排序方式: 共有39条查询结果,搜索用时 15 毫秒
1.
2.
3.
阵列波导光栅的平坦化在实际应用中有很重要的意义.本文系统地研究了阵列波导光栅的平坦化.在输入波导、输出波导、阵列波导输入端与输出端上分别引入了指数型锥形波导.通过改变锥形波导的形状和尺寸来实现平坦化的优化.本文首先从理论上论述了引入指数型锥形波导的输出光谱特性,给出了结构参量的关系表达式,阐明了输入波导处的锥形波导是影响输出光谱平坦化的主要因素,阵列波导和输出波导处的锥形波导对输出光谱的平坦化有一定的影响.其次采用数值模拟的方法模拟了输出光谱,优化了结构参量,总结出了指数型锥形波导对平坦化影响的趋势和规律.模拟结果显示,输出光谱1 dB带宽大于通道间隔的50%,插入损耗从5.2 dB减小到了4.0 dB,串扰小于-30 dB.最后,本文给出了实验结果,插入损耗减小了0.87 dB,串扰减小了3.67 dB,1 dB带宽增加0.1 nm,增加了54.7%.实验结果表明引入指数型锥形波导提高了阵列波导光栅器件的光谱性能. 相似文献
4.
16×0.8nm硅基二氧化硅阵列波导光栅设计 总被引:2,自引:2,他引:0
给出了更为合理的阵列波导光栅(AWG)的设计原则。在设计时兼顾了输出谱的非均匀性Lu和输出通道数N的要求,克服了设计中可能引起通道数N丢失和不考虑输出谱非均匀性Lu的缺点。用该方法设计了折射率差为0 75%和16×0 8nm的硅基二氧化硅AWG。采用广角有限差分束传播方法(FD BPM)对所设计的AWG进行了输出谱的模拟,得到了插损为 1.5dB、串扰为 48dB、通道非均匀性约为1dB的AWG,设计指标达到了商用要求。 相似文献
5.
Based on the hybrid integration technology, an ultra-compact and low cost transmitter optical subassembly module is proposed. Four directly modulated lasers are combined with a coarse wavelength division multiplexer operated at the O-band. The bandwidth for all channels is measured to be approximately 3 GHz. The 112 Gb∕s transmission is experimentally demonstrated for a 10 km standard single mode fiber(SSMF), in which an optical isolator is used for avoiding the back-reflected and scattered light to improve the bit error rate(BER) performance. A low BER and clear eye opening are achieved for 10 km transmission. 相似文献
6.
A 13-channel, InP-based arrayed waveguide grating (AWG) is designed and fabricated in which the on-chip loss of the central channel is about -5 dB and the crosstalk is less than -23 dB in the center of the spectrum response. However, the central wavelength and channel spacing are deviated from the design values. To improve their accuracy, an optimized design is adopted to compensate the process error. As a result, the central wavelength 1549.9 nm and channel spacing 1.59 nm are obtained in the experiment, while their design values are 1549.32 nm and 1.6 nm, respectively. The route capability and thermo-optic characteristic of the AWG are also discussed in detail. 相似文献
7.
Quantum key distribution transmitter chip based on hybrid-integration of silica and lithium niobates
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
A quantum key distribution transmitter chip based on hybrid-integration of silica planar light-wave circuit (PLC) and lithium niobates (LN) modulator PLC is presented. The silica part consists of a tunable directional coupler and 400-ps delay line, and the LN part is made up of a Y-branch, with electro-optic modulators on both arms. The two parts are facet-coupled to form an asymmetric Mach-Zehnder interferometer. We successfully encode and decode four BB84 states at 156.25-MHz repetition rate. Fast phase-encoding of 0 or $\pi $ is achieved, with interference fringe visibilities 78.53% and 82.68% for states $|+\rangle$ and $|-\rangle$, respectively. With the aid of an extra off-chip LN intensity modulator, two time-bin states are prepared and the extinction ratios are 18.65 dB and 15.46 dB for states $|0\rangle$ and $|1\rangle$, respectively. 相似文献
8.
A new fabrication technology for three-dimensionally buried silica on silicon optical waveguide based on deep etching and thermal oxidation is presented. Using this method, a silicon layer is left at the side of waveguide. The stress distribution and effective refractive index are calculated by using finite element method and finite different beam propagation method, respectively. The results indicate that the stress of silica on silicon optical waveguide fabricated by this method can be matched in parallel and vertical directions and stress birefringence can be effectively reduced due to the side-silicon layer. 相似文献
9.
采用电子束光刻和感应耦合等离子刻蚀等工艺,研制了一种基于绝缘硅材料的的微环谐振可调谐滤波器.滤波器微环半径为5 μm左右,波导截面尺寸为(350~500 nm)×220 nm不等.测试结果表明,波导宽度为450 nm时器件性能最为理想,其自由频谱宽度为16.8 nm,1.55 μm波长附近的消光比为22.1 dB.通过对微环滤波器进行热光调制,在21.4 ℃~60 ℃温度范围内实现了4.8 nm波长范围的可调谐滤波特性,热光调谐效率达到0.12 nm/℃.研究了基于单环和双环的多通道上下载滤波器,实验结果表明多通道滤波器的信号传输存在串扰,主要是不同信道之间的串扰,尤其在信号上载时,会在相邻信道产生较大串扰. 相似文献
10.
设计了一种基于绝缘上层硅的硅-有机物材料混合马赫-曾德干涉型高速电光调制器.利用光束传播法对顶层硅为220nm的绝缘上层硅基片上的3dB分束器/合束器的结构参数进行模拟,优化后附加损耗仅为0.106dB.为提高模式转换效率,在条形波导和slot波导之间设计了模式转换器,光耦合效率高达98.8%,实现了光模式高效转化.利用时域有限差分法模拟了slot波导平板区掺杂浓度对波导内光学损耗的影响,在几乎不产生光学损耗的情况下,得到平板区轻掺杂浓度为71017/cm3,调制器设计总损耗为0.493dB.利用薄膜模式匹配法对slot波导结构进行仿真分析,考虑slot区等效电容及平板区等效电阻对带宽的影响,优化后得到slot波导结构的限制因子为0.199.采用slot波导与强非线性有机材料LXM1结合的绝缘上层硅平台实现了强普克尔效应,得到电光调制器半波电压长度积为1.544V·mm,电学响应3dB带宽为137GHz. 相似文献