破碎-絮凝法分离细长碳纳米管与碳纤维

根据碳纤维与细长碳纳米管耐磨性能与絮凝沉降性能的差异，提出了一种有效分离细长碳纳米管与碳纤维的物理方法——破碎-絮凝法.该方法包括研磨破碎、液相分散、絮凝沉降、过滤分离等步骤，可高效去除混杂于细长碳纳米管样品中的碳纤维，同时还可去除螺旋状碳纤维及细小碳颗粒等易悬浮杂质.纯化过程对细长碳纳米管无损伤.用电子显微镜和热重分析表征了纯化效果，并初步分析了纯化机理.     

应用裂解气相色谱对生物质快速裂解反应条件的研究

采用现代化学分析领域中重要的分析方法 -裂解气相色谱法 ,对生物质的快速裂解进行了探索性研究。以杨木木屑为研究对象 ,在裂解温度 40 0～ 80 0℃ ,升温速率 1 0 0℃ s、2 50℃ s、50 0℃ s,挥发性产物停留时间 0 6～4 0s的裂解条件下 ,考察了杨木木屑快速裂解气、液、固三种产物及气相组分的分布规律。实验结果表明 ,气、液、固三种产物所占比例及其组分含量取决于裂解条件 -裂解温度、挥发份停留时间和升温速率 ,杨木在升温速率50 0℃ s、挥发性产物停留时间 0 6s、裂解温度 50 0℃下快速裂解 ,可获得最大的产液率 80 % (含水 )。物料平衡的结果证明了裂解色谱研究方法的有效性和可行性。     

Synthesis of flower-like WS2 by chemical vapor deposition

Flower-like tungsten disulfide (WS₂) with a diameter of 5-10 μm is prepared by chemical vapor deposition (CVD). Scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), Raman spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy are used to characterize its morphological and optical properties, and its growth mechanism is discussed. The key factors for the formation of flower-like WS₂ are determined. Firstly, the cooling process causes the generation of nucleation dislocations, and then the "leaf" growth of flower-like WS₂ is achieved by increasing the temperature.     

碳纳米管的高温处理及表征

用真空高温炉对在纳米聚团流化床中用催化裂解法大批量制备的多壁碳纳米管进行了1500～2150℃的真空高温处理,并用高分辨透射电镜、激光拉曼、X射线晶体衍射及热重分析表征热处理效果.结果证明,高温处理对碳纳米管具有显著的整形作用,激光拉曼光谱可以有效地表征高温整形效果,但是管壁的大缺陷很难得到修复.经过1800℃处理以后,碳纳米管中的金属催化剂和载体得到有效去除,产品纯度高达99%以上.     

白光LED用稀土荧光粉的制备和性质

在还原气氛保护下利用高温固相法合成了化学组分为(M₁,M₂)₁₀(PO₄)₆X₂(M₁=Ca,Sr,Ba;M₂=Eu,Mn;X=F,Cl,Br)的可被紫光激发的蓝光、绿光和红光荧光粉,制备了紫光LED芯片+蓝光荧光粉+YAG荧光粉的二基色白光LED;紫光LED芯片+蓝光荧光粉+红光荧光粉的二基色白光LED,以及紫光LED芯片+蓝光荧光粉+绿光荧光粉+红光荧光粉的三基色白光LED。测试了所有制备的白光LED在不同的直流电驱动下的色度坐标、相关色温和显色指数。     

超导薄膜磁-热不稳定与强非线性电磁本构的关联性

常规导体的电磁本构关系一般满足线性欧姆定律,然而超导体的电磁本构关系呈现很强的非线性特征,所以与常规导体相比,超导有截然不同的电磁特性.本文基于超导材料E-J幂次律本构关系,采用快速傅里叶变换方法 (FFT),定量研究了不同环境温度、磁场加载速率以及临界电流密度条件下的超导薄膜磁-热不稳定性与非线性本构的关联性,揭示了强非线性电磁本构是导致超导薄膜磁-热不稳定性(呈现树状、指状磁通崩塌形貌)的重要因素,同时阐明了常规导体观测不到类似的磁-热不稳定现象的原因.另外发现由于超导薄膜抗磁性的增强导致超导薄膜边界磁场迅速增大,较大的磁压极易诱发磁通崩塌,所以超导薄膜内磁通崩塌阈值随幂指数的增加而降低.最后给出了n₀-j_c0和■平面内不同非线性程度下超导薄膜内磁热不稳定状态的分界线.     

