GDME-based methodology for the determination of free formaldehyde in cosmetics and hygiene products containing formaldehyde releasers

Analytical and Bioanalytical Chemistry - Formaldehyde is often applied in the industrial production of different products, such as textiles, insulation materials, or cosmetics, due to its...     

A sequential injection system for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples.

A sequential injection methodology for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples is proposed. A single manifold is used for the determination of the three analytes, and the same protocol sequence allows the sequential determination of calcium and magnesium (the sum corresponds to the water hardness). The determination of both metals is based on their reaction with cresolphtalein complexone; mutual interference is minimized by using 8-hydroxyquinoline for the determination of calcium and ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) for the determination of magnesium. Alkalinity determination is based on a reaction with acetic acid, and corresponding color change of Bromcresol Green. Working ranges of 0.5 - 5 mg dm(-3) for Ca, 0.5 - 10 mg dm(-3) for Mg, and 10 - 100 mg HCO3- dm(-3), for alkalinity have been achieved. The results for water samples were comparable to those of the reference methods and to a certified reference water sample. RSDs lower than 5% were obtained, a low reagent consumption and a reduced volume of effluent have been accomplished. The determination rate for calcium and magnesium is 80 h(-1), corresponding to 40 h(-1) per element, while 65 determinations of alkalinity per hour could be carried out.     

Localising gravity in composite monopole brane worlds without bulk cosmological constant

We study a 7-dimensional brane world scenario with a Ricci-flat 3-brane residing in the core of a composite monopole defect, i.e., a defect composed of a 't Hooft–Polyakov and a global monopole. Admitting a direct interaction between the two bosonic sectors of the theory, we analyse the structure of the space–time in the limits of small, respectively large direct interaction coupling constant. For large direct interaction, the global monopole disappears from the system and leaves behind a negative cosmological constant in the bulk such that gravity-localising solutions are possible without a priori introduction of a bulk cosmological constant.     

Photothermal microanalysis of thermal discontinuities in metallic samples

Modeling the behavior of a protective coating during a thermal shock not only requires the knowledge of its own thermophysical characteristics, but also those of the coating–substrate discontinuity. According to its nature, this discontinuity can be modeled as a zero-thickness interface (thermal contact resistance) or a finite thickness layer (thermal third body). This paper presents an experimental device and two associated thermal transfer models developed in view of the microscale characterization of such discontinuities.     

Lightly crosslinked,mesomorphic networks obtained through the reaction of dimeric,liquid‐crystalline epoxy–imine monomers and heptanedioic acid

We reacted various dimeric, liquid‐crystalline epoxy–imine monomers, differing in the length of the central aliphatic spacer or the dipolar moments, with heptanedioic acid. The resulting systems showed a liquid‐crystalline phase in some cases, depending on the dimer and on the reaction conditions. The systems were characterized with respect to their mesomorphic properties and then were submitted to dynamic mechanical thermal analysis in both fixed‐frequency and frequency‐sweep modes in the shear sandwich configuration. The arrangement in the liquid‐crystalline phase seemed to be mainly affected both by the polarization of the mesogen and by the reaction temperature, which favored the liquid‐crystalline arrangement when it was lying in the range of stability of the dimer mesophase. In agreement with other recent literature data, dynamic mechanical thermal analysis results suggested that the presence of the mesogen directly incorporated into the main chain increased the lifetimes of the elastic modes both in the isotropic phase and in the liquid‐crystalline phase with respect to side‐chain liquid‐crystalline elastomers and that the time–temperature superposition principle did not hold through the liquid‐crystalline‐to‐isotropic transition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6270–6286, 2006     

N,N‐dimethylaminopyridine as initiator in the copolymerization of diglycidylether of bisphenol A with six‐membered cyclic carbonates

N,N‐Dimethylaminopyridine (DMAP) was used as initiator to cure mixtures of diglycidylether of bisphenol A (DGEBA) and 1,3‐dioxan‐2‐one (TMC) or 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DMTMC). The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing. We observed the formation of five‐membered cyclic carbonates and anionic carbonate groups that remain unreacted at the chain ends. The formation of these groups was explained by the attack of the anionic propagation species on the methylene carbon of the carbonate group, which leads to an alkyl‐oxygen rupture. By performing the cure in the thermobalance we could evaluate the loss of CO₂ produced in the samples containing carbonates. The kinetics were studied by DSC and analyzed with isoconversional procedures. The addition of carbonates slows down the curing rate. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the materials obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2873–2882, 2006     

Observation of baker’s yeast strains used in biotransformation by atomic force microscopy

Different strains of baker’s yeast(Saccharomyces cerevisiae) were imaged with an atomic force microscope (AFM). The images of uncoated and nonfixed samples were reproducible with high-constrast and nanometer-resolution. Molecules from the polysaccharide surface of the cell wall were pictured and the distance of atoms was measured. The preparation of samples was easy, suggesting that AFM is a useful tool in this type of analyses.     

Evaluation of isothermal kinetic of sweetener

Summary Sulfonylureas are widely used for the treatment of non-insulin dependent diabetes mellitus. Glibenclamide belongs to the group of substituted arylsulfonylureas. Many representative of this group shows polymorphism. The purpose of this work was to investigate the thermal behaviour and compatibility between glibenclamide and some excipients using thermoanalytical techniques (TG-DTG/DSC). The thermal and isothermal kinetics data showed incompatibility between glibenclamide and magnesium stearate.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Quantum mechanical valence study of a bond-breaking–bond-forming process in triatomic systems

The recently introduced set of the quadratic, two-electron covalent and ionic valence indices is used to investigate the bond-breaking–bond-forming (BB-BF ) process in an atom exchange reaction between H₂ and X (X = H, F—I) as well as in the O₂—H system. Valence changes accompanying selected charge reorganizations are examined within the three-orbital model and valence diagrams for symmetric transition states (TS s) are given. The UHF valence data for Li₂O and CO₂ and the H—H—X, O—O—H, and O—H—O (ABC) TS s (collinear and angular) are reported and compared to valence data in the separated fragments limits (SFL ), AB and BC. The overall valence, ν(ABC), and the total (ionic plus covalent) diatomic valences, ν_AB and ν_BC, are used as measures of the overall bond-order in a concerted BB–BF reaction, to test the postulate of the bond-energy–bond-order (BEBO ) model. In collinear TS s of H₂X, ν ? ?1, i.e., one bonding electron pari, is found to be roughly preserved, whereas in the angular H₂X and in collinear O—H—O TS s, the effect of increased valence at the saddle-point is observed, relative to that of diatomic fragments (reactiants or products). For the angular O—O—H TS , a similar increase in | ν (ABC)| relative to both O₂ and OH SFL s is detected; smaller changes relative to the O₂ data are found in the collinear TS . This observation is in agreement with earlier predictions from the intersecting-state model. The relative diatomic valences, ν/ν and ν/ν, are shown to conserve the overall relative bond multiplicity around 1 in both collinear and angular TS s of the H₂—X systems. © 1994 John Wiley & Sons, Inc.