to describe the driving potential distribution and to calculate the preneutron emission mass distributions for different incident energies in the ~(237) Np(n, f)reaction. The potential-driving model is implemented in Geant4 and used to calculate the fission-fragment yield distributions, kinetic energy distributions, fission neutron spectrum and the total nubar for the ~(237) Np(n, f)reaction. Compared with the built-in G4 ParaFissionModel, the calculated results from the potential-driving model are in better agreement with the experimental data and evaluated data. Given the good agreement with the experimental data, the potential-driving model in Geant4 can describe well the neutron-induced fission of actinide nuclei, which is very important for the study of neutron transmutation physics and the design of a transmutation system.     

基于微通道板的二维位置灵敏像探测器X射线成像研究

研制了一套基于微通道板的二维位置灵敏像探测器,开展了X射线成像实验研究。对游标卡尺构建的狭缝成像显示,狭缝图像清晰可见,图像的边缘分辨率能达到约500 μm。对组合样品进行了成像测试,在X射线机靶流为1 mA的条件下,像探测器系统在1 ms内即可实现成像,且成像结果清晰。采用中值滤波与锐化、盲反卷积、维纳滤波等方法,对游标卡尺的成像结果进行了初步的图像处理。结果显示,三种方法都能改善图像的质量,其中维纳滤波法效果最优,相比原图边缘分辨率提高了约7%。