排序方式: 共有16条查询结果,搜索用时 15 毫秒
1.
采用共沉淀法按不同Al掺杂比例x[x=n(Al)∶n(Mn+Al)=0, 0.025, 0.050, 0.100, 0.150, 0.200]制得了Al(OH)3和Mn3O4混合物, 将其与LiNO3按一定比例混合, 在空气中于700 ℃烧结得Li[Mn(Al)]2O4样品. X射线衍射和Raman光谱结果表明, 在0≤x≤0.20范围内均得到了单相的尖晶石型样品, 随着x的增加, 晶胞参数减小, 晶格振动能量增加, Mn(Al)-O的结合增强, 结构稳定性增强. 相似文献
2.
通过研究LiNiO2和α-LiAlO2的制备条件,合成出LiNi1-xAlxO2(x=0~0.6)材料.XRD和XPS测试结果表明,各样品均具有α-NaFeO2型单相结构,并形成LiNi1-xAlxO2固溶体.随着Al固溶量x的增加,材料Ni(Al)—O结合能增加,晶胞的a轴缩短,c/a比增大,层状属性更加明显,结构稳定性增强.烧结实验结果表明,在低Al固溶量时,材料的合成需要在氧气气氛中进行,Al掺杂能够抑制结构中的Li缺位,降低材料形成温度及其在合成过程中对氧气的依赖程度. 相似文献
3.
Electronic,Vibrational, and Superconducting Properties of High-Pressure Metallic SiH4: ab initio Calculations
下载免费PDF全文
![点击此处可从《中国物理快报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
We extensively explore the experimentally proposed metallic structure of hcp P63 for the hydrogen rich compound, SiH4. It is found that the lattice dynamic of this structure is severely unstable. By freezing the soften mode, an orthorhombic Pbcn structure is discovered to be dynamically stable up to 226GPa. Within the conventional BCS theory, the calculated critical temperature Tc within the proposed Pbcn structure is 16.5K at 188GPa, in good agreement with the experimental result (17.5K). Thus, we propose that the current predicted orthorhombic phase is a better candidate for the metallic phase of SiH4. 相似文献
4.
Research and development of a 1.3 GHz 9-cell cavity test cryomodule were carried out by a collaboration group between IHEP (Institute of High Energy Physics) and TIPC (Technical Institute of Physics and Chemistry) in China. The cryomodule is a "test model" for the ILC cryomodule, and a key component of a superconducting accelerator test unit which will be built in the near future, also can be used as a horizontal test facility for 1.3~GHz 9-cell cavities. This paper presents the development status of the cryomodule, including structure design, cryogenic flow diagram, thermal and mechanical simulations, heat load estimation and etc. 相似文献
5.
LiNi1-xAlxO2(x=0~1.0)固溶体结构的XRD研究 总被引:5,自引:1,他引:4
利用溶胶凝胶法制备了新型锂离子二次电池正极材料LiNi1-xAlxO2(x=0,0.1~1.0)固溶体,X射线衍射结果表明,在0≤x≤1范围内,材料均为具有α-NaFeO2型结构的LiNi1-xAlxO2固溶体单相.随着Al固溶量的增加,晶胞参数发生变化,a轴缩短,c/a比增大,晶胞体积V0减小,材料的层状属性更加明显. 相似文献
6.
北京谱仪(BESIII)超导磁体是为北京正负电子对撞机二期改造工程(BEPCII)制造的超导探测器磁体.它采用了国际上先进的两相氦间接冷却方式及线圈内绕技术.其超导线为铝稳定体NbTi/Cu超导电缆.由于生产工艺上长度的限制,BESIII超导电缆由三段电缆焊接而成.焊接匝电阻必须限制在一定范围内,以免产生过大的焦耳热,影响磁体的正常运行.超导电缆由支撑筒内部引出到颈管及阀箱部分时,有一定角度的平弯及侧弯,这部分弯曲电缆的载流能力也是必须要考虑的问题.为此,我们进行了两次超导电缆性能测试实验,对超导电缆弯曲前后的载流能力进行了测试,并且测量了超导电缆低温下的焊接电阻.本文提供了这两次实验的实验结果及分析. 相似文献
7.
制备条件对尖晶石型LiMn2O4的相行为及结构的影响 总被引:3,自引:0,他引:3
将LiNO3和Mn3O4按不同物质的量比[x=n(Li):n(Mn)=0.50,0.52,0.54,0.58,0.62,0.70]混合,在空气气氛下,于700℃烧结得样品.实验发现,在0.52≤x≤0.70的范围内,样品均呈现出单相的尖晶石型LiMn2O4结构,晶胞参数随着x的增加而减小.将x=0.50的LiNO3和Mn3O4混合物在不同温度(300,400,500,600和700℃)下进行烧结处理.结果表明,于300℃合成得到的样品为尖晶石型LiMn2O4,随着烧结温度的升高,晶胞参数增大;当温度大于600℃时出现杂相,可以通过加入过量的Li(即x≥0.52)来加以抑制.实验结果表明,通过控制烧结温度和Li加入量可以得到理想的尖晶石型LiMn2O4单相材料. 相似文献
8.
As part of the international research program on the superconducting cavity for the International Linear Collider (ILC) R&;D on the 1.3 GHz low loss superconducting cavities has been carried out at the Institute of High Energy Physics (IHEP) since 2005. A design of 1.3 GHz low loss cavity shape was proposed and six single-cell cavities of different niobium material were successfully fabricated with standard technology. In this study our priority was on large grain (LG) cavities. The two LG cavities were treated with complete procedures of surface treatments based on chemical polishing (CP) without electro polishing (EP) at IHEP. The two LG cavities and a fine grain cavity were sent to KEK for vertical testing. All the three cavities reached accelerating gradients higher than 35 MV/m and the maximum gradient of 40.27 MV/m was achieved in the LG cavity. This paper presents the process of the vertical RF tests and the comparison of the LG and fine grain cavities's performance. 相似文献
9.
In the upgrade project of the Beijing Electron Positron Collider (BEPCⅡ), three superconducting magnets are employed to realize the goal of two orders of magnitude higher luminosity. A cryogenic system with a total capacity of 0.5~kW at 4.5~K was built at the Institute of High Energy Physics (IHEP) to support the operations of these superconducting devices. For preparing the commissioning of the system, the refrigeration process was simulated and analyzed numerically. The numerical model was based on the latest engineering progress and focused on the normal operation mode. The pressure and temperature profiles of the cryogenic system are achieved with the simulation. The influence of the helium mass flow rates to cool superconducting magnets on the thermodynamic parameters of their normal operation is also studied and discussed in this paper. 相似文献
10.
本文应用4×4矩阵方法,研究了光学元件列阵的各光学单元之间的共焦问题,给出了较好的近似理论公式,它包括了傍轴光线近似的特殊情况。 相似文献