激光多普勒微振动信号的直接强度解调

在传统的激光多普勒测振方法中,频移信号的检测通常需要具有比较复杂的频率或相位解调系统。从激光多普勒频移和干涉理论出发,提出了一种测量振幅小于纳米量级的方法———直接强度解调法。分析了直接强度解调法的适用范围。实验中利用了迈克尔逊干涉仪结构,采用了直接强度解调的方法。对振幅约为1nm的振动信号来说,其信噪比为23dB。     

钕玻璃的温敏特性及光纤温度传感器

本文从理论上通过对钕玻璃中Nd～(3+)离子光吸收特性的分析,阐明了其光吸收对温度依从性的原因.在实验中,试制了几种不同类型的钕玻璃光纤温度传感探头.对Nd～(3+)离子光吸收的温度特性进行了验证,其结果和理论分析相一致,实验表明钕玻璃是一种性能良好的光纤温敏传感材料.     

Temperature-insensitive Mach-Zehnder interferometric strain sensor based on concatenating two waist-enlarged fiber tapers

A novel temperature-insensitive strain sensor,based on an in-line Mach-Zehnder interferometer,is fabricated by concatenating two waist-enlarged fiber tapers separated by a short piece of photonic crystal fiber. The interference spectrum of the proposed sensor is analyzed in detail.Experimental results demonstrate that this sensor has a strain sensitivity of.3.02 pm/μεand maintains the temperature insensitivity feature. The proposed sensor has great potential in diverse sensing applications due to its advantages,such as its compact size,low cost,and simple fabrication process.     

光放放大器增益饱和对有源光纤环形腔滤波特性的影响

从理论和实验两个方面研究了有源光纤环形腔滤波器输入光功率对光纤放大器增益的影响及由此引起的对有源光纤环形腔滤波特性的影响，在考虑上述影响的情况下，对有源光纤环形腔滤器参数的优化作了讨论。     

光学自由曲面面形检测技术

光学自由曲面因其表面自由度较大,可以针对性地提供或矫正不同的轴上或轴外像差,同时满足现代光学系统高性能、轻量化和微型化的要求,逐渐成为现代光学工程领域的热点。自由曲面的检测技术已经成为制约其应用的最重要因素,而目前精密光学自由曲面的检测手段仍然沿用非球面检测方法。本文回顾了近年来的自由曲面检测发展历程,对目前主流的非接触式检测方法(微透镜阵列法,结构光三维检测法,相干层析术,干涉检测法)进行了重点介绍;总结了非球面检测方法运用到自由曲面检测中的技术难点,同时结合这些技术难点,展望了自由曲面检测的未来发展新趋势,主要集中在非旋转对称像差的动态补偿、分区域像差的回程误差校准及子孔径拼接技术。     

光纤放大器增益饱和对有源光纤环形腔滤波特性的影响

从理论和实验两个方面研究了有源光纤环形腔滤波器输入光功率对光纤放大器增益的影响及由此引起的对有源光纤环形腔滤波特性的影响。在考虑上述影响的情况下 ,对有源光纤环形腔滤波器参数的优化作了讨论     

A fiber micro-vibration sensor based on single-mode fiber ring laser

A new micro-vibration sensor based on single-mode fiber ring laser is put forward. The Mach-Zehnder interferometric （MZI） detection technique is presented for interrogating laser frequency shift due to the measurand （piezoelectric transducer （PZT） is used to simulate the micro-vibration） induced laser cavity strain from both single- and multi-mode lasers. In the experiment, compared with multi-mode laser sensors, the single-mode laser sensor is proved to be a sensor with high resolution. When the PZT is driven by the analog signal （0.03 rad near 2 kHz）, the signal-to-noise ratio （SNR） of output signal from the single-mode laser sensor is close to 55 dB and the sensitivity of the sensor is about 5 ×10^-5 rad/Hz1/2.     

自聚焦透镜列阵的色差测量

本文分析了色差的产生和表示，计算和测量了锂玻璃自聚焦透镜成像系统中的轴向色差与横向色差，讨论了色差对自聚焦透镜列阵成像的影响。     

Design of 20 mm~200 mm zoom objective lens for polarization imaging system北大核心CSCD

The zoom objective lens is an important part of the polarization imaging system. At present, the zoom objective lens on the market is relatively expensive due to the use of more aspheric surfaces. In order to reduce the processing cost of the polarization imaging system zoom objective lens, a 20 mm~200 mm zoom objective lens for polarization imaging system was designed. By using positive group compensation method and Zemax to optimize the zoom system, the final system used only 7 spherical lenses to achieve good image quality. The modulation transfer function (MTF) is greater than 0.3 at 120 lp/mm, the distortion is less than 4%, and the cam curve of the system is smooth without breakpoints. The system tolerance analysis results show that the tolerance range is set as follows: the aperture tolerance of the lens surface is 2, the thickness tolerance of the lens or air center is ±0.02 mm, the inclination tolerance of the lens surface center is ±0.025°, the lens assembly and adjustment tolerance is ± 0.025 mm, and the lens refractive index deviation is 0.002. The tolerance setting conforms to the component processing and system assembly and adjustment process, which has a certain reference value to reduce the cost of polarization imaging system. © 2022 Editorial office of Journal of Applied Optics. All rights reserved.     

基于光纤温度和应变传感器的物理创新实验

为了实现温度和应变同时测量,本文设计了一种基于多模干涉的光纤温度和应变传感器.该传感器利用光纤熔接机将一段细保偏光纤和一段细芯光纤错位熔接后引入萨格纳克环中而制成.由于光纤错位和模场失配,传感器内存在偏振模干涉和纤芯模-包层模干涉.对不同温度和应变作用下采集到的传感器透射谱进行滤波处理,可提取两种干涉对应的透射谱.基于透射谱中两个不同波谷的温度和应变灵敏度建立同时测量矩阵,即可实现温度和应变的同时测量.实验数据显示该传感器的温度和应变分辨率分别为0.30℃和13.50με.本实验可以作为物理和光电相关专业本科生物理创新实验,帮助大学生掌握光纤传感原理、实验技能和数据处理与分析方法.