Highly transparent ceramics for the spectral range from 1.0 to 60.0μm based on solid solutions of the system AgBr-AgI-TlI-TlBr

The article is devoted to the technology for obtaining optical ceramics of Ag Br-Tl I and Ag Br-Tl Br_0.46I_0.54 systems and manufacturing samples with different compositions.The new heterophase crystal ceramics are transparent without absorption windows in the spectral range from 1.0 to 60.0μm.In the ceramics’transparency spectra based on the Ag Br-Tl I and Ag Br-Tl Br_0.46I_0.54 systems fusibility diagrams,with an increase in the thallium halides mass fraction,as well as the replacement of the bromine ion with iodine,the maximum transparency shifts to a long infrared region.     

A modern approach to the solution and analysis of the Simha-Somcynsky model for the description of pressure-volume-temperature properties of polymer fluids

We revisit the Simha-Somcynsky model of polymer fluids with the purpose of developing novel theoretical and computational approaches to simplify and speed up its solution as well as the fitting of experimental data, and decrease its level of mathematical complexity. We report a novel method that allows us to solve one of the two equations of the model exactly, thus putting the level of mathematical difficulty on a par with the one of other models for polymer fluids. Moreover, we describe a computational algorithm capable of fitting all five parameters of the model in an unbiased way. The results obtained reproduce literature results and fit experimental pressure-volume-temperature and solubility parameter data for three polymers very accurately. Moreover, the new techniques allow for the investigation of the model at very low temperatures. Unexpectedly, the model predicts behaviors that could be interpreted as a glass transition, as routinely observed in dilatometry and differential scanning calorimetry, and a glass phase. We compared the predicted and experimental T g’s for cis poly(1,4-butadiene) and found an excellent quantitative agreement.     

A STRASSEN LAW OF THE ITERATED LOGARITHM FOR PROCESSES WITH INDEPENDENT INCREMENT

ＡＳＴＲＡＳＳＥＮＬＡＷＯＦＴＨＥＩＴＥＲＡＴＥＤＬＯＧＡＲＩＴＨＭＦＯＲＰＲＯＣＥＳＳＥＳＷＩＴＨＩＮＤＥＰＥＮＤＥＮＴＩＮＣＲＥＭＥＮＴＷａｎｇＪｉａｇａｎｇＡｂｓｔｒａｃｔＬｅｔＸ＝｛Ｘ（ｔ），ｔ０｝ｂｅａｐｒｏｃｅｓｗｉｔｈｉｎｄｅｐ...     

Ni(111)表面一氧化碳和氢共吸附的密度泛函理论研究

本文用密度泛函理论(DFT)的总能计算研究了一氧化碳和氢原子在Ni(111)表面上p(2×2)共吸附系统的原子结构和电子态，结果表明CO和H原子分别被吸附于两个对角p(1×1)元胞的hcp和fcc位置.以氢分子和CO分子作为能量参考点，总吸附能为2.81 eV，相应的共吸附表面功函数φ为6.28 eV.计算得到的C—O，C—Ni和H—Ni的键长分别是1.19?, 1.96?和 1.71?，并且CO分子以C原子处于hcp的谷位与金属衬底原子结合.衬底Ni(111)的最外两层的晶面间距在吸附后的相对变化分别是 关键词： Fisher-Tropsch反应 催化作用 Ni(111) p(2×2)/(CO+H) 共吸附     

填充式方钴矿化合物CeOs4Sb12近藤相互作用的非弹性中子散射研究

CeOs4Sb12晶体中由于导电电子与Ce3+ 4f1电子之间存在c-f杂化作用导致费米面附近存在能量间隙.这种c-f近藤相互作用和能量间隙是理解CeOs4Sb12物理性质,如近藤绝缘体行为、Ce3+磁矩在低温下猝灭以及重费米性等电、磁性质的关键.当用LAM-D中子谱仪对粉末CeOs4Sb12进行测量时,可以得到不同温度下CeOs4Sb12的非弹性中子散射谱.结果表明CeOs4Sb12中存在近藤相互作用,其作用强度为3.1 meV,证实了CeOs4Sb12为近藤绝缘体.中子测量得出CeOs4Sb12德拜温度为317 K.     

纳米复合超硬薄膜中与界面有关的弛豫现象

利用内耗技术研究了TiSiN系列纳米复合超硬薄膜的结构弛豫和硬化机理.当共振频率大约在100 Hz时在230～280 ℃范围内观察到一个弛豫型的内耗峰.计算出激活能为0.7～1.0 eV,弛豫时间指数前因子为10-10～10-12秒.对比一系列样品,发现硬度越高内耗峰越低,在硬度高于50 GPa的薄膜中没有内耗峰.内耗峰随退火温度升高而不断降低,直至600～750 ℃退火时消失, 并且杨氏模量开始增加,这跟样品退火后硬度增长是一致的.结果表明内耗峰来源于样品中界面的弛豫过程.     

关于广义分数次积分的合成

Compositions of generalized fractional integral operators involving Gauss hy-pergeometric function with power weights are studied. Composition formulas for such integrals which are the operators of the same type are obtained. In parti-cular, compositions of two identical operators are given.     

实验研究二维圆柱后尾流中涡脱落的有序和混沌现象

本文给出了在Re=50—400范围内二维圆柱后涡脱落的有序和混沌现象的一些初步实验结果。涡脱落由有序到混沌的转捩发生在Re=184.6—193.5之间,但是它不是通过准周期途径。在涡脱落频率与Re数的关系曲线上有两个间断。在Re=70处的间断可能对应于倾斜涡脱落模式的变化,在Re≈193.5处的第二间断对应于由有序到混沌状态的转捩。     

填充式方钴矿化合物CeOs4Sb12近藤相互作用的非弹性中子散射研究

CeOs₄Sb₁₂晶体中由于导电电子与Ce³⁺ 4f¹电子之间存在c-f杂化作用导致费米面附近存在能量间隙.这种c-f近藤相互作用和能量间隙是理解CeOs₄Sb₁₂物理性质，如近藤绝缘体行为、Ce³⁺磁矩在低温下猝灭以及重费米性等电、磁性质的关键.当用LAM-D中子谱仪对粉末CeOs₄Sb₁₂进行测量时，可以得到不同温度下CeOs₄Sb₁₂的非弹性中子散射谱.结果表明CeOs₄Sb₁₂中存在近藤相互作用，其作用强度为3.1 meV，证实了CeOs₄Sb₁₂为近藤绝缘体.中子测量得出CeOs₄Sb₁₂德拜温度为317 K. 关键词： 非弹性中子散射 填充式方钴矿 近藤绝缘体     

A Convenient and Efficient Procedure fox Oxime Ethers

Acetophenone oxime and benzaldehyde oxime were converted to oxime ethers in the presence of alkyl halide or methyl sulfate and KOH in aqueous DMSO in 5 to 70 min. The yields of oxime ethers were 70-96%.