排序方式: 共有12条查询结果,搜索用时 31 毫秒
1.
应用扫描电子显微镜、广角X射线衍射和差示扫描量热手段研究了有机高分子/无机组分间以物理次价力(氢键)键合的高分子量PCL/SiO2杂化材料纳米相微结构和PCL高分子链在该微结构环境中的结晶成核生长特性及其影响因素.研究结果表明:杂化体系中高分子/无机组分间的微相分离尺度在纳米数量级,高分子微区的平均相畴尺寸在70nm左右,无机相形态呈现不规则的颗粒状.两相均匀分布程度与体系中组分间的氢键键合强度有关.PCL杂化后结晶度减小,对应的微晶尺寸明显改变,平衡熔点随无机组成含量的增加而下降.高分子链在晶核表面折叠形成结晶结构所需的能量增加.这一结果归因于无机非晶SiO2和键合强度的影响. 相似文献
2.
利用差示扫描量热法(DSC)和X射线衍射(XRD)研究了在不同丙烯腈/尿素投料比情况下的丙烯腈-尿素包合物的形成过程和组成. 实验结果表明DSC是一种研究包合物的客主比及分解热的有效方法. 测定了丙烯腈-尿素包合物的客主比和分解热分别为1.17和5361.53 J/mol. 同时发现丙烯腈-尿素包合物的形成依赖于冷冻时间,在足够长的冷冻时间之后丙烯腈-尿素包合物的组成达到稳定状态. 实验结果表明,丙烯腈分子可能是采用堆叠的方式排布在尿素晶道结构中. XRD结果表明只要丙烯腈分子进入尿素晶格中,丙烯腈-尿素包合物的结构便形成了,并且这种结构与形成过程终了时的结构是一致的. 只要丙烯腈是足量的,包合物中的丙烯腈分子排列会随冷冻时间的延长而增长,直到尿素的晶道结构被丙烯腈分子填满. 相似文献
3.
Liquid Nuclear Magnetic Resonance Implementation of Quantum Computation in Subspace 总被引:1,自引:0,他引:1 下载免费PDF全文
Based on the logical labelling method, we prepare an effective pure state in a subsystem of a three spin system via liquid nuclear magnetic resonance technique. Then with this subspace effective pure state we implement the Deutsch-Jozsa algorithm. The tomography for the subspace effective pure state and the corresponding spectrum of the output for the Deutsch-Jozsa algorithm agree with theoretical predictions, which shows that we have successfully implemented the Deutsch-Jozsa algorithm in a subsystem of a nuclear spin system and demonstrated a subspace quantum computation. 相似文献
4.
5.
6.
超高分子量聚乙烯凝胶/结晶膜中链缠结的Raman研究 总被引:1,自引:0,他引:1
为获得超高分子量聚乙烯的超高取向性,利用准稀溶液速冷解缠方法可使λm=400,力学性能大幅度提高,但距离链的理论强度还有一定差距,NMR的相结合研究表明其中仍残存一定量的界面层及非晶部分。从缠经链角度来看,其分子链的解缠并不能达到完全。 相似文献
7.
通过高低工作频率的高分辩率核磁共振谱仪(型号分别为GX-400和FX-90Q)对含有不同微量异种结构单元的聚乙烯样品作了^13C谱测量和比较分析;结果表明^13C谱在较高磁场频率(100.4MHz)条件下可检测灵敏度达到0.5个支化点/10000个碳原子(0.5/10000C);而较低磁场频率(22.5MHz)只达到1个支化点/1000个碳原子(1/1000C)以上;综合分析所得结果,指出在用电磁体系列(谱仪频率一般为90MHz或100MHz)核磁共振谱仪检测高分子量物质时,应注意有遗漏1/1000C以下浓度结构的可能性;分析了^13C谱可检测灵敏度与磁场强度等因素的关系,得到了可检测灵敏度S/N与磁场强度(H0)间比较适合的关系式。 相似文献
8.
9.
A range of poly(ε-caprolactone)/poly(N-vinyl-2-pyrrolidone) amphiphilic block copolymers with well-de ned hydrophilic chain length were synthesized by the living/controlled reversible addition fragmentation chain transfer polymerization method. The composition and struc-ture of the targeted resultants were characterized with 1H NMR, 13C NMR, FT-IR spec-troscopy and gel permeation chromatography. The various block copolymers were success-fully employed to fabricate the spherical micelle with core-shell morphological structure. The poly(N-vinyl-2-pyrrolidone) block-dependent characteristics of the copolymeric micelles were investigated by uorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. The solubilization of the hydrophobic ibuprofen as a model drug in the micelle solution was also explored. It was found that the drug loading contents are related to the micellar morphology structure determined by hydrophilic chain length in the copolymer. 相似文献
10.
聚酯/无机杂化分子间键合作用及微结构相关性的光谱研究 总被引:4,自引:0,他引:4
采用FTIR,UV-Vis,WAXD和DSC手段,研究了分子间为非共价键化学结合的PCL/SiO2高分子-无机杂化透明材料组分间的键合型式;分子间特殊氢键相互作用行为与结晶性聚合物在杂化材料中的微结构相关性。结果表明,杂化体系中PCL高分子与SiO2无机组分间的键合,主要是依赖于杂化体系中较强的分子间氢键相互作用,其作用强度随无机相TEOS含量而变化。体系中氢键相互作用增加使PCL结晶高分子的相对结晶度下降,杂化材料的光学透明性提高。同时对体系中高分子-无机组分的微相分离尺度产生影响。 相似文献