高质量氧化镓单晶及肖特基二极管的制备

本文采用导模法生长技术,成功制备了高质量掺Si氧化镓(β-Ga₂O₃)单晶,掺杂浓度为2×10¹⁸ cm^-3.晶体呈现淡蓝色,通过劳厄衍射、阴极荧光(CL)及拉曼测试对晶体的基本性质进行了表征,结果表明晶体质量良好.紫外透过光谱证明该晶体的禁带宽度约为4.71 eV.此外,在剥离衬底上,采用电子束蒸发、光刻和显影技术制备了垂直结构的肖特基二极管,平均击穿场强EAva为2.1 MV/cm,导通电阻3 mΩ·cm²,展示了优异性能.     

载人空投着陆冲击下不同乘员姿态的损伤影响

针对某军用车辆在1 m高度进行无缓冲平台空投实验,并建立座椅与乘员的模拟模型。利用实验获取的座椅安装点冲击信号作为模拟模型的输入数据,并通过实验结果与模拟结果的对比验证了该模型的可靠性。借鉴航空工程相关研究,提出了一种将各关键损伤指标加以归一化的权重评价指标—加权损伤准则(weighted injury criteria,WIC)。研究了乘员仰卧角度和大小腿夹角两个姿态参数对乘员损伤的影响,并以WIC为优化目标,利用遗传算法完成参数优化工作。研究发现:对乘员小腿运动进行约束能降低乘员整体损伤响应,乘员对抗着陆冲击的最佳姿态为仰卧角47°～56°、大小腿夹角62°～68°。     

Performance of La2O3/InAlN/GaN metal—oxide—semiconductor high electron mobility transistors

We report on the performance of La2O3/InAlN/GaN metal-oxide-semiconductor high electron mobility transistors(MOSHEMTs) and InAlN/GaN high electron mobility transistors(HEMTs).The MOSHEMT presents a maximum drain current of 961 mA/mm at Vgs = 4 V and a maximum transconductance of 130 mS/mm compared with 710 mA/mm at Vgs = 1 V and 131 mS/mm for the HEMT device,while the gate leakage current in the reverse direction could be reduced by four orders of magnitude.Compared with the HEMT device of a similar geometry,MOSHEMT presents a large gate voltage swing and negligible current collapse.     

Improved crystal quality of GaN film with the in-plane lattice-matched Ino.17Alo.s3N interlayer grown on sapphire substrate using pulsed metal-organic chemical vapor deposition

We report on an improvement in the crystal quality of GaN film with an Ino.17Alo.83N interlayer grown by pulsed metal-organic chemical vapor deposition, which is in-plane lattice-matched to GaN films. The indium composition of about 17% and the reductions of both screw and edge threading dislocations （TDs） in GaN film with the InA1N interlayer are estimated by high resolution X-ray diffraction. Transmission electron microscopy （TEM） measurements are employed to understand the mechanism of reduction in TD density. Raman and photoluminescence measurements indicate that the InA1N interlayer can improve the crystal quality of GaN film, and verify that there is no additional residual stress induced into the GaN film with InA1N interlayer. Atomic force microscopy measurement shows that the InA1N interlayer brings in a smooth surface morphology of GaN film. All the results show that the insertion of the InA1N interlayer is a convenient method to achieve excellent crystal quality in GaN epitaxy.     

The degradation mechanism of an AlGaN/GaN high electron mobility transistor under step-stress

Step-stress experiments are performed in this paper to investigate the degradation mechanism of an AlGaN/GaN high electron mobility transistor(HEMT).It is found that the stress current shows a recoverable decrease during each voltage step and there is a critical voltage beyond which the stress current starts to increase sharply in our experiments.We postulate that defects may be randomly induced within the AlGaN barrier by the high electric field during each voltage step.But once the critical voltage is reached,the trap concentration will increase sharply due to the inverse piezoelectric effect.A leakage path may be introduced by excessive defect,and this may result in the permanent degradation of the AlGaN/GaN HEMT.     

Luminescence of a GaN grain with a nonpolar and semipolar plane in relation to microstructural characterization

We report on the growth of the high-quality GaN grain on a r-plane sapphire substrate by using a self-organized SiN interlayer as a selective growth mask.Transmission electron microscopy,scanning electron microscopy,and Raman spectroscopy are used to reveal the effect of SiN on the overgrown a-plane GaN growth.The SiN layer effectively terminates the propagation of the threading dislocation and basal plane stacking faults during a-plane GaN regrowth through the interlayer,resulting in the window region shrinking from a rectangle to a "black hole".Furthermore,strong yellow luminescence(YL) in the nonpolar plane and very weak YL in the semipolar plane on the GaN grain is revealed by cathodoluminescence,suggesting that C-involved defects are responsible for the YL.     

Optimization and Finite Element Analysis of the Temperature Field in a Nitride MOCVD Reactor by Induction Heating

A susceptor structure with a ring channel for a vertical metalorganic chemical vapor deposition reactor by induction heating is proposed. Thus the directions of heat conduction are changed by the channel, and the channel makes the heat in the susceptor redistribute. The pattern of heat transfer in this susceptor is also analyzed. In addition, the location and size of the channel in the susceptor are optimized using the finite element method. A comparison between the optimized and the conventional susceptor shows that the optimized susceptor not only enhances the heating efficiency but also the uniformity of temperature distribution in the wafer, which contributes to improving the quality of the film growth.     

Structural and optical investigation of nonpolar α-plane GaN grown by metalben organic chemical vapour deposition on r-plane sapphire by neutron irradiation

Nonpolar (1120) α-plane GaN films are grown by metal-organic chemical vapour deposition (MOCVD) on r-plane (1102) sapphire. The samples are irradiated with neutrons under a dose of 1 × 10¹⁵ cm^-2. The surface morphology, the crystal defects and the optical properties of the samples before and after irradiation are analysed using atomic force microscopy (AFM), high resolution X-ray diffraction (HRXRD) and photoluminescence (PL). The AFM result shows deteriorated sample surface after the irradiation. Careful fitting of the XRD rocking curve is carried out to obtain the Lorentzian weight fraction. Broadening due to Lorentzian type is more obvious in the as-grown sample compared with that of the irradiated sample, indicating that more point defects appear in the irradiated sample. The variations of line width and intensity of the PL band edge emission peak are consistent with the XRD results. The activation energy decreases from 82.5 meV to 29.9 meV after irradiation by neutron.     

Effects of the strain relaxation of an AlGaN barrier layer induced by various cap layers on the transport properties in AlGaN/GaN heterostructures

The strain relaxation of an AlGaN barrier layer may be influenced by a thin cap layer above, and affects the transport properties of AlGaN/GaN heterostructures. Compared with the slight strain relaxation found in AlGaN barrier layer without cap layer, it is found that a thin cap layer can induce considerable changes of strain state in the AlGaN barrier layer. The degree of relaxation of the AlGaN layer significantly influences the transport properties of the two-dimensional electron gas (2DEG) in AlGaN/GaN heterostructures. It is observed that electron mobility decreases with the increasing degree of relaxation of the AlGaN barrier, which is believed to be the main cause of the deterioration of crystalline quality and morphology on the AlGaN/GaN interface. On the other hand, both GaN and AlN cap layers lead to a decrease in 2DEG density. The reduction of 2DEG caused by the GaN cap layer may be attributed to the additional negative polarization charges formed at the interface between GaN and AlGaN, while the reduction of the piezoelectric effect in the AlGaN layer results in the decrease of 2DEG density in the case of AlN cap layer.