Light source system for high-precision flat-field correction and the calibration of an array detector

Signal distortion due to the non-uniform response of the detector degrades the measurement accuracy of most metrology instruments. In this Letter, we report a newly developed calibration source system for reference-based non-uniformity correction using a laser source, a fiber, and a diffusive module. By applying the Monte Carlo simulation, we show that the transmittance of the system highly depends on the cavity reflection of the diffusive module. We also demonstrate the use of this system to achieve a flat field at a very low non-uniformity(less than 0.2%) with proper illumination intensity, which most costly commercial integrating sphere systems traditionally cannot provide.     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

基于WLF方程的硬质聚氨酯泡沫塑料贮存寿命评估

硬质聚氨酯泡沫塑料是聚氨酯材料体系中最重要的品种之一，它是以聚氨酯树脂为基体，经发泡工艺制作而成的泡沫材料。由于硬质聚氨酯泡沫塑料在使用过程中有可能发生老化而导致其力学性能发生变化，因而老化性能的研究和贮存寿命的评估是硬质聚氨酯泡沫塑料的一个重要研究方向。     

四重键化合物M_2(CH_3)_8~(n-)中金属—金属键的性质

本文分析了四重键化合物M_2(CH_3)_8~(n-)(M=Mo,Tc,W,Re)中金属键的性质,并对金属原子的(n-1)f轨道参加成键的可能性进行了讨论.结果表明(n-1)f轨道参加成键使金属原子间π和δ电子的几率增加,并使总能量、π和δ成键轨道能量明显下降。因此,f轨道对金属四重键特别是π和δ键的影响是显著的。     

氢甲酰化反应溶剂效应的量子化学研究

在B3LYP/6-31G(d, p)(Rh和P采用LANL2DZ + Polar)水平下,利用自洽反应场（SCRF）的Onsager模型,系统研究了C6H12、C6H6、THF、CH2Cl2、CH3OH和H2O（相对介电常数ε分别为2.02、2.25、7.58、8.93、32.63和78.39）六种溶剂对乙烯氢甲酰化反应中各驻点的结构和反应机理的影响.分别在上述溶剂中优化了反应物、产物、中间体和过渡态的结构,并计算了自由能和活化自由能.计算结果表明,不同溶剂对反应势能面上各驻点的结构和能量均有一定的影响,而且随着相对介电常数ε的增加,反应的活化自由能下降.水是以上六种溶剂中最佳的溶剂,这与大量的实验研究结果一致.     

EPM法推测反应机理

ＥＰＭ法推测反应机理李明，文丽荣（新疆师范大学化学系８３００５３）在某些现行的有机教科书中，要求学生记忆的有机反应很多，但并没有强调这些反应为什么会发生？又是怎样发生的？尤其是遇到教科书以外的关于推测反应机理的问题时，更是束手无策，而这又是最重要的。...     

高温高压下β相硼的电导率测量

 硼在高压下具有复杂的结构和多样的物理性质,对其结构和性质的深入研究具有很重要的意义,一直引起理论和实验研究领域的关注。高压下进行电学性质测量是获得物质物理性质的有效手段,利用集成在金刚石对顶砧上的微电路,在高压下和两个不同温度范围内对β相硼进行了电导率测量,分析了导电机制随压力的变化规律。在0～28.1 GPa范围内,β相硼的电导率随着压力的增大是逐渐增大的,卸压后样品的电导率不能回到最初的状态,是一个不可逆的变化过程;由室温到423 K的范围内,β硼的电导率随着温度的不断增加有明显的上升趋势,并且随着压力的升高,电导率变化逐渐加快。此外,对样品在14.5 GPa和18.6 GPa压力下,用溅射到金刚石对顶砧上的氧化铝薄膜做绝热层,对样品进行了激光加热实验,最高温度达到2 224 K,电导率随着温度的上升而增大,结果显示,β相硼的电学特征仍然属于半导体的特征范围内。     

All-fiber-based photonic microwave generation with 10-15 frequency instability

We demonstrate an all-fiber-based photonic microwave generation with 10^-15frequency instability.The system consists of an ultra-stable laser by optical fiber delay line,an all-fiber-based"figure-of-nine"optical frequency comb,a high signal-tonoise ratio photonic detection unit,and a microwave frequency synthesizer.The whole optical links are made from optical fiber and optical fiber components,which renders the whole system compactness,reliability,and robustness with respect to enviro...     

甲基羟基铀酰离子与水的复分解反应

以醋酸铀酰为主要试剂, 在负离子检测模式下, 采用电喷雾串联质谱法制备了甲基羟基铀酰负离子. 实验发现, 气相中的甲基羟基铀酰离子与水分子发生分子离子复分解反应, 并用串联质谱法对反应产生的离子性产物进行了结构确认, 提出了反应的可能机理. 热力学计算结果表明, 该反应的ΔGReaction为-473.0 kJ/mol, ΔHReaction为-236.5 kJ/mol, ΔSSystem为0.792 kJ·mol-1·K-1. 该反应的速率常数为2.26 s-1.     

原子玻色-爱因斯坦凝聚体对V型三能级原子激光压缩性质的影响

利用格子液体方法对V型三能级原子玻色-爱因斯坦凝聚体与双模压缩相干态光场相互作用系统的哈密顿量进行分析,发现文献中对原子间相互作用部分的处理有不合理之处,从而对该哈密顿量作出了改进并研究了V型三能级原子玻色-爱因斯坦凝聚体与双模压缩相干态光场相互作用系统中原子激光的两个正交分量的压缩性质.研究表明:V型三能级原子玻色-爱因斯坦凝聚体中光场-原子相互作用强度对原子激光的两正交分量的涨落有明显的影响. 关键词： 玻色-爱因斯坦凝聚 V型三能级原子 压缩相干态 压缩原子激光