Non-homogeneous SiGe-on-insulator formed by germanium condensation process

Ge condensation process of a sandwiched structure of Si/SiGe/Si on silicon-on-insulator （SOI） to form SiGe-on- insulator （SGOI） substrate is investigated. The non-homogeneity of SiGe on insulator is observed after a long time oxidation and annealing due to an increased consumption of silicon at the inflection points of the corrugated SiGe film morphology, which happens in the case of the rough surface morphology, with lateral Si atoms diffusing to the inflection points of the corrugated SiGe film. The transmission electron microscopy measurements show that the non-homogeneous SiGe layer exhibits a single crystalline nature with perfect atom lattice. Possible formation mechanism of the non-homogeneity SiGe layer is presented by discussing the highly nonuniform oxidation rate that is spatially dependent in the Ge condensation process. The results are of guiding significance for fabricating the SGOI by Ge condensation process.     

Analysis of tensile strain enhancement in Ge nano-belts on an insulator surrounded by dielectrics

Ge nano-belts with large tensile strain are considered as one of the promising materials for high carrier mobility metal- oxide-semiconductor transistors and efficient photonic devices. In this paper, we design the Ge nano-belts on an insulator surrounded by Si3N4 or SiO？ for improving their tensile strain and simulate the strain profiles by using the finite difference time domain （FDTD） method. The width and thickness parameters of Ge nano-belts on an insulator, which have great effects on the strain profile, are optimized. A large uniaxial tensile strain of 1.16% in 50-nm width and 12-nm thickness Ge nano-belts with the sidewalls protected by Si3N4 is achieved after thermal treatments, which would significantly tailor the band gap structures of Ge-nanobelts to realize the high performance devices.     

金属与半导体Ge欧姆接触制备、性质及其机理分析

金属与Ge材料接触时界面处存在着强烈的费米钉扎效应, 尤其与n型Ge形成的欧姆接触的比接触电阻率高, 是制约Si基Ge器件性能的关键因素之一. 本文对比了分别采用金属Al和Ni 与Si衬底上外延生长的p型Ge和n型Ge材料的接触特性. 发现在相同的较高掺杂条件下, NiGe与n型Ge可形成良好的欧姆接触, 其比接触电阻率 较 Al接触降低了一个数量级, 掺P浓度为2×10¹⁹ cm^-3时达到1.43×10^-5 Ω·cm². NiGe与p型Ge接触和Al接触的比接触电阻率相当, 掺B浓度为4.2×10¹⁸ cm^-3时达到1.68×10^-5 Ω·cm². NiGe与n型Ge接触和Al电极相比较, 在形成NiGe过程中, P杂质在界面处的偏析是其接触电阻率降低的主要原因. 采用NiGe作为Ge的接触电极在目前是合适的选择. 关键词： 金属与Ge接触性质 NiGe 比接触电阻率