HTPB／TDI,HDI聚合反应动力学研究

对端羟基聚丁二烯／甲苯二异氰酸酯，端羟基聚丁二烯／己二异氰酸酯甲苯溶液体系进行了反应动力学研究，用基团分析方法计算了相应体系的活化能，并对无催化剂和有催化剂的体系作了比较。结果表明，二丁基二月桂酸象对上述体系有强的催化作用，使体系的活化能降低，反应速度加快。对于对端差基聚丁二烯／甲苯二异氰酸酯体系，无催化剂时前后期反应活化能分别为２９．１ｋＪ／ｍｏｌ、３７．４ｋＪ／ｍｏｌ，有催化剂时前后期反应活化     

唐家山堰塞湖泄洪问题的研究

研究的是唐家山地震次生灾害引发的堰塞湖问题.首先对数字高程地图进行等高图像分析求解了堰塞湖不同高程水位对应的湖区面积,建立了蓄水量体积与堰塞湖水位高程的离散化模型,然后建立了神经网络模型和多元线性回归模型研究了北川降雨量与堰塞湖入库流量的关系,继而求解得到不同降雨量下每日堰塞湖水位高程.在研究泄洪过程时,首先通过对泄洪过程和溃坝过程内在机理的研究分别建立了正交多项式逼近模型和仿真模型得到溃坝时的溃口流量随时间变化的关系,继而分析求解得到溃坝时其他参数随时间变化的关系.针对淹没区的问题,综合数字高程地图和行政区域地图,利用数字地图计算了洪水到达各被淹没区域的时间,淹没范围,以便于确定撤离方案.     

半导体激光器纵向泵浦准连续Cr∶LiSAF激光器的实验研究

用波长为653.2nm的半导体激光器实现了纵向泵浦Cr∶LiSAF激光器的准连续运转，晶体平均吸收功率为140mW时获得激光输出，在LD最大输出功率范围内，晶体平均吸收功率为680mW时，可获得最大平均输出功率32mW，斜效率5.6%.     

大理岩非分叉断裂的随机分形模型

本文建立了大理岩沿晶、穿晶及沿晶穿晶偶合断裂的随机分形模型，该模型能与大理岩的整体晶态结构自洽，且模型的分维值与测量值有很好的吻合。     

Scaling study of the combustion performance of gasben gas rocket injectors

To obtain the key subelements that may influence the scaling of gas-gas injector combustor performance, the combustion performance subelements in a liquid propellant rocket engine combustor are initially analysed based on the results of a previous study on the scaling of a gas-gas combustion flowfield. Analysis indicates that inner wall friction loss and heat-flux loss are two key issues in gaining the scaling criterion of the combustion performance. The similarity conditions of the inner wall friction loss and heat-flux loss in a gas-gas combustion chamber are obtained by theoretical analyses. Then the theoretical scaling criterion was obtained for the combustion performance, but it proved to be impractical. The criterion conditions, the wall friction and the heat flux are further analysed in detail to obtain the specific engineering scaling criterion of the combustion performance. The results indicate that when the inner flowfields in the combustors are similar, the combustor wall shear stress will have similar distributions qualitatively and will be directly proportional to p_c^0.8 d_t^-0.2 quantitatively. In addition, the combustion peformance will remain unchanged. Furthermore, multi-element injector chambers with different geometric sizes and at different pressures are numerically simulated and the wall shear stress and combustion efficiencies are solved and compared with each other. A multi-element injector chamber is designed and hot-fire tested at several chamber pressures and the combustion performances are measured in a total of nine hot-fire tests. The numerical and experimental results verified the similarities among combustor wall shear stress and combustion performances at different chamber pressures and geometries, with the criterion applied.     

水热法制备注射器样纳米氧化锌场发射特性的研究

应用水热法制备了注射器样纳米结构氧化锌样品,室温下测量其真空场发射特性.根据测量数据,基于Fowler-Nordheim方程,估算了场发射效应增强因子,观察到增强因子随外加电压增加取值的两阶段性;结合样品的光致发光谱和能量散射谱,应用半导体材料中强场效应理论,结合场发射电流密度测量系统的串联电路等效,研究样品中空位对场发射特性影响机理.结果表明,制备过程中形成的锌、氧空位,在样品中产生了相当于杂质态的缺陷能级,缺陷能级与样品形貌共同作用,使样品较大的增强因子随场强增加而阶跃性下降.最后,用电化学沉淀法和气 关键词： 场发射 强场效应 缺陷态 串联等效     

纳米氧化锌中三光子吸收与倍频效应致光辐射特性

为研究强光激励下纳米氧化锌发光机制,以气相传输法制备的冠状样品为对象,室温下以1 100nm与1 150 nm脉冲激光以及350 nm氙灯对其进行激励,观测光致发光谱.根据光强关系和强场与物质作用的三阶微扰理论,认为1 100,1 150 nm激光激励下的样品的紫外与可见光波段的辐射机理分别归因于样品中三光子吸收和二次谐波效应.同时,基于激子非弹性碰撞复合机制,对紫外辐射的红移现象进行了分析.     

京杭运河(杭州段)旅游资源及其旅游功能开发研究

从分析运河杭州段旅游资源的空间分布特征入手，对其旅游开发条件进行了评价，揭示了杭州城市旅游业发展与运河间的相互关系，提出运河杭州段旅游开发的功能定位与形象策划，并对运河各区段的旅游开发方向提出了建设的性的总体构想。     

吡啶-2,6-二[N-(1′-咪唑基丙基)甲酰胺]稀土配合物的合成及其离子识别性能

将配体吡啶-2,6-二[N-(1′-咪唑基丙基)甲酰胺](L)与苦味酸稀土盐[RE(pic)-3]在甲醇中反应合成了9种吡啶-2,6-二[N-(1′-咪唑基丙基)甲酰胺\]稀土配合物,其结构经元素分析、红外光谱及紫外光谱表征,确定了配合物的结构为REL(pic)₃·nCH₃OH·H₂O(RE=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Er; n=1或2; pic为苦味酸根)。并采用紫外光谱研究了游离配体对金属离子的识别性能。结果显示：加入稀土金属离子后,L中216 nm处吸收峰消失,202 nm处吸收峰明显增强且红移至213～218 nm处,表明配体对稀土金属离子具有明显的识别能力。     

Dielectrophoretic assembly of ZnO nanowires

The synthesis of zinc oxide （ZnO） nanowires is achieved by vapor phase transportation （VPT） method. The designed quartz tube, whose both ends are narrow and the middle is wider, is used to control the growth of ZnO nanowires. Dielectrophoresis （DEP） method is employed to align and manipulate ZnO nanowires which are ultrasonic dispersed and suspended in ethanol solution. Under the dielectrophoretic force, the nanowires are trapped on the pre-patterned electrodes, and further aligned along the electric field and bridge the electrode gap. The dependence of the alignment yield on the applied voltage and frequency is investigated.