Effect of metal nanoparticle doping concentration on surface morphology and field emission properties of nano-diamond films

Nano-diamond particles are co-deposited on Ti substrates with metal (Ti/Ni) nanoparticles (NPs) by the electrophoretic deposition (EPD) method combined with a furnace annealing at 800℃ under N₂ atmosphere. Modifications of structural and electron field emission (EFE) properties of the metal-doped films are investigated with different metal NPs concentrations. Our results show that the surface characteristics and EFE performances of the samples are first enhanced and then reduced with metal NPs concentration increasing. Both the Ti-doped and Ni-doped nano-diamond composite films exhibit optimal EFE and microstructural performances when the doping quantity is 5 mg. Remarkably enhanced EFE properties with a low turn-on field of 1.38 V/μm and a high current density of 1.32 mA/cm² at an applied field of 2.94 V/μm are achieved for Ni-doped nano-diamond films, and are superior to those for Ti-doped ones. The enhancement of the EFE properties for the Ti-doped films results from the formation of the TiC-network after annealing. However, the doping of electron-rich Ni NPs and formation of high conductive graphitic phase are considered to be the factor, which results in marvelous EFE properties for these Ni-doped nano-diamond films.     

SAPO-34上甲醇及二甲醚吸附等温线及吸附热测量与分析(英文)

在25,60和100°C下分别测定了甲醇及二甲醚在SAPO-34分子筛上的吸附等温线,同时用微量热法测定了微分吸附热与覆盖率的关系曲线(量热线),提出了吸附数据需要利用双吸附位Langmuir方程拟合,并获取了相应的吸附参数.对比测得的吸附等温线与量热线发现,在一定压力下,当甲醇及二甲醚在SAPO-34上达到一定吸附量后,随着吸附质分压增加,量热线快速下降,而吸附等温线显示出吸附量仍然继续增加.由此推断,在SAPO-34分子筛上存在两种吸附位——常规吸附位及弱吸附位,其中弱吸附位在高分压下继续吸附.如缺乏量热数据提供的常规吸附位饱和吸附量数据,对吸附等温线进行单吸附位拟合获取吸附参数极易导致错误结果,尤其是当吸附质分压较高时.建议采用双吸附位Langmuir方程,参照量热线提供的常规吸附位的饱和吸附量,通过拟合可以获得两种吸附位的吸附参数.     

Continuous-wave, single-frequency intracavity singly resonant optical parametric oscillator at 1.5-μm wavelength

We present a 1.5μm continuous-wave （CW） single-frequency intracavity singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO is placed inside the ring cavity of a single-frequency 1.06μm Nd：YVO4 laser pumped by a laser diode. The device delivers a maximum single-frequency output power of 310 mW at a resonant signal wavelength of 1.57 μm. The signal wave could be tuned from 1.57 to 1.59 μm by temperature tuning of PPLN crystal over the range of 130 - 170℃.     

淀粉-磺甲基化聚丙烯酰胺接枝共聚物的合成及性能

用淀粉-聚丙烯酰胺接枝共聚物(S-g-PAM)同多聚甲醛及亚硫酸钠反应,合成了淀粉-磺甲基化聚丙烯酰胺接枝共聚物(S-g-SPAM)。该磺化物的水溶液在试验浓度范围内(0.1～1.0％),为假塑性流体,对高岭土悬浮液的絮凝,由沉降速度,上层清液相对吸光度可知,S-g-SPAM(接枝链分子量为1.03×10⁵,磺甲基化度30％)的絮凝能力优于相应的未磺化的S-g-PAM,也比聚丙烯酰胺(分子量2.5×10⁶)强。