排序方式: 共有6条查询结果,搜索用时 125 毫秒
1
1.
在中国散裂中子源工程中, 快循环同步加速器负责将剥离注入的能量为80MeV的质子束加速至1.6GeV后引出。在快循环同步加速器上共安装了两台壁电流探测器, 用来观测束流从注入至引出过程中束团在时域上的变化情况。详细介绍了壁电流探测器在陶瓷间隙、磁性材料和匹配电阻等方面的设计考虑, 以达到带宽满足百kHz到30 MHz的设计目标, 并对实际带束流测量结果进行分析讨论。经实际在线运行测试, 此壁电流探测器完全满足束流调试及运行需要。 相似文献
2.
Emittance is an important characteristic of describing charged particle beams. In hadron accelerators, we often meet irregular beam distributions that are not appropriately described by a single rms emittance or 95% emittance or total emittance. In this paper,it is pointed out that in many cases a beam halo should be described with very different Courant-Snyder parameters from the ones used for the beam core. A new method — the Courant-Snyder invariant density screening method - is introduced for analyzing emittance data clearly and accurately. The method treats the emittance data from both measurements and numerical simulations. The method uses the statistical distribution of the beam around each particle in phase space to mark its local density parameter, and then uses the density distribution to calculate the beam parameters such as the Courant-Snyder parameters and emittance for different beam boundary definitions. The method has been used in the calculations for beams from different sources, and shows its advantages over other methods. An application code based on the method including the graphic interface has also been designed. 相似文献
3.
针对一台用于加速器驱动洁净核能源系统研究、高占空比的强流质子加速器,开展强流质子直线加速器束晕产生的研究工作,其中的束流剖面分布特别是束晕部分测量的束流诊断系统是研究工作的核心内容。束晕的产生在低能量段尤其重要,且对整个直线加速器的设计有重要影响。介绍了研究束晕增长的束流输运线和测量系统的布局设计,并根据所研究的加速器束流的情况进行束流剖面探测器和束晕测量的设计和预研,包括丝靶材料的模拟计算和选择、机械驱动的控制系统设计和研究、前端模拟电路的设计和仿真模拟、以及整个系统与EPICS和VxWorks的计算机控制接口等。 相似文献
4.
The period length is usually much larger than the cavity effective length in a low energy superconducting linac.The long drifts between cavities will not only decrease the acceptance of the linac, but also lead to possible instability. The linac will be more sensitive to mismatch and other perturbations. From the longitudinal motion equation, the function which describes the parametric resonance is deduced and the relation between the instability region and the cavity filling factor is discussed. It indicates that if the zero current phase advance per period is kept below 90°, instability driven by parametric resonance will never occur. The space charge effect will enhance the instability, so that a stricter limitation on the phase advance per cell is required. From the numerical simulation results for two different schemes of Injector-Ⅰ of the C-ADS driver linac, one can find that even with just three cells in the unstable region, significant emittance growth can be observed. Further investigations show that it is apt to produce halo particles under resonance, and the machine becomes more sensitive to errors and mismatches. Therefore, it is important to keep all cells in the stable region throughout the linac of very high beam power to minimize beam losses. 相似文献
5.
6.
针对一台用于加速器驱动洁净核能源系统研究、高占空比的强流质子加速器,开展强流质子直线加速器束晕产生的研究工作,其中的束流剖面分布特别是束晕部分测量的束流诊断系统是研究工作的核心内容。束晕的产生在低能量段尤其重要,且对整个直线加速器的设计有重要影响。介绍了研究束晕增长的束流输运线和测量系统的布局设计,并根据所研究的加速器束流的情况进行束流剖面探测器和束晕测量的设计和预研,包括丝靶材料的模拟计算和选择、机械驱动的控制系统设计和研究、前端模拟电路的设计和仿真模拟、以及整个系统与EPICS和VxWorks的计算机控制接口等。 相似文献
1